Fenton BoomBox400 Handleiding

Fenton Speaker BoomBox400

Lees hieronder de 📖 handleiding in het Nederlandse voor Fenton BoomBox400 (16 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 83 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

BoomBox400

Ref. nr.: 8.317 71

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRU IONS CT

INSTRUKCJA OBSŁUGI

V1.2

ENGLISH

Congratulations to the purchase of this Fenton produc Please read this manual thoroughly prior to using the unit in order to t.

benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or ctrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock. ele

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the rst time,

some smell may occur. is is normal and will disappear Th

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfuncti on.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

ne to be replaced by a qualied technician. ed

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or dimmer.

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the xture on and o. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the control s.

- is unit is with speaker inside which can cause Th

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- If this product have a built-in lead-acid rechargeable

battery. Please recharge the battery every 3 months if

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the u has fallen, always have it checked by a nit

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the uni t.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude cause a shock hazard. to

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the it. This would also invalid un

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations

and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been

received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from

shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be

returned, it is important that the product is returned in the original factory box and packaging.

If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.

CONTROLS AND CONN TIONS EC

1. 9VDC POWER INPUT

Connector for inserting the supplied power adapter.

Speaker can be used while charging.

2. USB RT PO

Connect your USB devices to this slot to play music

with MP3 or WMA format.

3. SD CARD SLOT

Insert an SD card in this slot to be able to play SD

card MP3 music les.

4. AUX INPUT

3.5mm auxiliary l input jack.ine

5. MICROPHONE INPUT

6.3 jack input for connecting a microphonmm e.

6. MODE

Press this button to switch between USB/SD-, AUX-,

FM and BT modes.

7. REC

Press to record the signal from the microphone input

(when USB is inserted).

8. PLAY/PAUSE LINK /

Press button to start/resume or pause playback. Press and hold for 3 seconds to initiate the ster pair (link) function.eo

9. MENU

Press to change bass/treble/ec . ho

10. PREVIOUS

Press to change to previous track/channel.

11. VOLUME CONTROL

Turn to adjust the volume output level.

12. NEXT

Press to change to next track/channel.

13. POWER SWITCH

Press to turn the device /o. on

14. LED

Press and hold to turn the party lighting on/o, press to change lighting eect.

15. MICROPHONE PRIORITY

Press to switch microphone priority function on/o. When set to on, microphone input will have priority, meaning the music

volume level will be turned down when a microphone input signal is detected.

16. REPEAT

Press to toggle repeat modes.

BT CONNECTI ON

1. Activate the on your dBT evice (Mobile phone, tablet etc.) which you want to play the music.

See the operating instructions for that device.

2. Press the “MODE” button and activate the -function. BT

3. 400 BoomBoxSelect “ ” on your device and pair BT .

Attention: distance is approx. 10meter w hout any barrier.BT it

STEREO PAIRING / LINK

The and feature a stereo pairing function. This means you ca purchase 2 a /or BoomBox400 BoomBox440 n BoomBox 400 nd

BoomBox440 speakers and connect them to play in stereo wirelessly. set up a BT connection with speaker 1. Step 1: Step 2:

set speaker 2 to BT mode. hold the button on speaker 1 and 2 for 3 seconds When pairing is Step 3: PLAY/PAUSE LINK/ .

successful, you ll hear a chime to conrm. ’

Product specificaties

Merk:	Fenton
Categorie:	Speaker
Model:	BoomBox400
Soort bediening:	Knoppen
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	4050 g
Breedte:	250 mm
Hoogte:	245 mm
AC-adapterfrequentie:	50-60 Hz
AC-adapter ingangsspanning:	100-240 V
USB-poort:	Ja
Type stroombron:	AC
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MicroSD (TransFlash)
Ingebouwde luidsprekers:	Ja
Volumeregeling:	Knoppen
Bedoeld voor:	Draagbaar
Ingebouwde camera:	Nee
Lengte:	500 mm
Aantal:	1
Frequentiebereik:	35 - 20000
Gevoeligheid:	70 dB
AC-adapter, uitgangsspanning:	9 V
Afstandsbediening inbegrepen:	Ja
Microfoonaansluiting:	Bedraad
Display met achtergrondverlichting:	Ja
Karaoke modes:	Enkel
Radio tuner geïntegreerd:	Nee
Aantal microfoons inclusief:	1
Ingebouwde discolamp:	Ja
Ondersteund aantal microfoons (max):	1