Fenton SPB-10 Handleiding

Fenton Speaker SPB-10

Lees hieronder de 📖 handleiding in het Nederlandse voor Fenton SPB-10 (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 91 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

SPB ACTIVE SPEAKER SERIES

178.438 178.444 - SPB-8 8” - -26 2x 6.5” SPB

178.440 178.446 - - 10” SPB 10 - - 2x 8” SPB 28

178.442 178.448 - - 12” SPB 12 - -2 2x 10” SPB 10

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

V1.1

SPECIFICATION

Frequency Response: ...................................................... 40Hz-20kHz ± 3dB

Input Sound Source: ...................................................................... Line Input

Speaker: ................................. 8 inch Woofer & 2x Piezo Tweeter (178.438)

10 inch Woofer & 2x Piezo Tweeter (178.440) ..............................................

12 inch Woofer & 3x Piezo Tweeter (178.442) ...............................................

2x 6.5 inch Woofer & 2x Piezo Tweeter (178.444) ........................................

2x 8 inch Woofer & 2x Piezo Tweeter (178.446) ...........................................

2x 10 inch Woofer & 2x Piezo Tweeter (178.448) .........................................

Car reader memory medium: ................................................... USB, SD Card

Power supply: ....................................................................... 230VAC / 50Hz

ENGLISH

Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to

benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the rst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or dimmer.

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a -16A fuse. 10

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the xture on and o. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- This unit is with speaker inside which can cause

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- his unit have a built-in lead-acid rechargeable battery. If t

Please recharge the battery every 3 months if you are

not going to use the unit for a long period of time. Or the

battery may be damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the unit has fallen, always have it checked by a

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations

and warnings. This is also applicable to all damages in whatever form.

Product specificaties

Merk:	Fenton
Categorie:	Speaker
Model:	SPB-10
Kleur van het product:	Zwart
Gewicht:	13400 g
Breedte:	320 mm
Diepte:	245 mm
Hoogte:	560 mm
Soort:	Vrijstaand PA-geluidssysteem
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Connectiviteitstechnologie:	Bedraad
Type stroombron:	AC
Microfoon, line-in ingang:	Ja
Gemiddeld vermogen:	300 W
Aantal luidsprekers:	2
Volumeregeling:	Draaiknop
Ingang stroom:	Ja
Equalizer-instellingen:	Ja
Impedantie:	8 Ohm
Aantal drivers:	3
Woofer:	Ja
Frequentiebereik:	40 - 20000 Hz
Gevoeligheid:	123 dB
Karaoke:	Ja
Luidspreker soort:	2-weg
Versterker:	Ingebouwd
Diameter woofer:	10 "
Aantal woofer drivers:	1
Aantal tweeter drivers:	2
Regeling van bass-niveau:	Ja
Tweeter:	Ja
AC-ingangsspanning:	220-240 V
AC-ingangsfrequentie:	50 Hz
Treble adjustment:	Ja