Faber Agtrim - Agio Handleiding

Faber Afzuigkap Agtrim - Agio

Lees hieronder de đź“– handleiding in het Nederlandse voor Faber Agtrim - Agio (1 pagina's) in de categorie Afzuigkap. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Three Screws
Rangehood Body
Front
Strip
CUSTOMIZING YOUR RANGEHOOD
The front strip of the rangehood can be customized by replac-
ing the factory supplied strip with a custom front strip made
from the same materials as your cabinets. The front strip is
attached to the rangehood by three recessed screws and
three key hole slots on the back side of the strip as indicated
in FIGURE 1. It is necessary only to remove the three lower
screws to remove the front strip. The top screws will slide out
of the key holes once the three lower screws are removed.
Side View of the Rangehood
The front strip dimensions are given in FIGURE 2. For a
custom front strip, a local cabinet shop can make a strip to
match your cabinets. If you wish to keep the frame of the front
panel and only replace the glass panel, the dimensions follow:
Height = 5 11/16", Depth = 1/8", Width = 29 11/16" (for 30"
model) 35 11/16" (for 36" model) 23 5/8" (for 24" model).
FIGURE 1
23 5/8" or 29 15/16" or 35 15/16"
Vue latérale de la hotte
FIGURE 2
PERSONNALISER LA HOTTE
La bande frontale de la hotte peut être personnalisée en
remplaçant la bande fournie par une bande de même
matière que l’armoire. La bande frontale est maintenue à
la hotte par trois vis creuses et trois fentes à l’arrière de la
bande comme il est indiqué à la FIGURE 1. Les vis du des-
sus glisseront hors des fentes lorsque les trois vis creuses
seront enlevées.
Les dimensions de la bande sont données à la FIGURE 16.
Pour une bande personnalisée, un marchand d’armoires
peut fabriquer une bande qui s’assortira aux armoires. Si
vous désirez retenir la charpente de la bande frontale, et
seulement replacer le verre, les dimensions sont Hauter =
5 11/16 po, Épaisseur = 1/8 po, Largeur = 29 11/16" (pour
modèle 30 po) 35 11/16 po (pour modèle 36 po) 23 5/8 po
(pour modèle 24 po).
Bande
frontale
Boîtier de la hotte
Trois vis
FIGURE 1
23 5/8" or 29 15/16" or 35 15/16"
FIGURE 2
Agio - Instructions for customizing the front face plate
Agio - Instructions pour personnaliser le plat de visage avant


Product specificaties

Merk: Faber
Categorie: Afzuigkap
Model: Agtrim - Agio

Heb je hulp nodig?

Als je hulp nodig hebt met Faber Agtrim - Agio stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Afzuigkap Faber

Handleiding Afzuigkap

Nieuwste handleidingen voor Afzuigkap

XO

XO VD136SG Handleiding

21 Februari 2025
XO

XO VD136SS Handleiding

21 Februari 2025
Airlux

Airlux AHR660BK Handleiding

21 Februari 2025
Amana

Amana UXL6036YSS Handleiding

20 Februari 2025
Roblin

Roblin Mistral Handleiding

20 Februari 2025
Roblin

Roblin Aqua 900 Handleiding

20 Februari 2025
XO

XO VW48SC Handleiding

20 Februari 2025
XO

XO VV236SC Handleiding

20 Februari 2025