Fluke 80i-110s Handleiding

Fluke Niet gecategoriseerd 80i-110s

Lees hieronder de 📖 handleiding in het Nederlandse voor Fluke 80i-110s (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

PN 4862926 October 2005, Rev. 1, 1/17

subject to change without notification.

All product names are trademarks of their

respective companies.

80i-110s

AC/DC Current Probe

Instructions

Introduction

The Fluke 80i-110s (the Probe or Product) is a clamp-on AC/DC Current

Probe that reproduces current waveforms found in commercial and industrial

power distribution systems. The Probe performance is optimized for accurate

reproduction of currents at line frequency and up to the 50

harmonic

waveform. The 80i-110s is also compatible with any instrument capable of

millivolt measurements.

The Probe provides these benefits:

• Accurate AC, DC, and AC+DC current measurements for Electrical,

Electronic, and Automotive applications.

• Shielded for high-noise immunity around electronic motor drives and

ignition systems.

• Wide measurement range from 50 mA to 100 A, useful to 10 mA.

• Jaw shaped for easy access to cramped spaces.

• Tactile barrier (see Figure 1, item

).

• Safety-designed 600 V insuIated BNC - compatible with Fluke

ScopeMeter

test tools, Power Harmonic analyzers, and

oscilloscopes.

• Selectable output of 10 millivolts/1 amp for the 100 A range, and

100 mV/1 A for the 10 A range.

Figure 1. 80i-110s AC/DC Current Probe

How to Contact Fluke

To contact Fluke, call one of the following telephone numbers:

• Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)

• Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)

• Canada: 1-800-36-FLUKE (1-800-363-5853)

• Europe: +31 402-675-200

• Japan: +81-3-6714-3114

• Singapore: +65-6799-5566

• Anywhere in the world: +1-425-446-5500

To view, print, or download the latest manual supplement, visit

http://us.fluke.com/usen/support/manuals.

Go to www.fluke.com to register your product and find more information.

Safety

A Warning identifies conditions and procedures that are dangerous to the

user.

Warning

To prevent personal injury and for safe operation of the Product:

• Read all safety information before you use the Product.

• Carefully read all instructions.

• Do not use the Product if it is altered or damaged.

• Do not alter the Product and use only as specified, or the

protection supplied by the Product can be compromised.

• Comply with local and national safety codes. Use personal

protective equipment (approved rubber gloves, face

protection, and flame-resistant clothes) to prevent shock and

arc blast injury where hazardous live conductors are

exposed.

• Hold the Product behind the tactile barrier.

• Before each use, examine the Product. Look for cracks or

missing pieces of the clamp housing or output cable

insulation. Also look for loose or weakened components.

Carefully examine the insulation around the jaws.

• Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.

• Use the Clamp only on insulated conductors. Use caution

around bare conductors or bus bars. To prevent electrical

shock, do not touch the conductor.

Symbols

Before You Start

These items are included in the shipment box:

• AC/DC Current Probe, 80i-110s

• Instructions (this document)

• 9 volt Battery, type IEC 6LR61

Check the contents of the box for completeness. If something in the box is

damaged or missing, contact your distributor or the nearest sales or service

office.

Symbol Definition



WARNING - RISK OF DANGER.



WARNING. HAZARDOUS VOLTAGE. Risk of electric shock.



Consult user documentation.



Double Insulated



Earth



Battery



Application around and removal from uninsulated hazardous live

conductors is permitted.



Conforms to European Union directives.



Conforms to relevant Australian Safety and EMC standards.



Measurement Category III is applicable to test and measuring

circuits connected to the distribution part of the building’s low-

voltage MAINS installation.



This product complies with the WEEE Directive marking

requirements. The affixed label indicates that you must not

discard this electrical/electronic product in domestic household

waste. Product Category: With reference to the equipment types

in the WEEE Directive Annex I, this product is classed as

category 9 "Monitoring and Control Instrumentation" product. Do

not dispose of this product as unsorted municipal waste.

Product specificaties

Merk:	Fluke
Categorie:	Niet gecategoriseerd
Model:	80i-110s
Kleur van het product:	Zwart
Gewicht:	330 g
Snoerlengte:	1.6 m
Interface:	Banaanstekker
Aantal per verpakking:	1 stuk(s)
Lengte:	231 mm
Temperatuur bij opslag:	-30 - 70 °C
Aansluiting(en):	BNC
Maximale hoogte, in gebruik:	2000 m
Bedrijfstemperatuur (T-T):	0 - 50 °C
Type product:	Stroomtang
Spanningclassificatie:	600 V
Stroom (max.):	100 A
Ondersteunde meetcategorieën:	CAT II, CAT III