FeiYu-Tech AK4500 Handleiding
FeiYu-Tech
Statief
AK4500
Lees hieronder de š handleiding in het Nederlandse voor FeiYu-Tech AK4500 (1 pagina's) in de categorie Statief. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/1
Control camera to take
photo, need to connect
to camera
Switch among multiple
working modes
AK4500 Overview
Battery Installation
Remove the tail cap, open the batteries compartment, and install the batteries
correctly.
1
Please fully charge the
batteries before powering on
the gimbal for the ļ¬rst time.
2 Handle Installation
Speciļ¬cations
Adapter Camera Some of the camera like Canon, SONY, Panasonic and etc.
Payload 4600g ( In center of gravity balanced state )
Weight About g 1656 ( Not including the batteries )
Operation Time Hours12
Panning Speed 3Ā°/s ~ 150Ā°/s
Tilting Speed 2Ā°/s ~ 75Ā°/s
Max. Tilting Range 230Ā°
Max. Rolling Range 360Ā°
Max. Panning Range 360Ā°
( Please download the detailed manual for the speciļ¬c compatible camera
and lens )
Secondary
quick release
plate
Capturing
button
1/4 inch
thread hole
1/4 inch
thread hole
Tilt axis
Tilt axis
positioning
lock
Function
button
Power button
Sliding arm
lock screw
Screw Anti- column of
quick release plate
Quick release plate
safety lock
Cross arm
lock screw
Roll axis
Vertical arm
Pan axis
Pan axis
positioning lock
Multifunction
knob
Handle
Vertical arm
lock screw
Roll axis positioning lock
Lens supporting
frame
Anti-drop
column
* Scan QR codes to download detailed manual for more
usage of the gimbal.
* This product does not include the camera.
Can mount a variety of accessories,
can be disassembled and installed
as required
Control camera to shoot
video, need to connect
to camera
Recording button
The four positioning screws must be aligned with the corresponding positioning holes
and then tighten the ļ¬xing ring
Align the handle positioning screw with the corresponding positioning holes under the
pan axis machine and then tighten the ļ¬xing ring.
A.Stylus
B.Positioning hole
C.Positioning screw
Secondary
quick release
plate safety
lock
Cross
arm
Shortcut
button
Joystick
Quick
release
plate
(1) Before balancing the gimbal, the lens cover should be removed from the camera and the memory
card needs to be inserted to the camera to complete all the connections to ensure that the camera is
ready for shooting.
(2) During balancing the gimbal, make sure the camera is powered oļ¬ and the gimbal is turned oļ¬.
(3) If add accessories after the balancing is completed, need to re-balance.
Fixed plate
EN V 1.0
3-Axis Stabilized Handheld Gimbal for Camera
Quick Start Guide
Touch screen
Mode button
Sliding arm
User Guide
(1) Please install the camera before powering on the gimbal.
Read the detailed manual before using it.
(2) When the battery is low, please charge the gimbal.
(3) When not in use, turn oļ¬ the gimbal and then remove the batteries.
(4) Follow the steps to quickly experience the basic features of the AK4500.
TIPS
Scan QR codes to download and install
Feiyu ON App.
Prohibit any user for any illegal purpose. Users will be responsible for all behaviors of purchase and use products.
The Company assumes no liability for any risks related to or resulting from the debug and use of this product (including the direct,
indirect or third-party losses).
For any unknown sources of using, we will not be at any services.
The updating and changes of product ļ¬rmware and program may cause changes in function descriptions in this user manual,
please read the instructions carefully before upgrading the ļ¬rmware and use the corresponding user manual.
You can get the latest user manual from the oļ¬cial website: www.feiyu-tech.com
FeiyuTech reserves the right to amend this manual and the terms and conditions of use the gimbal at any time.
D I S C L A I M E R
Guilin Feiyu Technology Incorporated Company
For more information, please visit our oļ¬cial website
E-mail: service@feiyu-tech.com Tel: +86ļ¼0ļ¼773 2320865
www.feiyu-tech.com
Due to software and hardware improvements, your actual product might diļ¬er from the descriptions
and pictures in this user manual. You can get the latest user manual from the oļ¬cial website.
