Ferm BCM1007 Handleiding
Ferm
Accuboosters
BCM1007
Lees hieronder de đź“– handleiding in het Nederlandse voor Ferm BCM1007 (16 pagina's) in de categorie Accuboosters. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/16
8039/1
USER’S MANUAL
GEBRAUCHSANWEISUNG
GEBRUIKSAANWIJZING
MODE D’EMPLOI
For/FĂĽr/Voor/Pour:
Art.nr. 161140
Art.nr. 161150
Art.nr. 161160
Art.nr. 161170
Art.nr. 161180
Art.nr. 161190
Art.nr. 161200
Ferm
Start 210, Start 320, Start
420, Start 520, Start 620,
Start 650, Start 1100
Movable rapid loaders
Mobile Schnellladegeräte
Mobiele Snelladers
Chargeurs de batterie rapides
Ferm Guarantee card. 31
12 MONTHS GUARANTEE CERTIFICATE
12 MONATE GARANTIESCHEIN
12 MAANDEN GARANTIEKAART
12 MOIS CERTIFICAT DE GARANTIE
Stamp dealer:
Stempel Händler:
Stempel handelaar:
Timbre marchand:
SERVOTOOL
POSTBUS 105
8280 AC GENEMUIDEN
HOLLAND
Nr. Article/Artikel Nr./Artikelnr./
N° d’Article:
Article/Artikel/Artikel/
Article:
Date of purchase/Kaufdatum/
Koopdatum/Date d’achet:
Owner/EigentĂĽmer/
Eigenaar/Propriétaire:
Address/Adresse/Adres/
Adresse:
Place/Ort/Plaats/
Ville:
Country/Land/
Land/Pays:
Signature/Unterschrift/
Handtekening:
Only in case of guarantee claim, send this card to:
Diese Karte nur bei Garantie Anspruch senden zu:
Alleen ingeval van een garantieclaim deze kaart opsturen naar:
Soulement en cas réagir de garantie envoyez ce carte par:
2Ferm
* For technical information we refer to page 25.
* Siehe Seite 25 fĂĽr technische Daten.
* Voor technische informatie verwijzen wij naar pagina 25.
* Pour des données techniques nous nous référons à page 25.
EC-EXPLANATION OF AGREEMENT
EG-ERĂ–RTERUNG VON ĂśBEREINSTIMMUNG
EG-VERKLARING VAN OVEREENSTEMMING
CERTIFICAT DE CONFORMITE-CE
Undersigned,/ Unterzeichnete,/ Ondergetekende,/ Soussigné,
POSTBUS 134
8280 AC GENEMUIDEN
NEDERLAND
- Declares that with this the, / Erklärt daß hiermit die, / Verklaart hiermee dat de, / Déclare que,
FERM START 210, ART.NR. 161140
FERM START 320, ART.NR. 161150
FERM START 420, ART.NR. 161160
FERM START 520, ART.NR. 161170
FERM START 620, ART.NR. 161180
FERM START 650, ART.NR. 161190
FERM START 1100, ART.NR. 161200
- are in conformity with the regulations of the next EC-guide-lines; / die Bestimmungen der folgenden
EG-Richtlinien entsprechen; / voldoen aan de bepalingen van de volgende EG-richtlijnen; /sont confor-
mes aux dispositions des directives-CE suivantes:
EMC GUIDE-LINES 89/336/EEG
92/31/EEG
LOW VOLTAGE GUIDE-LINES 73/23/EEG
93/68/EEG
- are in conformity with the following standards: / die folgenden Normen entsprechen: / voldoen aan de
volgende normen: / sont conformes aux normes suivantes:
EN 60335-1
EN 60335-2-29
EN 55014
EN 60555-2
Done at/Geschehen in/Gedaan te/Dressé à on/am/op/le
GENEMUIDEN, THE NETHERLANDS 28-11-1995
G.M. Ensing
Quality Department
30 Ferm CE-Explanation
1. PURCHASE
Product: Ferm Movable rapid loaders
Type Start 210, article number 161140
Type Start 320, article number 161150
Type Start 420, article number 161160
Type Start 520, article number 161170
Type Start 620, article number 161180
Type Start 650, article number 161190
Type Start 1100, article number 161200
Ferm B.V., Genemuiden, The Netherlands
Dear Client,
Thank you for buying this Ferm movable rapid loader.
