Fluke 438-II Handleiding

Fluke Niet gecategoriseerd 438-II

Lees hieronder de 📖 handleiding in het Nederlandse voor Fluke 438-II (18 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/18

March 2016 Rev. 1, 10/17

All product names are trademarks of their respective companies.

438-II

Motor Analyzer

Users Manual

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The

warranty period is three years and begins on the date of shipment. Parts, product repairs, and services are warranted for 90

days. This warranty extends only to the original buyer or end-user customer of a Fluke authorized reseller, and does not

apply to fuses, disposable batteries, or to any product which, in Fluke's opinion, has been misused, altered, neglected,

contaminated, or damaged by accident or abnormal conditions of operation or handling. Fluke warrants that software will

operate substantially in accordance with its functional specifications for 90 days and that it has been properly recorded on

non-defective media. Fluke does not warrant that software will be error free or operate without interruption.

Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but have no

authority to extend a greater or different warranty on behalf of Fluke. Warranty support is available only if product is

purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international price. Fluke reserves the

right to invoice Buyer for importation costs of repair/replac in one country is submitted ement parts when product purchased

for repair in another country.

Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or

replacement of a defective product which is returned to a Fluke authorized service center within the warranty period.

To obtain warranty service, contact your nearest Fluke authorized service center to obtain return authorization information,

then send the product to that service center, with a description of the difficulty, postage and insurance prepaid (FOB

Destination). Fluke assumes no risk for damage in transit. Following warranty repair, the product will be returned to Buyer,

transportation prepaid (FOB Destination). If Fluke determines that failure was caused by neglect, misuse, contamination,

alteration, accident, or abnormal condition ltage failures caused by use outside of operation or handling, including overvo

the product’s specified rating, or normal wear and tear of mec ovide an estimate of repair hanical components, Fluke will pr

costs and obtain authorization before commencing the work. Following repair, the product will be returned to the Buyer

transportation prepaid and the Buyer will be billed for the repair and return transportation charges (FOB Shipping Point).

THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT,

INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY

CAUSE OR THEORY.

Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of

incidental or consequential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any

provision of this Warranty is held invalid or unenforceable by a court or other decision-maker of competent jurisdiction, such

holding will not affect the validity or enforceability of any other provision.

11/99

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

Title Page

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

How to Contact Fluke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

In The Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Motor Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Motor Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Unit Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Set Analyzer Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Trend Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Motor Analyzer Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Mechanical Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Electrical Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

View Analyzer Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Meter Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Trend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Derating Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Voltage Unbalance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Voltage Harmonics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Table of Contents

Product specificaties

Merk:	Fluke
Categorie:	Niet gecategoriseerd
Model:	438-II
Ingebouwd display:	Ja
Gebruikershandleiding:	Ja
Internationale veiligheidscode (IP):	IP51
Beeldschermdiagonaal:	- "
Resolutie:	320 x 240 Pixels
Display technologie:	LCD
Opbergetui:	Ja
Temperatuur bij opslag:	-20 - 60 °C
Frequentie:	40 - 70 Hz
Luchtvochtigheid bij opslag:	0 - 95 procent
Hoogte, in bedrijf:	0 - 3000 m
Hoogte bij opslag:	0 - 12000 m
Mini-USB ports hoeveelheid:	1
Efficientie:	100 procent
Wifi:	Ja
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 45 procent
Type product:	Kwaliteitsanalysator van voeding & motor
Batterijtechnologie:	Alkaline
Meetkabels:	Ja
Spanningsmeetresolutie:	0.01 V
Dips/onderbrekingen:	Ja