Ferm FLS-400 Kluis Handleiding

Ferm Kluizen FLS-400 Kluis

Lees hieronder de 📖 handleiding in het Nederlandse voor Ferm FLS-400 Kluis (11 pagina's) in de categorie Kluizen. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
Ferm BV
P.O. Box 134
8280 AC Genemuiden-NL
Web: www.ferm.com 0307-17
Ferm FLS-400
Safe
Tresor
Kluis
Coffre-fort
Pengeskabet
USER’S MANUAL
GEBRAUCHSANWEISUNG
GEBRUIKSAANWIJZING
MODE D’EMPLOI
BRUGER VEJLEDNING
Art.nr. 380400
6. VEDLIGEHOLDELSE
Ved vedligeholdelse og reng ring af pen-
geskabet skal batterierne altid fjernes.
Brug aldrig vand eller andre væsker tilat
rengøre pengeskabets elektriske dele med.
Brug aldrigletantændelige væsker til
rengøring af pengeskabet.
UDSKIFTNING AF BATTERIERNE
- Der bruges fire 1,5 volts batterier (type D, LR20)
tilpengeskabets forsyningsspænding.
- Når den røde lampe begynder at blinke, skal batte-
rierne udskiftes. Herefter skal der indprogramme-
res en ny kode.
- De kan afprøve batterierne ved at trykke tast
“B”. Hvisden røde lampe begynder at blinke i det
samme, skal batterierne udskiftes. Hvis der ikke
sker noget, efter at De har
trykket “B”, er batterierne i orden.
- Hvis batteriernes ladetilstand er utilstrækkelig,
skal batterierne udskiftes inden for en måneds tid.
- Når den r de lampe lyser og begynder at blinke,
skal batterierne udskiftes inden for en måneds tid.
- Åbn pengeskabet ved hjælp af koden eller den spe-
cielle nøgle.
- I dørens venstre inderside er der en lille forskyde-
ligeklap. Bag ved klappen er de fire batterier place-
ret i en plasticbeholder.
- Udskift de fire 1,5 volts batterier (type D) med
nye.
- Anbring klappen igen i den oprindelige position.
- Nulstil nu koden ved at trykke den røde knap
dørens inderside.
- Programmér nu koden som beskrevet i kapitel 5.
- Pengeskabet er nu igen klar til brug.
GENNEM REGELMÆSSIG VEDLIGEHOL-
DELSE AF PENGESKABET UNDGÅS UN
DVENDIGE PROBLEMER!
7. FEJL
Hvis pengeskabet ikke virker som det skal, kan neden-
nævnte mulige årsager og tilhørende råd til afhjælpning
være praktiske.
1. Pengeskabet kan ikke åbnes.
Der er indtastet en forkert kode.
- Se kapitel 5 for at åbne pengeskabet.
2. Pengeskabet kan ikke programmeres.
Kontrollér batterierne:
- Udskift batterierne, om nødvendigt.
Den røde lampe blinker:
- Udskift batterierne.
ClEl
KONFORMITETSERKLÆRING (DK)
Vi erklærer at under almindeligt ansvar, at dette
produkt er i overenstemmelse med følgende
normer eller normative dokumenter
EN50081-1, EN-50082-1, EN55022
EN61000-4-2, 61000-4-3
i henhold til bestemmelserne i direktiverne:
89/336/EEC
92/31/EEC
93/68/EEC
frà 23-02-2000
GENEMUIDEN NL
W. Kamphof
Quality department
!
Ferm 11
Product: Ferm Electronic Safe
Type FLS-400, art.nr. 380400
Security devices Electr. code, emergency key
Ferm, Genemuiden, The Netherlands
CAREFULLY READ THE INSTRUCTIONS
BEFORE YOU USE THE SAFE!
1. INTRODUCTION
The safe is suitable for putting away valuables from
theft. It has no fire proof construction and is therefore
not fire safe! In case of fire the safe can be opened by
the emergency key. Consult, if necessary, your supplier.
2. SAFETY RULES
1. Don’t place the safe in a humid room.
2. Use the safe for its intended purpose only.
3. ENVIRONMENTAL PROTECTION
Recycling raw materials is prefered to dumping them
as waste. To prevent the machine from being damaged
during transport its packing must be strong. Insofar as
possible the packing consists of recyclable materials.
Because recycling is better for the environment, we
suggest you use as much as possible the recycling
methods.
Your safe contains batteries. Never
waste the batteries when they are
empty, but hand them in as "Small
Chemical Waste".
4. INSTALLATION
INSTALLING THE SAFE
The safe can be placed anywhere.
However, if use wish to make use of the optimal safety
features, the safe can be placed on a shelf or in a cup-
board.
Mark 4 holes on the base. Then drill 4 holes in the base
and place the bolts in the holes. You can then place the
safe on them and tighten the nuts inside the safe.
Do not immure the safe! In case of break in
transmission Ferm B.V. cannot be hold
responsible for the costs made for detaching
the safe.
5. USING THE SAFE
First, open the door of your safe, without turning rota-
ry knob before you start to program your safe. Remo-
ve the adhesive tape from the doorlock, place the bat-
teries into battery holder and proceed directly with
the programming of your code into the memory.
HOW TO PROGRAMM THE SAFE
- Press the mode reset button situated on the inside
of the door, causing the yellow indicator to illumi-
nate. You will hear two short beeps, indicating the
pre-set code has been erased.
- You can now enter a new code of 12 digits maxi-
mum, followed by the letter “B”,
OPENING THE SAFE
- You can open the safe by entering the code after
which the green indicator will illuminate.
You have 5 seconds to open the safe. When you
have entered the wrong code three times in suc-
cession, you will be unable to open the safe for 20
seconds. Should you once afain enter the wrong
code, you will have to wait 5 minutes before trying
to unlock the safe. After entering another wrong
code you will be unable to unlock the safe for at
least one hour.
LOCKING THE SAFE
Closing the door and turning the selector knob anti-
clockwise will lock the safe.
EMERGENCY KEYS
- These keys allow you to open the safe at all times,
even when the batteries are run down or when
you have forgotten the code.
- The key hole is situated behind the cover plate or
sticker between the button and the coding key-
!
UK English
W X D X H W X D X H Type D MN 1300
(mm) (mm) LR20
FLS-400 380400 350x360x380 344x300x374 4 x 1,5V 25,5
2 Ferm
ART.NR
TYPE
mm x mm x mm
mm x mm x mm
kg.


Product specificaties

Merk: Ferm
Categorie: Kluizen
Model: FLS-400 Kluis

Heb je hulp nodig?

Als je hulp nodig hebt met Ferm FLS-400 Kluis stel dan hieronder een vraag en andere gebruikers zullen je antwoorden