Fantini Cosmi CH130ARR2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Fantini Cosmi CH130ARR2 (24 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
KIT CH130ARR2
INSTRUCTIONS FOR USE
FANTINI COSMI S.p.A.
Via dell’Osio, 6 20090 Caleppio di Settala, Milan – ITALY
Tel. +39 02 956821 | Fax +39 02 95307006 | info@fantinicosmi.it
www.fantinicosmi.it
ROOM THERMOSTAT
AND ACTUATOR
FOR FAN COIL CONTROL
2
FAN COIL ROOM THERMOSTAT
CH130ARR2
Thank you for purchasing a FANTINI COSMI S.p.A. product
Please read this instruction manual carefully and always keep it at hand should you need to consult it for any reason.
The documentation reflects the characteristics of the product. However, for regulatory or commercial developments,
customers should verify the availability of updates relating to this documentation on the FANTINI COSMI S.p.A.
website: pdf.fantinicosmi.it
OPERATION
The unit is a kit consisting of a thermostat and an actuator that connected with a bipolar CH130ARR2 CH130AR2 CH176D
cable, allows the remote control of two valves, the three-speed motor, or a 0 ..10V motor, of a fan coil. The thermostat
reads the room temperature and controls it from the fan coil’s motor valves and speed in order to obtain the best climate
comfort. Fan adjustment can be automatic or manual, depending on the settings made by the user from the function
keys, which, together with the LCD screen facilitates daily operation of the system. The non-polarised bipolar cable
connecting the thermostat to the module has dual function:
â– thermostat power supply,
â– communication bus between thermostat and actuation module.
It is possible to connect a single thermostat to several actuators in order to control more fan coils simultaneously with
only two cables. For this application, follow the detailed instructions in the unit installation manual . CH176D
CONTENTS OF PACKAGE
â– 1 thermostat
â– 2 screws
â– 1 user manual
â– 1 actuator
1 2 3 4 5 8 9
7
6
3
FAN COIL ROOM THERMOSTAT
CH130ARR2
DESCRIPTION OF DISPLAY KEYS
CONTROLS
1 Increases the fan speed or sets automatic
ventilation
2 Reduces the ventilation speed or sets OFF
mode (thermostat off).
3 Increases the current temperature set point
4 Decreases the current temperature set
point
5 Thermostat reset without loss of settings
ADVANCED CONTROLS
Simultaneously pressing the two keys enables the following
settings:
1 and 2 Comfort/Economy mode change
3 and 4 Summer/Winter mode change (pressing >
3 sec)
WARNINGS KEY
1 Measured or set temperature
2 Comfort mode
3 Economy mode
4 Summer mode
5 Winter mode
6 Fan speed indicator (MIN-MED-MAX)
7 Automatic fan mode
8 Fan-coil cooling enabled
9 Fan-coil heating enabled
Note: in 4-pipe plants, when both symbols 4 and 5 light up it indicates AUTOMATIC mode.
With the active minimum sensor function, the symbol 8 or the flashing symbol 9 indicates that the supply water temperature
is outside the set limits. In this case, ventilation is interrupted.
1
2
3
4
5


Product specificaties

Merk: Fantini Cosmi
Categorie: Thermostaat
Model: CH130ARR2

Heb je hulp nodig?

Als je hulp nodig hebt met Fantini Cosmi CH130ARR2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Thermostaat Fantini Cosmi

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat