Fiio Olympus 2-E10K Handleiding

Fiio Koptelefoon versterker Olympus 2-E10K

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Fiio Olympus 2-E10K (3 pagina's) in de categorie Koptelefoon versterker. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
εΏ«ι€Ÿε…₯ι—¨ζŒ‡ε—
Quick Start Guide
Model No: E10K_TYPE C
English DAC and Headphone Amplifier
Introduction to controls and ports
headphone port
Power/volume knob
Rotate clockwise to turn it on/increase volume;
Rotate anticlockwise to turn it off/decrease volume
USB port
Goaxial digital output port
Gain switch
Line out port
Power indicator light
Operation Instructions
1 Power on/o
Turn the Power/Volume knob clockwise until a click sound is heard to turn on the device; keep
turning clockwise to increase the volume.
Turn anticlockwise to decrease the volume; turn anticlockwise until a click sound is heard to turn o
the device.
2 Connect it to a computer USB
When rst connecting the E10K to a Windows computer, please go to our website to download the
USB DAC driver and follow corresponding instructions to install it. (For MAC OS computers: there
is no need to install the USB DAC driver, so directly select the E10K as the output device.)
Download link: https://www.io.com/supports
Notes: it is recommended to set the system output volume on the computer to the max level and then
adjust the output volume of the E10K with its volume knob.
Notes and Precautions
β˜…In case of a system error, please try to unplug and re-plug the USB cable to resume normal
operation.
β˜…Under USB decoding, it is normal if the line-out and PO output signals at the same time.
β˜…Please take o the headphone from your ears before plugging or unplugging the headphone to
avoid any possible impulsive sound damaging to your hearing.
β˜…Please keep the device away from water and do not repair or disassemble it on your own.
β˜…Your hearing and environmental awareness may be aected when wearing headphones. For your
own safety, please do not wear headphones in dangerous environments.
List of Items Included(Notes: check to make sure all items are included in the package.)
●E10K
●USB data cable
●Isolation feet
●Quick start guide
●Warranty card
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be handed as household or
general waste. It should be handed over to the applicable collection point for the recycling
of electrical and electronic equipment, or returned to the supplier for disposal.
Internal/Supplied Batteries:
This symbol on the battery indicates that the battery is to be collected separately. This battery is
designed for separate collection at an appropriate collection point.
Learn More
To learn more about the product, please visit our website: www.io.com


Product specificaties

Merk: Fiio
Categorie: Koptelefoon versterker
Model: Olympus 2-E10K
Kleur van het product: Zwart
Gewicht: 78 g
Breedte: 49.1 mm
Diepte: 80 mm
Hoogte: 21 mm
Stroombron: DC
Type aansluitplug: 3.5mm
Aantal USB 2.0-poorten: 1
Aansluiting voor netstroomadapter: Ja
Frequentiebereik: 20 - 20000 Hz
Signaal/ruis-verhouding: 105 dB
Totale harmonische vervorming (THD): 0.006 procent
Piekvermogen per kanaal: 0.2 W
Synchronisatie ingangsimpedantie: - Ohm
Output impedance: 1.04 Ohm
Winst: - dB

Heb je hulp nodig?

Als je hulp nodig hebt met Fiio Olympus 2-E10K stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Koptelefoon versterker Fiio

Fiio

Fiio KA3 Handleiding

4 September 2023

Handleiding Koptelefoon versterker

Nieuwste handleidingen voor Koptelefoon versterker