By buying an excellent and reasonably priced appara-
tus you have made the right decision. The right appara-
tus for the right job is what Ferm stands for. We find it
extremely important that you can always rely on our
products.
Your new Ferm movable rapid loader has been care-
fully designed and manufactured by experts. Should
this unit show any fault, despite our strict final control,
please consult your local Ferm dealer. They will also
be pleased to inform you about the total range of Ferm
products.
We trust you will get a great deal of use out of your
Ferm movable rapid loader and will be pleased to sup-
ply you with our other products.
Management Ferm B.V.
CAREFULLY READ THE INSTRUCTIONS
BEFORE YOU USE THE MOVABLE RAPID
LOADER!
2. USE
The appliance can be used for three different purpo-
ses:
- Accumulator loading;
- Rapid loading at controlled time;
- Starting.
3. KNOW YOUR APPARATUS
Before you use the apparatus, carefully read the
instructions, especially the safety rules. Observe the
instructions for maintenance to ensure your apparatus
always operates properly. Before attempting to ope-
rate the apparatus, familiarise yourself with the con-
trols and make sure you know how to stop it quickly in
case of an emergency. Save this user’s manual and the
other documents supplied with this apparatus for futu-
re reference.
4. GENERAL SAFETY RULES
Keep the work area clean.
- A cluttered work area may cause accidents.
- Make sure the work area is well lit.
Work environment.
Never leave the rapid loader in the rain. Do not
use the rapid loader in damp or wet places. Never
use the rapid loader near inflammable liquids or
gasses.
Prevent electrical shock.
Keep the power cord away from heat, oil and
sharp edges. Avoid skin contact with exposed
parts of the power cord or plug. Damaged parts
must be replaced immediately.
Keep children away.
Never allow children or spectators to touch the
apparatus, keep them at a safe distance from the
work area.
Store the rapid loader in a safe place.
Rapid loaders that are not used must be stored in a
dry and locked placed, out of the reach of children.
Do not force the tool.
The machine will do the job better and safer at the
rate for which it was intended. Damage caused by
forcing the tool is not covered by the warranty.
Use the right type of apparatus.
Do not use low powered machines for heavy duty
operations. Never use the machine other than for
its intended purpose.
Cable.
Never carry the apparatus by its cable and do not
tug at the cable to pull the plug from the socket.
Keep the cable away from heat, oil and sharp
edges.
Maintain the tool with care.
The tool works best and safest if it is kept clean.
Disconnect the machine.
Disconnect the machine when you do not use it or
during maintenance.
Extension cable for outdoor use.
When working outdoors use only extension
cables suitable for this purpose and marked as
such. When using machines with earth connection,
use an extension cable with earth connection.
Stay alert.
Watch what you are doing, use your common sen-
se, do not operate the apparatus when you cannot
concentrate on the job.
Check the machine for damage.
- Before starting the machine, check that all safety
devices and damaged parts operate smoothly and
efficiently;
- If not stated otherwise in this manual, damaged saf-
Ferm Movable rapid loaders 3
Product specificaties
| Merk: | Ferm |
| Categorie: | Accuboosters |
| Model: | BCM1007 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ferm BCM1007 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Accuboosters Ferm
4 Oktober 2022
Handleiding Accuboosters
- Accuboosters Denver
- Accuboosters Ultimate Speed
- Accuboosters Black And Decker
- Accuboosters Kraftwerk
Nieuwste handleidingen voor Accuboosters
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022