Festo VSVA Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Festo VSVA (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Montageanleitung (de)
713 886 / 2007-08NH
†‡
Grundventil
VSVA-B-...-A...-P1
Festo SE & Co. KG
Postfach
D-73726 Esslingen
++49/(0)711/347-0
www.festo.com
1. Teileliste
11347d_1
1 Grundventil (1x)
VSVA-B-...-A...-P1
2 Dichtung VSVA-B-A... (1x)
3 Zylinderschraube (2x)
Bei bistabil:
4 Dichtung VSVA-B (2x)
5 Zylinderschraube (4x)
6 Vorsteuerventil (2x)
Bei monostabil:
4 Dichtung VSVA-B (1x)
5 Zylinderschraube (2x)
6 Vorsteuerventil (1x)
2. Montage Vorsteuerventil auf Grundventil
11347d_3
• Drücken Sie die Dichtun-
gen 4 in die dafür vor-
gesehenen Senkungen im
Grundventil 1.
11347d_4
• Platzieren Sie die Vorsteuer-
ventile 6 auf dem Grund-
ventil 1.
• Drehen Sie die Schrauben 5
fest.
• Halten Sie das Anziehdreh-
moment ein.
3. Montage Dichtung
11347d_2
• Prüfen Sie die Lage der
Dichtung 2 am Grund-
ventil 1.
• Achten Sie dabei auf die
ISO Beschriftung
(! Tabelle).
• Drehen Sie die Dichtung
gegebenenfalls in die
gewünschte Lage.
Beschriftung ISO ISO
Vorsteuerabluft Ungefasst (Standard) Gefasst
Sichtfenster auf Steuerseite 14 Steuerseite 12
Vorsteuerabluft-Anschluss — 12
4. Montage Magnetventil
11347d_5
• Achten Sie auf den einge-
pressten Codierstift (A), um
das Ventil lageorientiert zu
montieren.
• Platzieren Sie das Grundven-
til 1 auf der Ventilinsel.
• Drehen Sie die Schrauben 3
fest.
• Halten Sie das Anziehdreh-
moment ein.
Hinweis
• Beachten Sie zusätzlich alle weiteren Informationen, aus der Pneuma-
tikbeschreibung ihrer Ventilinsel von Festo.
1
2
3
4
5
6
0,8 Nm _ 15%
4
1
6
1
5
2
1
VSVA-B-…
-A1: 2 Nm 10% _
-A2: 1 Nm 10% _
1
3
A
Assembly instructions (en)
713 886 / 2007-08NH
†‡
Basic valve
VSVA-B-...-A...-P1
Festo SE & Co. KG
Postfach
D-73726 Esslingen
++49/(0)711/347-0
www.festo.com
1. Parts list
11347d_1
1 Basic valve (1x)
VSVA-B-...-A...-P1
2 Seal VSVA-B-A... (1x)
3 Socket head screw (2x)
In the case of double solenoid:
4 Seal VSVA-B (2x)
5 Socket head screw (4x)
6 Pilot control valve (2x)
In the case of single solenoid:
4 Seal VSVA-B (1x)
5 Socket head screw (2x)
6 Pilot control valve (1x)
2. Fitting the pilot control valve onto the basic valve
11347d_3
• Press the seals 4 into the
recesses intended for this
purpose in the basic
valve 1.
11347d_4
• Place the pilot control
valves 6 onto the basic
valve 1.
• Tighten the screws 5.
• Maintain the tightening
torque.
3. Fitting the seals
11347d_2
• Check the position of seal 2
on the basic valve 1.
• Note here the ISO inscription
(!Table).
• If necessary, turn the seal
into the desired orientation.
Inscription ISO ISO
Pilot exhaust air Unducted (standard) Ducted
Viewing window at Control side 14 Control side 12
Pilot exhaust air connection — 12
4. Fitting the solenoid valve
11347d_5
• Note the pressed-in coding
pin (A) in order that the valve
can be mounted position-
orientated.
• Place the basic valve 1 on
the valve terminal.
• Tighten the screws 3.
• Maintain the tightening
torque.
Note
• Note also all further information in the pneumatics manual for your
Festo valve terminal.
1
2
3
4
5
6
0.8 Nm _ 15%
4
1
6
1
5
2
1
VSVA-B-…
-A1: 2 Nm 10% _
-A2: 1 Nm 10% _
1
3
A


Product specificaties

Merk: Festo
Categorie: Niet gecategoriseerd
Model: VSVA

Heb je hulp nodig?

Als je hulp nodig hebt met Festo VSVA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Festo

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd