Ferm FAG-125N Handleiding

Ferm Slijpmachine FAG-125N

Lees hieronder de 📖 handleiding in het Nederlandse voor Ferm FAG-125N (22 pagina's) in de categorie Slijpmachine. Deze handleiding was nuttig voor 67 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/22
www.ferm.com 0702-28.1
UK Subject to change
D Änderungen vorbehalten
NL Wijzigingen voorbehouden
F Sous réserve de modifications
E Reservado el derecho de modificaciones
técnicas
P Reservado o direito a modificações
I Con reserva di modifiche
S Ändringar förbehålles
SF Pidätämme oikeuden muutoksiin
N Rett till endringer forbeholdes
DK Ret til ændringer forbeholdes
www.ferm.com
GB
D
NL
F
E
P
I
S
FIN
N
DK
USERS MANUAL 03
GEBRAUCHSANWEISUNG 06
GEBRUIKSAANWIJZING 10
MODE D’EMPLOI 13
MANUAL DE INSTRUCCIONES 17
ISTRUÇÕN A USAR 20
MANUALE UTILIZZATI 24
BRUKSANVISNING 27
KÄYTTÖOHJE 31
BRUKSANVISNING 34
BRUGERVEJLEDNING 38
Art.nr. AGM1002
FAG-125N
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
Fig.7
30 - 40o
8
7
2
6
2Ferm Ferm 43
EXPLODED VIEW
42 Ferm
ANGLE GRINDER
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
Read this operators guide carefully, before using
the machine. Ensure that you know how the
machine works, and how it should be operated. Maintain the
machine in accordance with the instructions, and make
certain that the machine functions correctly. Keep this
operator’s guide and other enclosed documentation with the
machine.
CONTENTS:
1. Machine data
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. MACHINE DATA
INTRODUCTION
This machine is developed for grinding and roughing of
metal and stone. With help of the correct accessories
the machine can also be used for brushing and sanding.
PACKAGE CONTENTS
1 Angle grinder
1 Side handle
1 Spanner
1 Instruction manual
1 Safety instructions
1 Warranty card
TECHNICAL SPECIFICATION
FEATURES
Fig.1
1. ON/OFF-switch
2. Guard
3. Side handle
4. Grinding disc
5. Spindle lock
2. SAFETY INSTRUCTIONS
EXPLANATION OF SYMBOLS
In this manual and/or on the machine the following
symbols are used:
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don’t
need any earthed plug.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains
electricity in the case that the cord gets
damaged and during maintenance
Keep bystanders away
Risk of fire
Wear ear and eye protection
Wear protective gloves
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the
appropriate recycling locations.
SAFETY INSTRUCTIONS
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions. Keep these
instructions in a safe place!
• Check that the maximum speed indicated on the
grinding disc corresponds to the maximum speed of
the machine. The speed of the machine must not
exceed the value on the grinding disc.
• Make sure that the dimensions of the grinding disc
correspond to the specifications of the machine.
• Make sure that the grinding disc has been mounted
and fastened properly. Do not use reducing rings or
adapters to make the grinding disc fit properly.
• Treat and store grinding discs in conformance with
the supplier’s instructions.
Voltage | 230 V~
Frequency | 50 Hz
Power input | 880 W
No-load speed | 11000/min
Disc diameter | 125 mm
Spindle dimension | M 14
Weight | 2,5 kg
Lpa (sound pressure) | 89 db(A)
Lwa (sound power) | 102 db(A)
Vibration value | 1.16 m/s2
Ferm 3
SPARE PARTS LIST FAG-125N
POSITION DESCRIPTION FERM NR
6 PINION GEAR 406068
11 ARMATURE 406069
18 SIDE HANDLE 406274
23 SPINDLE GEAR 406070
31 PROTECTING COVER 406071
33 FLANGE INSIDE 406846
35 FLANGE OUTSIDE 406847
37 STATOR 406072
38 SLIDE SWITCH KNOB 406073
40 SWITCH DRAW BAR 406074
43 CARBON BRUSH HOLDER 406075
44 CARBON BRUSH 406076
45 CARBON BRUSH CAP 406077
50 SWITCH 406078
58 WRENCH 406814


Product specificaties

Merk: Ferm
Categorie: Slijpmachine
Model: FAG-125N

Heb je hulp nodig?

Als je hulp nodig hebt met Ferm FAG-125N stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Slijpmachine Ferm

Handleiding Slijpmachine

Nieuwste handleidingen voor Slijpmachine