Screw
Support
frame
Detailed Manual
For More Downloads Operation Tutorial
For More
!
2
1
3
18650 Li-ion Battery x4
!
!
3Positioning Lock
Balanced Lock Stored Lock
Each of the three rotating
axis has one positioning
lock for convenient
positioning and storage
purposes. Be sure to
unlock them before using
the gimbal.
Tight
Loose
TIPS
5Gimbal Balancing
5.1 Balance Adjustment of the Tilting Axis
4 Camera Installation Make sure the battery and memory card are
loaded before installation.
(1) Install the quick release plate to the
ļ¬xed plate and take out the secondary
quick release plate.
Secondary quick release plate
Insert the secondary
quick release plate
!
(2) Fix the secondary quick release plate to
the bottom of the camera.
1
2
3
(2)
1
6
7
8
Power on / oļ¬
Download the Feiyu ON App
iOS Version Android Version
* Requires iOS 9.0 or later, Android 6.0 or later.
Connecting App
(1) Turn on the mobile phone Bluetooth and start the gimbal.
(2) Open the App, and connect to AK4500 according to the App prompts. After
the connection is successful, you can control AK4500 on the App.
Power
Button
Before powering on the gimbal, need to unlock
all the axis positioning lock.
!
Alignment
Alignment
A B C
(3) Insert the secondary quick release
plate tiltly and press down. The secondary
quick release plate safety lock automatically
locks and locks the secondary quick
release plate safety lock.
1
2
4
3
2
1
3
4
Panning Mode
All follow mode
Lock Mode
Follow mode
Bluetooth
Camera mode
Battery level
Multifunction knob
control
Long press the power button, release it when the display show
a. Place the camera lens vertically upwards, determine the camera's center of gravity.
b. Unlock the quick release plate safety lock , balance the camera position .
c. Tighten the quick release plate safety lock and tilt the camera up or down, if it
stays stable, it means balanced.
1
1
5.2 Balance Adjustment of the Rolling Axis
a. Tighten the tilt axis positioning lock , release the roll axis positioning lock , and
observe the camera tilt state.
b. Loosen the cross arm lock screw , slide the cross arm to balance the camera position.
c. Tighten the cross arm lock screw and tilt the camera to the left or right, if it stays
stable, it means balanced.
12
4
3
3
5.3 Balance Adjustment of the Panning Axis
a. Tighten the pan axis positioning lock , loosen the pan axis positioning lock , keep
the handle part of the gimbal parallel to the ground and the vertical arm parallel to the
ground, and observe the camera rotation after the releasing.
b. Loosen the vertical arm lock screw , slide the vertical arm to balance the camera position.
c. Tighten the vertical arm lock screw to rotate the pan axis to any angle, if it stays stable, it
means balanced.
12
4
3
3
a. Unlock the tilt axis positioning lock , place the camera lens vertically upwards,
determine the camera's center of gravity.
b. Loosen the sliding arm lock screw , slide the sliding arm to balance the
camera position.
c. Tighten the sliding arm lock screw , if the camera lens can stay vertically
upwards that means balanced.
(1)
1
2
2
3
Before balancing the gimbal, lock the gimbal to the
balance lock state at ļ¬rst, unlock each axis positioning
lock in stages during the balancing process.
!
(4) Install the lens support frame to ensure
that the lens holder can hold the lens ļ¬rmly.
!
Please follow the direction
of the icon on the back
of the secondary quick release
plate to install.
(For standard version)
The AK4500 is divided into a standard version and a basic version. The standard version comes
standard with support frame, AK series brushless follow focus, and hyperlink remote controller.
You can choose the most suitable one for your needs.
