Fluke 700HTH Handleiding

Fluke Niet gecategoriseerd 700HTH

Lees hieronder de 📖 handleiding in het Nederlandse voor Fluke 700HTH (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
®
PN 1567805 April 2000
©2000 Fluke Corporation. All rights reserved. Printed in U.S.A.
1
Fluke-700HTH
Hydraulic Test Hose
Instruction Sheet
Introduction
The Fluke-700HTH Hydraulic Test Hose augments the
Fluke-700HTP Hydraulic Test Pump. It is self-sealing, with
an easy, finger-tight connection, and very low volumetric
expansion. The 10,000 psi / 700 bar working pressure hose
features stainless steel and nylon construction, and is
suitable for oil and water. The hose has the following
specifications:
• Working pressure: 700 bar / 10,000 psi
• Minimum burst pressure: 2500 bar / 36,200 psi
• Minimum bend radius: 60 mm / 2.36 in.
• Working temperature: - 30 C to + 80   C
( - 22 îšž F to + 176 îšž F)
• Construction: nylon, stainless steel, brass, PTFE, and
nitrile
• Outer diameter: 6.9 mm (0.27 in.)
• Bore: 3.2 mm (0.13 in.)
• Fluids: water, oil
Box Contents
• (1) 1 m (3.3 ft) self-sealing hose assembly
• (1) Stainless steel test point
• (1) Stainless steel gauge adapter
• (2) Bonded seals
• (2) Adapters: 1/4 in. NPT male to 1/4 in. NPT male
1/4 in. NPT male to 1/8 in. NPT male
• (4) Nylon seals
• Instruction Sheet
How to Contact Fluke
To contact Fluke, call one of the following numbers:
USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36 FLUKE (1-800-363-5853)
Europe: +31 402-678-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-356-5500
Visit us on the World Wide Web at: www.uke.com
6 mm
Test Pressure
Port
Hose assembly
Gauge adapter
Nylon
seal
Test point
For under head sealing, use bonded seal
Nylon
seal
Guidelines for Use
W Warning
To prevent personal injury, do not exceed
working pressure and ensure that all
connections are made correctly. Pressure built
up internally during use can be extremely high.
Uncontrolled release of high pressure can be
hazardous to individuals and may cause
damage to equipment.
1. Connect test point to the test pressure port of the
Fluke-700HTP pump with nylon seal provided.
2. Connect gauge adapter to item under test using nylon
seal provided.
Fluke-700HTH
Instruction Sheet
2
3. Ensure hose connections are fully screwed down onto
test points and gauge adapters before applying
pressure.
4. Only use oil or water.
5. Do not attempt to use hose if there are any signs of
damage to the outer covering, i.e., cuts, kinks, etc.
6. bend hose more than the minimum bend radiusDo not
of 60 mm (2.36 inches).
7. attempt to connect or disconnect the hose whileDo not
under pressures greater than 200 bar.
Limited Warranty and Limitation of Liability
This Fluke product will be free from defects in material and
workmanship for one year from the date of purchase. This warranty
does not cover fuses, disposable batteries, or damage from
accident, neglect, misuse, alteration, contamination, or abnormal
conditions of operation or handling. Resellers are not authorized to
extend any other warranty on Fluke’s behalf. To obtain service
during the warranty period, contact your nearest Fluke authorized
service center to obtain return authorization information, then send
the product to that Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT
LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM
ANY CAUSE OR THEORY. Since some states or countries do not
allow the exclusion or limitation of an implied warranty or of
incidental or consequential damages, this limitation of liability may
not apply to you.
Fluke Corporation Fluke Europe B.V.
P.O. Box 9090 P.O. Box 1186
Everett, WA 98206-9090 5602 BD Eindhoven
U.S.A. The Netherlands

Product specificaties

Merk: Fluke
Categorie: Niet gecategoriseerd
Model: 700HTH

Heb je hulp nodig?

Als je hulp nodig hebt met Fluke 700HTH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Fluke

Fluke

Fluke ii500 Handleiding

7 Oktober 2024
Fluke

Fluke iSee TC01A Handleiding

9 September 2024
Fluke

Fluke P5515 Handleiding

8 Juli 2024
Fluke

Fluke TiX885 Handleiding

7 December 2023
Fluke

Fluke TiX875 Handleiding

7 December 2023
Fluke

Fluke TiX880 Handleiding

7 December 2023
Fluke

Fluke TiX870 Handleiding

7 December 2023
Fluke

Fluke EI-162BN Handleiding

9 Augustus 2023
Fluke

Fluke CNX C3003 Handleiding

8 Augustus 2023
Fluke

Fluke 80i-2010s Handleiding

8 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Electrolux

Electrolux STA9 Handleiding

23 November 2024
Electrolux

Electrolux UMP3 Handleiding

23 November 2024
Electrolux

Electrolux ZS70GL Handleiding

23 November 2024
Bosch

Bosch HEZ8TK36UC Handleiding

23 November 2024
Bosch

Bosch HEZ8ZZ36UC Handleiding

23 November 2024
Bosch

Bosch HDZIT301 Handleiding

23 November 2024
Bosch

Bosch HEZBS301 Handleiding

23 November 2024
LG

LG LX-330 Handleiding

23 November 2024
Stamos

Stamos S-PLASMA 60U Handleiding

23 November 2024
Bosch

Bosch KSZ2AVU00 Handleiding

22 November 2024