First Alert 2096DF Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor First Alert 2096DF (26 pagina's) in de categorie Kluis. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/26
2096DF-BD
Manual # M08-0282-009
Manual # M08-0282-009
www.FirstAlert.com
DIGITAL WATERPROOF
FIRE SaFE wIth REady-SEal
Operation & Installation Guide
1 2
Index / Overview of Your Safe Overview of Your Safe
Index
Overview of Your Safe 1
.................................................................................................
Opening Your Safe for the First Time 3
........................................................................
Test Locking System 4
....................................................................................................
Programming a Personal Passcode 6
..........................................................................
Emergency Override Key / Battery Replacement 7
..................................................
Additional Features 7
.....................................................................................................
Use, Care and Maintenance 8
.......................................................................................
Consumer Aairs 10
.......................................................................................................
Handy Hauler® Handle and Wheels 12
........................................................................
Safe Identication Record 12
........................................................................................
Limited Warranty .......................................................................................................
13
For Your ProtectIon
a Do not remove the serial number tag from the safe.
a Store emergency override keys away from safe, NEVER INSIDE.
a Record all safe identication numbers on Safe Identication Record on page 12.
a Save this manual and NEVER keep it inside the safe.
oVerVIeW oF Your SAFe
Congratulations!
Your new First Alert® Digital Waterproof Fire Safe with Ready-Seal™ will provide
years of safe and secure protection for your valuables, important documents and
other personal items. All First Alert® safes are designed and built using the highest
manufacturing standards to ensure maximum user satisfaction under a variety of
conditions. With proper care, your First Alert® safe will provide peace of mind for
many years to come.
Package contents
ReaDy-seal Mounting HaRDwaRe coMPonents
6 Flathead Cover
Screws
2 Emergency
Override Keys
1 Exterior Fire/Water
Gasket
1 Bolt Cover
2 Adjustable Shelves
1 Plastic
Bottom Cover
1 Ready-Seal™
Mounting Template
1 Interior Fire/Water
Gasket
4 AA Batteries
6 Flathead Bottom
Cover Screws
1 Bolt
Handle Tool
1 Mounting Bolt with
Flat Washer
1 Removable
File Rack
6 Buttonhead Floor
Mounting Bracket Screws
1 Ready-Seal™
Mounting Instructions
1 Upper Water Seal
1 Handy Hauler® with
Plastic Screw Covers
1 Floor Mounting
Bracket
0-XZL-1
L-10-XZ
x6 x6
x6
COMPONENTS PACKED SEPARATELY IN BAG
COMPONENTS INSTALLED IN SAFE
3 4
Opening Your Safe For The First Time Test Locking System
oPenIng Your SAFe For the FIrSt tIme
ImPortAnt FIRST TIME ACTIVATION
Your safe is ready for activation. To open the safe and prevent it from locking
before completing the rst-time activation, a solenoid deactivation safety
device has been installed.
BAT TERIES AND EMERGENCY OVERRIDE KEYS
Remove four (4) AA batteries and two (2) Emergency Override Keys. They are
located in the protective styrofoam insert at the top of the box.
USER ACTIVATION
Install Batteries
1 Turn handle upwards to the right and
pull open the safe door. Note: This
waterproof safe may require additional
force upon initial entry.
2 Slide the battery compartment cover
forward and remove. The compartment
is located inside the safe at the top of
the door. Install the four (4) AA batteries.
Make sure the batteries are installed in
the proper direction as indicated in the
battery compartment. Slide the cover
back into place.
3 After the batteries are correctly installed,
the red and green lights located at
the top of the keypad on the front of
the safe will blink twice, the keypad
backlight will ash once and you will
hear a single beep.
4 Proceed to Activate Lock.
ImPortAnt ENABLE/DISABLE SOUND
Once the batteries are installed, if you do not hear a beep when entering the
factory pre-set passcode or during the personal passcode re-programming
process, enter the following key sequence into the digital keypad:
#*#
ACTIVATE LOCK
1 Locate the small plastic Locking Pin on the
inside of the safe door. Grip and pull out
completely then dispose of properly.
2 Leave the safe door open and proceed to
Electronic Locking System Test.
teSt lockIng SYStem
ELECTRONIC LOCKING SYSTEM TEST
With the door still open, you can test the Electronic Digital Lock by manually
activating the Locking System.
To activate the Locking System, locate the locking push button on the inside of
the safe door, push it in and turn the handle to the left. This will cause the live door
bolts to extend out and into the locked position. Now with the door open and the
live door bolts in the locked position, you may proceed to Testing the Passcode.
ImPortAnt ENGAGING LIVE BOLTS
Closing the safe door with the Live Bolts in the locked position can damage
the safe. The locking push button should only be used when testing or
programming the safe with the door remaining open.
1
4
7
2
5
8
0
3
6
9
#
BAT TERY CONFIGURATION
+
+ –
1
4
7
2
5
8
0
3
6
9
#
Green Light
Keypad
Backlight
Red Light
This will turn the sound on. Repeat the
process if you want the sound turned o.
1
4
7
2
5
8
0
3
6
9
#
Locking Push Button
Locking Push Button
Extended Live BoltsDead Bolt
Dead Bolt Extended Live Bolts


Product specificaties

Merk: First Alert
Categorie: Kluis
Model: 2096DF

Heb je hulp nodig?

Als je hulp nodig hebt met First Alert 2096DF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Kluis First Alert

Handleiding Kluis

Nieuwste handleidingen voor Kluis