Festo VAVC-Q2-M22C-15-E Handleiding

Festo Niet gecategoriseerd VAVC-Q2-M22C-15-E

Lees hieronder de 📖 handleiding in het Nederlandse voor Festo VAVC-Q2-M22C-15-E (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
VAVC-Q2-M22C
Seal cartridge
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8198768
2023-09d
[8198770]
8198768
Translation of the original instructions
© 2023 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product
èwww.festo.com/sp.
Document Product Content
Operating instruction Pinch valveVZQA-C-M22C –
Operating instruction Pinch valveVZQH –
Tab. 1: Applicable documents
2 Safety
2.1 Safety instructions
–Before carrying out any work on the product: switch off the medium supply and
secure it against being switched back on.
2.2 Intended use
The seal cartridge controls the media flow.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can eval-
uate the work and detect dangers. Personnel must have the relevant mechanical
training.
3 Additional information
–Contact the regional Festo contact if you have technical problems
èwww.festo.com.
–Accessories and spare parts èwww.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1
2
3
Fig.1
1
Seal cartridge(1x)
2
O-ring(2x)
3
Plunger(2x)
4.2 Not in scope of delivery
4
Fig.2
4
Pinch valve(1x)
VZQA-C-M22C, VZQH
5 Assembly
5.1 Preparation
WARNING
Risk of injury from media residues.
• Wear personal protective equipment during assembly work.
1. Remove the pinch valve from the piping4
system è1 Applicable documents.
WARNING
Risk of injury from flying components.
When the cover is opened, the spring inside the valve is suddenly released.
• Secure the cover with a suitable holding device when loosening.
2. For VZQA-C-M22C-25: lock the cover with a suitable holding device, e.g.a7
lever press.
3. Open the pinch valve on the cover with the plug screw.4 7
4. Remove the old seal cartridge in reverse order of assembly.
5.2 Assembly
1. Replace the old seal cartridge with an identical seal cartridge .1
–Check: identical characteristics of seal cartridge and valve .4
–Example: size 15
–Seal cartridge VAVC-Q2-M22C-15-Eè
–Valve VZQA-C-M22C-15-GG-V2V4E-64è
2. Select the grease that is suitable for the installation situation and the media.
3. Select the cleaning agent that is suitable for the installation situation and the
media.
4. Clean the pipe with a lint-free cleaning cloth.5
7
16
5
2
Fig. 3: Assembling seal cartridge
1. Grease the flange of the seal cartridge .6 1
2. Push the seal cartridge into the pipe .1 5
3. Mount the O-rings on both covers .2 7
3
8
Fig. 4: Assembly of plungers
1. Grease the plungers .3
2. Make sure the plungers are aligned.3
VAVC-Q2-M22C-6 VAVC-Q2-M22C-15 VAVC-Q2-M22C-25
3. Push the plungers into the ports .3 8
5
9
Fig. 5: Assembly of return piece
1. Grease the outside of the pipe .5
2. Grease the inside of the return piece .9
3. Slide the return piece onto the pipe .9 5
9
10
Fig. 6: Assembly of compression spring
1. Check the compression spring for external damage. If necessary, replaceaJ
the compression spring aJè3 Additional information.
2. Slide the compression spring onto the return piece .aJ 9
11
9
Fig. 7: Assembly of sleeve
For VAVC-Q2-M22C-15 only:
1. Check the sleeve for external damage. If necessary, replace the sleeveaA aA
è3 Additional information.
2. Make sure the sleeve is aligned.aA
3. Slide the sleeve onto the return piece .aA 9
9
12
Fig. 8: Assembly of housing
1. Clean the inside of the housing with a lint-free cleaning cloth.aB
2. Grease the inside of the housing .aB
3. Slide the housing to the stop.aB
7
Fig. 9: Mounting cover
1. Grease the male thread of the cover
7.
2. Tighten the cover .7
Cover7
7
7
77
VZQA-...-...V4 VZQA-...-...AL VZQH
VAVC-Q2-M22C-6 32 [Nm] 15±10 5±10 15±10ß% % %
VAVC-Q2-
M22C-15
ß50 [Nm] 40±10 40±10 –% %
VAVC-Q2-
M22C-25
ß85 [Nm] 40±10 40±10 –% %
3. Check that the valve is leak-proof.4
4. Install the valve in the piping system 4è1 Applicable documents.


Product specificaties

Merk: Festo
Categorie: Niet gecategoriseerd
Model: VAVC-Q2-M22C-15-E

Heb je hulp nodig?

Als je hulp nodig hebt met Festo VAVC-Q2-M22C-15-E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Festo

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd