Festo DASP-V4-8-A-R1 Handleiding

Festo Niet gecategoriseerd DASP-V4-8-A-R1

Lees hieronder de 📖 handleiding in het Nederlandse voor Festo DASP-V4-8-A-R1 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
DASP-V4-...-A-R1
Sensor mounting
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8179836
2022-11
[8179838]
8179836
Translation of the original instructions
© 2022 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product
èwww.festo.com/sp.
Document Product Contents
Operating instruction Proximity switch
CRSMT-8M-PS-24V-K-...
–
Tab. 1: Applicable documents
2 Safety
2.1 Safety instructions
–Only mount the product on components that are in a condition to be safely
operated.
2.2 Intended use
–The sensor mountingDASP-V4-8-A-R1 fastens proximity switches to the tie
rods of the standards-based cylinders CRDNG-32...-63.
–The sensor mountingDASP-V4-12-A-R1 fastens proximity switches to the tie
rods of the standards-based cylinders CRDNG-80...-125.
3 Additional information
–Contact the regional Festo contact if you have technical problems
èwww.festo.com.
–Accessories èwww.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1
2
Fig.1
1
Sensor mounting (1x)
2
Threaded pin (1x)
4.2 Not in scope of delivery
3
4
Fig.2
3
Standards-based cylinder (1x)
CRDNG
4
Proximity switch (1x)
CRSMT-8M
5 Assembly
1
2
4
A
Fig.3
1. Position the sensor mounting on one of the tie rods[A].1
2. Lightly fix the sensor mounting with the threaded pin .1 2
3. Orient the proximity switch with the cable outlet to the centre of the4
cylinder so all switching positions are possible.
4. Place the proximity switch in the sensor mounting.4
1
4
Fig.4
1. Tighten the screw of the proximity switch .4
–Spanner size: 1.5
–Tightening torque:0.3Nm±20%
2. Position the sensor mounting and the proximity switch at the desired1 4
switching position.
2
Fig.5
•Tighten the threaded pin . Tightening torque:0.8Nm±25%2


Product specificaties

Merk: Festo
Categorie: Niet gecategoriseerd
Model: DASP-V4-8-A-R1

Heb je hulp nodig?

Als je hulp nodig hebt met Festo DASP-V4-8-A-R1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Festo

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd