Finlux ID-F610 Handleiding

Finlux Speaker ID-F610

Lees hieronder de 📖 handleiding in het Nederlandse voor Finlux ID-F610 (7 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
DOCKING SYSTEM
DIGITAL MICRO HI-FI SYSTEM
OPERATING INSTRUCTIONS
MODEL: Z-255-AFPADi
WA R N I N G : To red u c e
the risk of electric shock, do
not remove cover (or back).
N o u s e r - s e r v i c e a b l e
p a r t s i n s i d e . R e f e r
s e rv i c i n g t o q u a l i f i e d
service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
T h e e x c l a m a t i o n
p o i n t w i t h i n t h e
triangle is a warning
sign alerting you of
important instructions
accompanying the
product.
The lightning flash
a n d a r r o w h e a d
within the triangle
i s a w a r n i n g
sign alerting you of
"dangerous voltage"
inside the product.
CAUTION
DO NOT EXPOSE TO DRIPPING
OR SPLASHING LIQUIDS!
NOTE: CAUTION SYMBOLS ARE PRINTED ON REAR OF UNIT.
PLEASE REFER TO INSTRUCTION MANUAL.
E-2
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LASER DE CLASSE
LASER DI PRIMA CLASSE
KLASSE 1 LASER
LASER PRIMERA CLASE
LASER CLASSE 1
KLASSE 1 LASER PRODUKT
CAUTION:
VORSICHT:
VARNING:
ADVARSEL:
ATTNENZIONE:
ACHTUNG:
AVISO:
INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.
UNSICHTBARE LASERSTRAHLUNG TRITT AUS,
WENN DECKEL GEÖFFNET UND WENN SICHERHEITSVERRIEGELUNG
ÜBERBRÜCKT IST. NICHT DEM STRAHL AUSSETZENI.
OSYNLIG LASERSTRÁLNING R DENNA DEL ÄR ÖPPNAD OCH
SPÄRR ÄR URKOPPLAND. STLEN ÄR FARLIG.
USYNLIG LASERSTLING VED ÁBNING. NÁR
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÁ UDS/ETTELSE FOR
STRÁLING.
RADIONS LASER INVISIDILE. NON GUARDARE
DIRETTAMENTE NELLA SORGENTE DEL LASER.
LASERLINSE NICHT BERÜHREN UNSICHTBARER LASERSTRAHL.
A LENTE NUNCA DEVE SER TOCADA.
PLEASE NOTE: YOU WILL FIND THE
RATING LABEL FOR THIS PRODUCT
LOCATED ON THE BOTTOM OF THE UNIT.
CAUTION: GROUNDING OR POLARIZATION. THE PRECAUTIONS
SHOULD BE TAKEN SO THAT THE WIDER BLADE OF THE AC PLUG
MUST MATCH THE SLOT IN RECEPTACLE "WALL SOCKET".
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS.
THE MAINS PLUG IS USED AS THE DISCONNECT DEVICE AND IT SHALL REMAIN
READILY OPERABLE. TO COMPLETELY DISCONNECT THE POWER INPUT, THE MAINS
PLUG OF THE APPARATUS MUST BE DISCONNECTED FROM THE MAINS COMPLETELY.
THE MAINS PLUG SHOULD NOT BE OBSTRUCTED OR SHOULD BE EASILY ACCESSED
DURING INTENDED USE.
REMOTE
CONTROL
PLL
DIGITAL
TUNER
CLOCK
QUARTZ
DIGITAL
BLUE
BACKLIGHT
DISPLAY
MODEL Z-255-AFPADi
ENGLISH MANUAL
SIZE: 102(W) x 136(H)MM
MATERIAL: 80G WOODFREE PAPER
PRINTING COLOR: BLACK
E-3
LOCATION OF CONTROLS
1. CD DOOR
2. DOCKING DOOR
3. DOCKING ADAPTOR
4. SPEAKER (LEFT)
5. LCD DISPLAY
6. ON/ STANDBY KEY
7. BACK/ TUNE DOWN KEY
8. NEXT/ TUNE UP KEY
9. STOP/ CLOCK SET KEY
10. PLAY/ PAUSE/ FM MODE KEY
11. FUNCTION KEY
12. VOLUME DOWN (-)/ MEM - KEY
13. VOLUME UP (+)/ MEM + KEY
14. REMOTE CONTROL SENSOR
15. SPEAKER (RIGHT)
16. FM ANTENNA
17. VIDEO OUT SOCKET
18. SPEAKER OUTPUT SOCKET
(LEFT & RIGHT)
19. AUX IN SOCKET
20. DC JACK SOCKET
E-4
POWER SUPPLY
PREPARATION OF REMOTE CONTROL
-
- REMOVE (GENTLY PULL OUT) THE PLASTIC "TAB" FROM THE BATTERY
COMPARTMENT AT THE REAR OF THE REMOTE CONTROL.
- TEST THE REMOTE CONTROL BY PRESSING THE ON/ STANDBY KEY TO
CHECK THAT THE UNIT SWITCHES ON PROPERLY USING THE REMOTE CONTROL.
THE REMOTE CONTROL UNIT CAN BE FOUND THE BATTERY COMPARTMENT
UNDER THE UNIT.
REMOTE CONTROL:
1. ON/ STANDBY KEY
2. EQ KEY
3. FUNCTION KEY
4. BACK/ TUNE DOWN KEY
5. PLAY/ PAUSE/ FM MODE KEY
6. NEXT/ TUNE UP KEY
7. REPEAT/ SLEEP KEY
8. STOP/ CLOCK SET KEY
9. VOLUME + / MEM + KEY
10. SNOOZE/ TIMER KEY
11. MEM/ PROG. KEY
12. VOLUME - / MEM - KEY
13. BATTERY COMPARTMENT
1 2 3
4
7
10
5
8
11
6
9
12
13
WHEN THE POWER IS THE ENTIRE DIGITAL DISPLAY WILL LIGHT UP WITH
A BACK-LIGHT. THIS INDICATES THE HI-FI IS SWITCHED .
"ON"
"BLUE" "ON"
IMPORTANT : HOW TO TELL IF POWER IS "ON" ?
AC OPERATION (EXTERNAL AC-DC POWER ADAPTOR)
- THIS SET IS EQUIPPED WITH A "DC-JACK" CAPABLE OF ACCEPTING
AC-ADAPTORS WITH A RATING OF DC = 7V, 2.5A, AND WITH A PLUG
WITH THE FOLLOWING POLARITIES AS SHOWN (CENTER POSITIVE) :
- PLEASE USE ONLY THE SUPPLIED AC-ADAPTOR TO OPERATE THE UNIT.
USE OF OTHER ADAPTORS MAY DAMAGE THE UNIT OR CAUSE IT TO MALFUNCTION.
- PLUG THE TAIL END OF THE AC-ADAPTOR INTO THE DC-JACK (SOCKET)
ON THE UNDERNEATH OF THE MAIN UNIT.
- MAKE SURE THE VOLTAGE OF THE AC ADAPTOR OPERATES AT THE SAME VOLTAGE
AS YOUR LOCAL HOUSEHOLD VOLTAGE.
- INSERT THE PLUG AT THE END OF THE POWER CORD INTO THE WALL AC SOCKET.
- PRESS THE "ON/ STANDBY" KEY TO SWITCH ON THE UNIT.
- THIS UNIT IS DESIGNED TO OPERATE WITHOUT EVER BEING TOTALLY POWERED "OFF".
IT WILL EITHER BE "ON" OR IN "STANDBY MODE".
- IN STANDBY MODE, THE BLUE BACK-LIGHT OF THE DIGITAL DISPLAY WILL BE DIMMED
BUT THE DISPLAY WILL SHOW THE CURRENT TIME (CLOCK FUNCTION).
- ANYTIME DURING STANDBY MODE, YOU CAN SWITCH "ON" THE UNIT BY PRESSING
THE "ON/ STANDBY" KEY (ON REMOTE CONTROL OR FRONT PANEL OF THE MAIN UNIT).
- SAVE ENERGY BY SWITCHING THE SYSTEM TO "STANDBY" MODE.
-
-
-
--
+
+
+
++
6 7 8 9 10 11 12 13 14
154
16
18 19 20
1
3
2
5
17
CONNECTION OF SPEAKER BOXES
- UNWRAP THE SPEAKER-CORDS OF BOTH SPEAKER-BOXES AND INSERT THE
LEFT/RIGHT PLUGS INTO SOCKETS IN THE REAR OF MAIN UNIT.
- PLACE THE SPEAKER BOXES AS FAR APART AS POSSIBLE FOR BEST SOUND
EFFECT.
E-6
DIGITAL CLOCK FUNCTION
- THE SET HAS A BUILT-IN DIGITAL CLOCK, WHICH IS DISPLAYED WHEN
THE SET IS IN "STANDBY MODE". (THE DISPLAY WILL CONTINUOUSLY SHOW
THE CURRENT TIME). IN THIS SITUATION THE BLUE BACKLIGHT IS NORMALLY
DIMMED (TO SAVE ELECTRICITY).
HOW TO SET CORRECT TIME:
E-5
*NOTE:
THAT WHEN THE DIGITAL CLOCK IS NOT SET, THE DIGITAL CLOCK DISPLAY SHALL
CONTINUOUSLY FLASH TO INDICATE THAT THE CORRECT TIME HAS NOT YET BEEN SET.
SWITCH UNIT TO "STAND-BY" MODE
PRESS & HOLD FOR 3 SECONDS
DISPLAY SHOWS HOUR OR HOUR (FLASHING)
CLOCK SET
12 24
PRESS TO SELECT 12-HOUR
OR 24-HOUR CLOCK DISPLAY SYSTEM & PRESS TO CONFIRM
YOUR SELECTION
CLOCK SET
PRESS REPEATEDLY TO SET
THE CORRECT IN THE DISPLAY & PRESS TO CONFIRMHOUR CLOCK SET
PRESS REPEATEDLY TO SET
THE CORRECT IN THE DISPLAY & PRESS TO CONFIRMMINUTE CLOCK SET
CORRECT TIME IS NOW SET & WILL BE SHOWN IN THE DISPLAY!
OR TUNE DOWNTUNE UP
OR TUNE DOWNTUNE UP
OR TUNE DOWNTUNE UP
90
MINS
80
MINS
70
MINS
60
MINS
50
MINS OFF*
40
MINS
30
MINS
20
MINS
10
MINS
- THIS SET HAS A SPECIAL SLEEP TIMER FUNCTION WHICH CAN AUTOMATICALLY
SWITCH OFF THE UNIT. THIS IS USEFUL FOR SLEEPING TO MUSIC AT NIGHT.
- AT ANY TIME WHILE THE UNIT IS OPERATING, PRESS & HOLD THE SLEEP KEY UNTIL
THE “ZZZ” ICON & SLEEP _ _ TEXT ARE DISPLAYED. PRESS KEY
(ON REMOTE CONTROL) REPEATEDLY TO CHOOSE THE AUTOMATIC POWER OFF
TIME.
(*OFF MEANS SLEEP TIMER IS DEACTIVATED)
SLEEP
AUTOMATIC POWER OFF SLEEP FUNCTION
AUTOMATIC POWER ON/OFF TIMER FUNCTION
HOW TO SET TIMER
- THIS SET HAS A TIMER FUNCTION TO ENABLE YOU TO PROGRAM THE UNIT TO
AUTOMATICALLY SWITCH ON OR OFF AT PRESET TIMES. THIS IS USEFUL AS A MORNING
ALARM CLOCK :
" " " "
1. ON “STANDBY” MODE, PRESS AND HOLD TIMER KEY (ON REMOTE CONTROL). THE
TIMER ON” SYMBOL APPEARS IN THE DISPLAY.
2. PRESS TO ADJUST THE HOUR OF THE DESIRED "ON"
TIME AND THEN PRESS TIMER KEY TO CONFIRM.
3. PRESS TO ADJUST THE MINUTES OF THE DESIRED
"ON" TIME AND THEN PRESS TIMER TO CONFIRM.
4. NOW THE WORDING IN THE DISPLAY CHANGES TO SHOW .
5. PRESS TO ADJUST THE HOUR OF THE
DESIRED "OFF" TIME AND THEN PRESS TIMER TO CONFIRM.
6. PRESS TO ADJUST THE MINUTES OF THE DESIRED
"OFF" TIME AND THEN PRESS TIMER TO CONFIRM.
7. NOW THE DISPLAY WILL INDICATE THE "WAKE UP MODE" (iPod/ iPhone/ iPad, RADIO or CD).
PRESS TO CHOOSE THE DESIRED MODE & PRESS TIMER TO CONFIRM.
8. THE DISPLAY THEN SHOWS THE "WAKE UP VOLUME LEVEL" (LOUDNESS).
PRESS TO DECREASE OR INCREASE THE VOLUME
LEVEL TO BE USED FOR THE MUSIC TO BE PLAYED WHEN THE TIMER SWITCHES ON
THE UNIT AT THE PRE-SET TIME.
9. PRESS TIMER TO CONFIRM.
TUNE UP OR TUNE DOWN
TUNE UP OR TUNE DOWN
"TIMER OFF"
TUNE UP OR TUNE DOWN KEYS
TUNE UP OR TUNE DOWN
TUNE UP
TUNE UP OR TUNE DOWN
(NOTE : THE AUTOMATIC ON/OFF TIMER WILL SWITCH ON THE UNIT AS IF YOU HAVE
MANUALLY PRESSED THE "ON/ STANDBY KEY. IF YOU HAVE SELECTED "WAKE TO RADIO",
THE EXACT PRESET RADIO BAND & STATION WILL BECOME ACTIVATED WHEN POWER
SWITCHES ON).
"
10. FINALLY THE UNIT WILL RETURN TO THE NORMAL DISPLAY, EXCEPT THAT THE
SYMBOL WILL BE SHOWN, TO INDICATE THAT YOU HAVE PROGRAMMED A ON/OFF
ALARM SETTING.
11. IN CASE YOU WISH TO DISABLE THE TIMER, PRESS THE TIMER KEY ONCE,
& THE SYMBOL WILL DISAPPEARS.


Product specificaties

Merk: Finlux
Categorie: Speaker
Model: ID-F610

Heb je hulp nodig?

Als je hulp nodig hebt met Finlux ID-F610 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Finlux

Handleiding Speaker

Nieuwste handleidingen voor Speaker