Fibaro FGBRS-001 Handleiding

Fibaro Luchtbevochtiger FGBRS-001

Lees hieronder de 📖 handleiding in het Nederlandse voor Fibaro FGBRS-001 (27 pagina's) in de categorie Luchtbevochtiger. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/27

CONTENTS

#1: Description and features 3

#2: Basic activation 4

#3: Adding to Z-Wave network 5

#4: Removing the device 6

#5: Controlling the temperature 7

#6: Extra temperature sensor 8

#7: Dismounting the device 9

#8: Menu 10

#9: Local protection 11

#10: Head calibration 12

#11: Standby Mode 13

#12: Factory reset 14

#13: Z-Wave range test 15

#14: Battery and charging 16

#15: Normal Schedules 17

#16: Override Schedule 18

#17: Z-Wave specication 19

#18: Advanced parameters 23

#19: Specications 24

#20: Accessory specication (FGBRS-001) 26

#21: Regulations 27

O P E R A T I N G

M A N U A L

v1.0

THE HEAT CONTROLLER

RADIATOR THERMOSTAT

FGT-001

Important safety information

Read this manual before attempting to install the device!

Failure to observe recommendations included in this manual

may be dangerous or cause a violation of the law. The manufacturer,

Fibar Group S.A. will not be held responsible for any loss or damage

resulting from not following the instructions of operating manual.

This product is not a toy. Keep away from children and animals!

CR2032 coin cell battery is harmful if swallowed!

Battery pack warning!

The Heat Controller contains lithium-ion polymer battery pack, heed all

following warnings:

• If an unusual odor or malfunction is detected, avoid sources of

open ame and remove the device from the radiator.

• In the event of damage from crashes, etc., carefully remove to a

safe place for at least a half hour to observe.

• Do not leave the device unattended while charging.

• Do not attempt to replace the battery!

General information about

the FIBARO System

FIBARO is a wireless smart home automation system, based on the

Z-Wave protocol. All of available devices can be controlled through

a computer (PC or Mac), smartphone or tablet. Z-Wave devices are

not only receivers, but can also repeat the signal, increasing the

Z-Wave network’s range. It gives advantage over traditional wireless

systems that require direct link between transmitter and receiver, as

a result the construction of the building could aect network’s range

negatively.

Every Z-Wave network has its unique identication number (home

ID). Multiple independent networks can exist in the building without

interfering. Transmission security of FIBARO System is comparable to

wired systems.

Z-Wave technology is the leading solution in smart home automation.

There is a wide range of Z-Wave devices that are mutually

compatible, independently of manufacturer. It gives the system the

ability to evolve and expand over time. For more information visit:

www.baro.com.

DESCRIPTION AND FEATURES

Main features of FIBARO Heat Controller:

• to be installed on three types of valves: M30 x 1.5, Danfoss RTD-N

and Danfoss RA-N,

• compatible with any Z-Wave or Z-Wave+ Controller,

• supports Z-Wave network Security Modes: S0 with AES-128

encryption and S2 with PRNG-based encryption,

• built-in battery recharged through standard micro-USB port,

• easy installation - no tools required,

• can use a dedicated temperature sensor - FGBRS-001,

• supports heating schedules,

• automatic calibration,

• anti-freeze function,

• decalc function,

• unconstrained rotation spherical knob to set desired temperature.

FIBARO Heat Controller is a remotely controlled thermostatic head

to control temperature in your room. It measures the temperature

and automatically adjust the heat level.

It can be mounted without tools on three types of thermostatic

radiator valves.

You can create schedules via app to easily manage temperature

throughout the week.

#1: Description and features

FIBARO Heat Controller is a fully

compatible Z-Wave PLUS device.

NOTE

This device may be

used with all devices

certied with Z-Wave

Plus certicate and

should be compatible

with such devices pro-

duced by other manu-

facturers.

NOTE

Z-Wave Controller

must support Z-Wave

Security Mode in or-

der to fully utilize the

product.

Product specificaties

Merk:	Fibaro
Categorie:	Luchtbevochtiger
Model:	FGBRS-001
Ingebouwd display:	Nee
Breedte:	38 mm
Diepte:	38 mm
Hoogte:	12 mm
Soort:	Vrijstaand
Connectiviteitstechnologie:	Draadloos
Accu/Batterij voltage:	3 V
Nauwkeurigheid:	0.5 °C
Certificering:	RED 2014/53/EU
Type beeldsensor:	Temperatuursensor
Bedoeld voor:	Binnen
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-10 - 25 °C
Meetbereik temperatuur:	- °C
Bedrijfstemperatuur (T-T):	0 - 40 °C
Type batterij:	CR2032
RF-zendfrequentie:	2400 MHz