Festo DARF-Q13-16-1 Handleiding

Festo Niet gecategoriseerd DARF-Q13-16-1

Lees hieronder de 📖 handleiding in het Nederlandse voor Festo DARF-Q13-16-1 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
DARF-Q13-...-1
Push-on flange
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8182529
2023-10
[8182531]
8182529
Translation of the original instructions
© 2023 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product
èwww.festo.com/sp.
Document Product Content
Operating instruction Quarter turn actuatorDRRS –
Tab. 1: Applicable documents
2 Safety
2.1 Safety instructions
–Before working on the product, switch off the compressed air supply and lock it
to prevent it from being switched on again.
2.2 Intended use
The push-on flange attaches the payload to the flange shaft of the
quarter turn actuator DRRS.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can
evaluate the work and detect dangers. The qualified personnel have knowledge
and experience in dealing with pneumatic drives and pneumatic axes.
3 Additional information
–Contact the regional Festo contact if you have technical problems
èwww.festo.com.
–Accessories and spare parts èwww.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1
2
3
Fig. 1: Scope of delivery
1
Screw (4x)
2
Push-on flange (1x)
3
Centring sleeve (2x)
4.2 Not in scope of delivery
4
Fig. 2: Not included in the scope of
delivery
4
Quarter turn actuator (1x)
DRRS
5 Assembly
3
4
2
Fig. 3: Positioning centring sleeves
The push-on flange[2] can be mounted with an offset of 90° on the flange shaft of
the quarter turn actuator[4].
1. Position the centring sleeves[3].
2. Position the push-on flange[2] centrally.
1
2
Fig. 4: Mounting push-on flange
• Mount the push-on flange[2] with the screws[1]. Observe tightening torque.
DARF-Q13-...-1 -12 -16 -20 -25
Screw M3x8 M4x10 M4x12 M5x12
Tightening torque [Nm] 1.2±20% 2.3±20% 3.2±25% 5.6±25%


Product specificaties

Merk: Festo
Categorie: Niet gecategoriseerd
Model: DARF-Q13-16-1

Heb je hulp nodig?

Als je hulp nodig hebt met Festo DARF-Q13-16-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Festo

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd