Ferm AGM1004 - FAG-230 Handleiding
Ferm
Haakse slijper
AGM1004 - FAG-230
Lees hieronder de đź“– handleiding in het Nederlandse voor Ferm AGM1004 - FAG-230 (18 pagina's) in de categorie Haakse slijper. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/18
Ferm b.v. • P.O. Box 134 • 8280 AC Genemuiden NL • Web: www.ferm.nl 0105/28.1
Art.nr. 319590
FAG-230
USERS MANUAL
Angle grinder 02
GEBRAUCHSANWEISUNG
Winkelschleifer 06
GEBRUIKSAANWIJZING
Haakse slijper 10
MODE D’EMPLOI
Meuleuse d’angle 14
BRUKSANVISNING
Vinkelslipmaskin 18
KĂ„YTTĂ–OHJE
Kulmahiomakone 22
BRUKSANVISNING
Vinkelsliper 26
BRUGER VEJLEDNING
Vinkelslibere 30
GB
D
NL
F
SV
SU
N
DK
UK Subject to change
D Ă„nderungen vorbehalten
NL Wijzigingen voorbehouden
F Sous réserve de modifications
SV Ändringar förbehålles
SU Pidätämme oikeuden muutoksiin
NO Rett till endringer forbeholdes
DK Ret til ændringer forbeholdes
2Ferm
Angle grinder
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Risk of fire.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
SAFETY INSTRUCTIONS
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and also
the enclosed safety instructions. Keep these instruc-
tions in a safe place!
- Check that the maximum speed indicated on the grin-
ding disc corresponds to the maximum speed of the
machine. The speed of the machine must not exceed
the value on the grinding disc.
- Make sure that the dimensions of the grinding disc cor-
respond to the specifications of the machine.
- Make sure that the grinding disc has been mounted
and fastened properly. Do not use reducing rings or
adapters to make the grinding disc fit properly.
- Treat and store grinding discs in conformance with the
supplier’s instructions.
- Do not use the machine for grinding workpieces with a
maximum thickness exceeding the maximum grinding
depth of the grinding disc.
- Do not use grinding discs for deburring.
- When grinding discs have to be mounted on the thread
of the spindle, make sure that the spindle has sufficient
thread. Make sure that the spindle is sufficiently pro-
tected and does not touch the grinding surface.
- Before use, inspect the grinding disc for any damage.
Do not use grinding discs which are crack-ed, ripped or
otherwise damaged.
- Before use, let the machine run idle for 30 seconds.
Immediately switch off the machine in case of abnor-
mal vibrations or occurrence of another defect. Care-
fully inspect the machine and grinding disc before swit-
ching the machine on again.
- Make sure that sparks do not put people into danger or
that they contact highly flammable substances.
- Make sure that the workpiece is sufficiently supported
or clamped. Keep your hands away from the surface to
be cut.
- Always wear safety goggles and hearing protection. If
desired or required also use another kind of protection
like for example an apron or helmet.
- Ensure that mounted wheels and points are fitted in
accordance with the manufacturer’s instructions.
- Ensure that blotters are used when they are provided
with the bonded abrasive product and when they are
required.
- If a guard is supplied with the tool never use the tool wit-
hout such a guard.
- For tools intended to be fitted with threaded hole
wheel, ensure that the thread in the wheel is long
enough to accept the spindle length.
- Ensure that ventilation openings are kept clear when
working in dusty conditions. If it should become nes-
sesary to clear dust, first disconnect the tool from the
mains supply (use non metallic objects) and avoid
damaging internal parts.
- Though poor conditions of the electrical mains, shortly
voltage drops can appear when starting the equip-
ment. This can influence other equipment (eq. blinking
of a lamp). If the mains-impedance Zmax <0.348 Ohm,
such disturbances are not expected. (In case of need,
you may contact your local supply authority for further
information.
GB English
Ferm 35
EXPLODED VIEW
Ferm 3
TECHNICAL SPECIFICATIONS
Voltage 230 V~
Frequency 50 Hz
Power input 1650 W
No-load speed 6000/min
Disc diameter 230 mm
Spindle dimension M14
Weight 3.75 kg
Lpa(sound pressure) 94.6 dB(A)
Lwa(acoustic power) 107.6 dB(A)
Vibration value 0.8 m/s2
Electrical safety
Always check that the power supply corre-
sponds to the voltage on the rating plate.
Your machine is double insulated in accordance
with EN 50144; therefore no earthwire is requi-
red.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor size
is 1.5 mm2. When using a cable reel always unwind the reel
completely.
PACKAGE CONTENTS
The package contains:
1 angle grinder
1 side handle
1 spanner
Set carbon brushes
instruction manual
safety instructions
guarantee card
Check the machine, loose parts and accessories for trans-
port damage.
PRODUCT INFORMATION
Fig. A:
1. on/off switch
2. screw-on lid carbon brush (both sides)
3. spindle lock
4. grinding disc
5. side handle
6. lock-off button
4
5
3 2 1 6
34 Ferm
SPARE PARTS LIST
REF.NR. DESCRIPTION FERM NR.
4 FLANGE OUTSIDE 406847
6 FLANGE INSIDE 406846
16 SPINDLE GEAR FAG-230 406754
23 PINION GEAR FAG-230 406756
26 WOODRUFF KEY 406752
32 ROTOR 406757
39 BRUSH CAP 406758
41 CARBON BRUSH 406759
42 CARBON BRUSH HOLDER 406760
45 SWITCH 406761
47 CAM WRENCH 406762
Product specificaties
| Merk: | Ferm |
| Categorie: | Haakse slijper |
| Model: | AGM1004 - FAG-230 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ferm AGM1004 - FAG-230 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Haakse slijper Ferm
28 September 2022
28 September 2022
28 September 2022
28 September 2022
29 September 2022
28 September 2022
28 September 2022
28 September 2022
28 September 2022
29 September 2022
Handleiding Haakse slijper
- Haakse slijper Bosch
- Haakse slijper DeWalt
- Haakse slijper Batavia
- Haakse slijper Black Decker
- Haakse slijper Bruder Mannesmann
- Haakse slijper Flex
- Haakse slijper Fuxtec
- Haakse slijper Gamma
- Haakse slijper Lux Tools
- Haakse slijper Max
- Haakse slijper Parkside
- Haakse slijper Scheppach
- Haakse slijper Skil
- Haakse slijper Stanley
- Haakse slijper Toledo
- Haakse slijper Topcraft
- Haakse slijper Trotec
Nieuwste handleidingen voor Haakse slijper
13 Oktober 2023
13 Oktober 2023
2 Augustus 2023
30 Mei 2023
20 December 2022
13 Maart 2023
28 Februari 2023
30 Maart 2023
8 Juli 2023
8 Juli 2023