Fenton FT208LED Handleiding

Fenton Cradle/docking station FT208LED

Lees hieronder de 📖 handleiding in het Nederlandse voor Fenton FT208LED (20 pagina's) in de categorie Cradle/docking station. Deze handleiding was nuttig voor 59 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

FT208LED Portable System 82x ’’

Ref. nr.: 170.020

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.1

ENGLISH

Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to

benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the rst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or aged mains lead can cause electrical shock dam

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or dimmer.

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the xture on and o. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- force the controls. Do not

- This unit is with speaker inside which can cause

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- If this product have a built-in lead-acid rechargeable

battery. Please recharge the battery every 3 months if

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the unit has fallen, always have it checked by a

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interferenc e.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the uni t.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid y warranty. Do not make any changes to the unit. This would also invalid our

your warranty. The warranty is not applicable in case of accidents or damages caused by inapp iate use or disrespect of the warnings ropr

contained in this manual. Fenton cannot be held responsible for personal injuries cauy a disrespect of the safety recomm ions and endat

warnings. This is also applicable all damages in whatever form. to

UNPA ING INSTRUCTION CK

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are

present, and have been received in good condition. Notify the shipper immediately and retain packing material f inspection if or

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that the product must be returned to the factory, it is important that the product be retur in the original ned

factory box and packing.

If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched until it has reached room temperature. off

CONTROLS AND CONNECTIONS

1. LCD Display

2. BUTTON SELECTION

3. TF CARD

Insert a TF card here.

4. USB PORT

Connect your USB drive to this slot to play music with

MP3-format in USB mod e.

5. AUX INPUT

3.5mm auxiliary line input jack.

6. MICROPHONE VOLUME

Turn to adjust the microphone volume level.

7. MASTER VOLUME

Adjust the overall output level.

8. TREBLE KNOB

Turn to adjust the higher tones.

9. BASS KNOB

Turn to adjust the lower tones.

10. MIC VOL

Turn to adjust the intensity of your microphone volume.

11. ECHO CONTROL

Turn to adjust the intensity of the echo eect.

12. LIGHT SWITCH

13. POWER SWITCH

14. EXTERNAL POWER SUPPLY

15. 5VDC POWER INPUT

Connector for inserting the supplied power cord.

REMO TE

1. STAND- BY

Use this button to put the unit into or out of standby mode.

2. MODE

Press to switch between BT/USB/SD modes.

3. NUM PAD

Numeric keyboard for selecting presets.

4. EQUALIZER

Press to use EQ function.

5. MUTE

Press to mute the device.

6. U SB/TF

Select the usb o tf card. r

7. PREVIOUS

Press to change to the previous track.

8. PLAY/PAUSE

Press this button to start or pause play.

9. NEXT

Press to change to the next track.

10. VOLUME + CONTROL

Adjust the output level higher the sound system. on

11. VOLUME - CONTROL

Adjust the output level low on the sound system. er

12. MASTER VOLUME CONTROL

Product specificaties

Merk:	Fenton
Categorie:	Cradle/docking station
Model:	FT208LED
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	8600 g
Breedte:	500 mm
Diepte:	300 mm
Hoogte:	445 mm
Capaciteit van de accu/batterij:	1800 mAh
AC-adapterfrequentie:	50/60 Hz
AC-adapter ingangsspanning:	100-240 V
Bluetooth:	Ja
Aan/uitschakelaar:	Ja
Ondersteund audioformaat:	MP3
USB-connectortype:	USB Type-A
Connectiviteitstechnologie:	Bedraad en draadloos
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MicroSD (TransFlash)
Accu/Batterij voltage:	3.7 V
Aantal USB 2.0-poorten:	1
Microfoon, line-in ingang:	Ja
Gemiddeld vermogen:	500 W
Aantal luidsprekers:	1
Aansluiting voor netstroomadapter:	Ja
USB-aansluiting:	Ja
Aantal drivers:	2
Woofer:	Ja
Frequentiebereik:	50 - 18000 Hz
AC-adapter, uitgangsspanning:	9 V
Soort magneet:	Ferriet
AUX ingang:	Ja
Inclusief microfoon:	Ja
Diameter woofer:	8 "
Afstandsbediening inbegrepen:	Ja
Regeling van bass-niveau:	Ja
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Type batterij:	Ingebouwde accu