Product specificaties
Merk: | FeiYu-Tech |
Categorie: | Statief |
Model: | AK4500 |
Kleur van het product: | Zwart |
Gewicht: | 1656 g |
Breedte: | 429 mm |
Diepte: | 240 mm |
Hoogte: | 175.3 mm |
Soort: | Handheld camera stabilizer |
Gebruikershandleiding: | Ja |
Oplaadtijd: | 5 uur |
Bluetooth: | Ja |
Maximale gewichtscapaciteit: | 4.6 kg |
Operationele tijd: | 12 uur |
Certificering: | CE |
Soft grip: | Ja |
Materiaal: | Aluminium |
Inklapbaar: | Ja |
Draaihoek: | 360 Ā° |
Pan bereik: | 0 - 360 Ā° |
Montage: | 1/4" |
Draaien: | Ja |
Bereik kantelhoek: | 0 - 230 Ā° |
Type batterij: | 18650 |
Toepasbaarheid: | Universeel |
Heb je hulp nodig?
Als je hulp nodig hebt met FeiYu-Tech AK4500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Statief FeiYu-Tech
16 Januari 2024
16 Januari 2024
16 Januari 2024
16 Januari 2024
16 Januari 2024
16 Januari 2024
16 Januari 2024
16 Januari 2024
Handleiding Statief
- Statief Braun
- Statief Sony
- Statief Nikon
- Statief Asus
- Statief Alpine
- Statief Aukey
- Statief Bresser
- Statief DJI
- Statief Dorr
- Statief Drift
- Statief Easypix
- Statief Godox
- Statief GoPro
- Statief Hama
- Statief Kodak
- Statief Kogan
- Statief Konig
- Statief Laserliner
- Statief Livoo
- Statief Neewer
- Statief Pyle
- Statief Ravelli
- Statief Revo
- Statief Rollei
- Statief Silvercrest
- Statief Sunpak
- Statief Trust
- Statief Vanguard
- Statief Velbon
- Statief Velleman
- Statief Vortex
- Statief Winegard
- Statief Omnitronic
- Statief Barska
- Statief Miller
- Statief Celestron
- Statief Levenhuk
- Statief Kessler
- Statief Eurolite
- Statief ARRI
- Statief JOBY
- Statief Vello
- Statief Swarovski
- Statief Testo
- Statief Carson
- Statief Benro
- Statief Magnus
- Statief Manfrotto
- Statief Sachtler
- Statief Sevenoak
- Statief Zhiyun
- Statief AVerMedia
- Statief MOZA
- Statief Cullmann
- Statief Stalco
- Statief GVM
- Statief Marshall Electronics
- Statief Rode
- Statief Slik
- Statief Celly
- Statief Gitzo
- Statief Proaim
- Statief Konig & Meyer
- Statief Ultimate Support
- Statief Oben
- Statief Glide Gear
- Statief Camgear
- Statief Libec
- Statief Redrock Micro
- Statief Auray
- Statief Ulanzi
- Statief Flycam
- Statief Gravity
- Statief Sirui
- Statief Vinten
- Statief Acratech
- Statief ProMediaGear
- Statief Fidlock
- Statief Mantona
- Statief Olloclip
- Statief IFootage
- Statief SmallRig
- Statief FeiyuTech
- Statief Sky-Watcher
- Statief Hohem
- Statief MOVE'N SEE
- Statief On Air
- Statief Kaiser Fototechnik
- Statief Slidekamera
- Statief IOptron
- Statief FLOWCINE
- Statief SteadiCam
- Statief Fat Gecko
- Statief 3 Legged Thing
- Statief FLM
- Statief Peak Design
- Statief Easyrig
- Statief Robus
- Statief Studio Assets
- Statief Square Jellyfish
- Statief Tiltall
- Statief E-Image
- Statief MotoCrane
- Statief Cam Caddie
- Statief Cartoni
- Statief HPRC
- Statief Really Right Stuff
- Statief Ruggard
- Statief Ready Rig
- Statief Axler
Nieuwste handleidingen voor Statief
20 December 2024
20 December 2024
20 December 2024
20 December 2024
19 December 2024
19 December 2024
19 December 2024
19 December 2024
19 December 2024
19 December 2024