Fenton SPA1200 Handleiding

Fenton Speaker SPA1200

Lees hieronder de 📖 handleiding in het Nederlandse voor Fenton SPA1200 (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

SPA-Series Active Speaker set

Item: 170.143; 170.146; 170.149

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

V1.3

FRONT PANEL

1. ualizer 5-Bands Left Channel Eq

2. LED VU-meter

3. Equalizer 5-Bands Right Channel

4. Microphone 1 and 2, Jack 6.3mm (¼”)

5. Microphone delay control

6. Microphone echo control

7. Microphone volume control

8. Master volume control

9. USB

10. /MMC SD

11. Input selector

12. MP3 Play/Pause

13. MP3 next track / Volume +

14. MP3 previous track / Volume-

BACKPANEL

15. Line input

16. Speaker output

17. AC Power cable

18. Power switch

WARNING:

After long time using the back panel will be hot, do not touch it

by hand.

OPERATION:

Connect the passive speaker with the delivered speaker cable to the speaker output connector ( ). 16

WARNING: connect the supplied passive speaker on the speaker output terminal only!

If required connect an external signal source like a CD-layer to LINE IN. Connect the device with an electric outlet

(230VAC / 50Hz)

LINE INPUT (DVD, CD-player etc.):

1. Connect the source (DVD-player, CD-player etc.) to the line input ( ) on the rear panel. 15

2. Select by pressing input selector switch (2) LINE mode.

USB/SD:

1. Insert an USB (9) or SD device (10).

2. Push the input selector (4) to USB / SD mode .

3. Press PLAY button, MP3 begin to play.

MICROPHONE:

1. Insert the microphone to the MIC1 or MIC2 jack (4).

2. Adjust the MIC volume (7).

3. Adjust the echo (6) and delay (5) control.

1. Press input button (11) until the LED indicator will ashing fast.

2. Make connection between your BT-device and speaker.

3. When LED indicator flash slowly the connection is paired. BT

Volume control can be adjusted with the master VOLUME (8). Make sure that when you turn on the active

speaker's volume control is minimal. Adjust the Equalizer (1+3) to get the right sound.

TROUBLE SHOOTING

Failure

Possible cause

NO POWER

The power line is cut o or not connected

No power on the electric outlet

NO SOUND

Wrong input, check input selection

The volume knob at lowest

ONE SPEAKER WITHOUT SOUND

Connection between master & slave unit wrong

Signal line was broke

MICROPHONE NO SOUND

The microphone not complete connected

Adjust the microphone volume

Change microphone

MICROPHONE HOWL

The microphone is too close to the speaker

Master volume is set to high

Product specificaties

Merk:	Fenton
Categorie:	Speaker
Model:	SPA1200
Kleur van het product:	Zwart
Gewicht:	22000 g
Breedte:	385 mm
Diepte:	300 mm
Hoogte:	670 mm
Soort:	Vrijstaand PA-geluidssysteem
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Connectiviteitstechnologie:	Bedraad
Type stroombron:	AC
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	SD
Microfoon, line-in ingang:	Ja
Gemiddeld vermogen:	600 W
Aantal luidsprekers:	2
Volumeregeling:	Draaiknop
Aantal USB-aansluitingen:	1
Equalizer-instellingen:	Ja
Aantal drivers:	2
Woofer:	Ja
Frequentiebereik:	30 - 20000 Hz
Gevoeligheid:	128 dB
Aantal banden equalizer:	5
Handvat(en):	Ja
MP3 afspelen:	Ja
Karaoke:	Ja
Luidspreker soort:	2-weg
Versterker:	Ingebouwd
Diameter woofer:	12 "
Aantal woofer drivers:	1
Aantal tweeter drivers:	1
XLR in:	Ja
Regeling van bass-niveau:	Ja
Tweeter:	Ja
AC-ingangsspanning:	220/240 V
AC-ingangsfrequentie:	50 Hz
Treble adjustment:	Ja
Ondersteunde sample rates:	32 kHz