Fantini Cosmi CH180K3 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Fantini Cosmi CH180K3 (4 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
CH180K3
WIRELESS TEMPERATURE CONTROL KIT
3 TEMPERATURE AREAS
INSTRUCTIONS FOR USE
FANTINI COSMI S.p.A.
Via dell’Osio, 6 20090 Caleppio di Settala, Milan – ITALY
Tel. +39 02 956821 | Fax +39 02 95307006 | info@fantinicosmi.it
www.fantinicosmi.it
2
3 TEMPERATURE AREA WIRELESS TEMPERATURE CONTROL KIT
CH180K3
Thank you for purchasing a FANTINI COSMI S.p.A. product
Please read this instruction manual carefully and always keep it handy should you need to consult it for any
reason.
The documentation reflects the characteristics of the product. However, for regulatory or commercial
developments, customers should verify the availability of updates relating to this documentation on the
FANTINI COSMI S.p.A. website: pdf.fantinicosmi.it
OPERATION
The pre-configured CH180RFWIFI programmable thermostat acts as a supervisor for the Intellicomfort+
wireless multi-zone system by controlling the 2 areas of the home, interacting with the wireless actuators
for the O60RF radiator.
The components, which are already preconfigured, are divided as follows:
area 1 = 1 CH180RFWIFI + 1 O60RF;
area 2 = 1 O60RF;
area 3 = 1 O60RF;
The CH180RFWIFI “MASTER” programmable thermostat directly controls the O60RF radiator actuators,
each in a different area. The latter receive the current set point from the programmable thermostat and
regulate the temperature in two different ways:
the O60RF actuator associated with the CH18RFWIFI (area 1), performs the adjustment based on the
temperature detected by the programmable thermostat;
the O60RF actuator associated with a zone without thermostat (area 2 and 3), regulates the temperature
according to the current one detected by its internal sensor.
CONTENTS OF PACKAGE
no. 1 wireless weekly programmable thermostat with WiFi connection, code CH180RFWIFI
no. 3 wireless radiator actuators, code O60RF
no. 1 user instruction sheet
Area 1
Area
Area
O60RF
(PR1)
O60RF
(PR1)
O60RF
(PR1)
CH180RFWIFI
3
3 TEMPERATURE AREA WIRELESS TEMPERATURE CONTROL KIT
CH180K3
Install the O60RF actuators, on the radiators, as indicated in the instruction sheet without batteries,
contained in their packaging.
Be sure to position each O60RF in the correct area (as indicated in the label on the product).
EXAMPLE
Insert batteries into the actuators
If you want to control the CH180RFWIFI remotely via APP from smartphone or tablet, download
the .INTELLICLIMA+ App
To install the APP, refer to the CH180RFWIFI instruction sheet, downloadable from
FANTINI COSMI S.p.A. : pdf.fantinicosmi.it
Power the programmable thermostat and set the [ MAN ] manual program mode
Actuator to be installed in area 2
START-UP
ATTENTION!
Installation must be done by qualified personnel in compliance with the requirements
concerning installation of electrical equipment. Installation operations must be performed
with the system’s power disconnected.
Z : _
2
Install the programmable thermostat in area 1
1
2
3
4
5
The app is available for free on:Intelliclima+
The CH180RFWIFI programmable thermostat must be installed on the wall or on a flush mounting box,
in 3 units or round, at a height of about 1.5m from the floor, in a suitable position to detect the room
temperature correctly.
For installation, refer to the contained in the programmable thermostat package QUICK GUIDE
CH180RFWIFI.


Product specificaties

Merk: Fantini Cosmi
Categorie: Thermostaat
Model: CH180K3

Heb je hulp nodig?

Als je hulp nodig hebt met Fantini Cosmi CH180K3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Thermostaat Fantini Cosmi

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat