Ferm BGM1020 Handleiding

Ferm Slijpen BGM1020

Lees hieronder de 📖 handleiding in het Nederlandse voor Ferm BGM1020 (44 pagina's) in de categorie Slijpen. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/44

BENCH GRINDER

250W - 150MM

BGM1020

WWW.FERM.COM

Original instructions 03

Übersetzung der Originalbetriebsanleitung 07

Vertaling van de oorspronkelijke gebruiksaanwijzing

Traduction de la notice originale 15

Traducción del manual original 19

Překlad püvodního návodu k používání 24

Preklad pôvodného návodu na použitie 28

Tłumaczenie instrukcji oryginalnej 32

Eredeti használati utasítás fordítása 36

Fig. A

Fig. B

Fig. C Fig. D

BENCH GRINDER

Thank you for buying this Ferm product.

By doing so you now have an excellent product,

delivered by one of Europe’s leading suppliers.

All products delivered to you by Ferm are

manufactured according to the highest standards

of performance and safety. As part of our

philosophy we also provide an excellent customer

service, backed by our comprehensive warranty.

We hope you will enjoy using this product for

many years to come.

The numbers in the following text refer to the

pictures on page 2

Read the operating instructions carefully

before using this device. Familiarise

yourself with its functions and basic

operation. Service the device as per the

instructions to ensure that it always func-

tions properly. The operating instructions

and the accompanying documentation

must be kept in the vicinity of the device.

Contents

1. Machine data

2. Safety instructions

3. Installation

4. Operation

5. Maintenance

1. Machine data

Technical specifications

Voltage 230 V

Frequency 50 Hz

Power input 250 W

Rotational speed, not loaded 2950/min

Duty time S2 = 30 min

Grinding wheel dimensions

Ø 150x20 mm

Ø 150x40 mm

Spindle hole diameter

Ø 12.7 mm

Weight 8.5 kg

Lpa (Sound pressure level) 62.6+3 dB(A)

Lwa (acoustic power) 75.6+3 db(A)

Load factor

A load factor of S2 = 30 min (intermittent

periodic duty) means that you may operate the

motor continuously at its nominal power level

for no longer than the time stipulated on the

specifications label (30 minutes ON period). If

you fail to observe this time limit the motor will

overheat. During the OFF period the motor will

cool again to its starting temperature.

Vibration level

The vibration emission level stated in this instruction

manual has been measured in accordance with

a standardised test given in EN 61029; it may be

used to compare one tool with another and as a

preliminary assessment of exposure to vibration

when using the tool for the applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories,

may significantly increase the exposure level

- the times when the tool is switched off or when

it is running but not actually doing the job, may

significantly reduce the exposure level

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping your

hands warm, and organizing your work patterns

Contents of the package

1 Bench grinder

2 Sets eye shield bracket + eye shield

1 Tool rest (right)

1 Tool rest (left)

1 Instruction manual

1 Safety instructions

1 Guarantee card

Check the machine, loose parts and accessories

for transport damage.

Features

Fig. A

1. On/off switch

2. Tool rest (right)

3. Eye shield

4. Eye shield bracket

5. Screw

6. Tool rest (left)

2. safety instructions

Explanation of symbols

Denotes risk of personal injury, loss of

life or damage to the tool in case of non-

observance of the instructions in this

manual.

Product specificaties

Merk:	Ferm
Categorie:	Slijpen
Model:	BGM1020
Kleur van het product:	Zwart
Motor vermogen:	250 W
Stationair toerental (max):	2950 RPM
Aantal schijven:	2 schijven
Aantal slijpstenen:	2
Diameter slijpschijf:	150 mm
Dikte slijpsteen:	20 mm
Slijpsteen asgat:	12.7 mm