Festo EAHF-E24-60-P-S Handleiding

Festo Niet gecategoriseerd EAHF-E24-60-P-S

Lees hieronder de 📖 handleiding in het Nederlandse voor Festo EAHF-E24-60-P-S (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
EAHF-E24-...-P-S
Profile mounting
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8203075
2023-12
[8203077]
8203075
Translation of the original instructions
© 2024 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product
èwww.festo.com/sp.
Document Product Content
Operating instruction Axis ELGD –
Tab. 1: Applicable documents
2 Safety
2.1 Safety instructions
–Only mount the product on components that are in a condition to be safely
operated.
2.2 Intended use
The profile mounting attaches an axis ELGD to a mounting surface by the basic
profile.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can eval-
uate the work and detect dangers. Personnel must have the relevant mechanical
training.
3 Additional information
–Contact the regional Festo contact if you have technical problems
èwww.festo.com.
–Accessories èwww.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1
Fig. 1: Scope of delivery
1
Profile mounting (2x)
4.2 Not in scope of delivery
2
3
Fig. 2: Not included in the scope of
delivery
2
Axis ELGD (1x)
3
M6 screw (2x)
5 Assembly
Fig. 3: Determine support spacings and mounting points
• Determine the required support spacingsL and the mounting points of the
axis Other applicable documents.è
1
2
A
B
Fig. 4: Positioning profile mountings
• Position the profile mountings[1] at the mounting points.
ÄThe lug[A] lies in the slot[B] of the axis[2].
1
3
2
Fig. 5: Installing profile mountings
1. Select the suitable screws[3] for the installation situation.
2. Press the profile mounting[1] against the axis[2].
ÄThe profile mounting[1] is flush with the axis[2].
3. Fasten the profile mountings[1] on the mounting surface with the screws[3].
Maximum tightening torque:7.6Nm
4. Repeat the mounting steps for all mounting points.


Product specificaties

Merk: Festo
Categorie: Niet gecategoriseerd
Model: EAHF-E24-60-P-S

Heb je hulp nodig?

Als je hulp nodig hebt met Festo EAHF-E24-60-P-S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Festo

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd