Extech 42265 Handleiding
Extech
Omgevingsthermometer
42265
Lees hieronder de 📖 handleiding in het Nederlandse voor Extech 42265 (22 pagina's) in de categorie Omgevingsthermometer. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/22
SW276
User Guide
Model 42265 Temperature Datalogger Kit
Model 42275 Temperature and Humidity Datalogger Kit
Model SW276 Datalogging Software
V7.1 1/08
2
Introduction
Congratulations on your purchase of Extech Instrument’s Datalogging instrumentation and
software. This User Guide serves three purposes, refer to the list below:
1. This User Guide covers the following products entirely with regard to hardware and
software operation:
Model 42275: Temperature and Humidity Datalogging Module with docking station and SW276 Windows
TM
Software
Model 42265: Temperature Datalogging Module with docking station & SW276 Windows
TM Software
Model SW276: WindowsTM Datalogging Software
2. This User Guide covers the following products with regard to software and some
hardware operation. A separate manual is supplied with your instrument that covers all
of the hardware operation.
Model 42276: Temperature & Humidity Datalogging Module plus printing/docking station & Optional
SW276 WindowsTM Software
Model 42266: Temperature-only Datalogging Module plus printing/docking station & Optional SW276
WindowsTM Software
Model 42270: Temperature and Humidity Datalogging Module
Model 42260: Temperature-only Datalogging Module
3. This User Guide covers the following products with regard to software only; all other
information regarding hardware is covered in a separate, dedicated manual supplied
with the instrument.
Model 42280: Temperature and Humidity Datalogger (Software instructions only)
Applications
The Datalogging modules models 42270 and 42260 can be used to monitor the
temperature of greenhouses, warehouses, food transports, aircraft cabins, refrigerated
trucks, containers, museums, and HVAC equipment. The Model 42270 records Relative
Humidity readings in addition to temperature readings. Modules can store 16,000 (8000
temperature and 8000 %RH for 42270) readings that can later be transferred to PC or
directly printed using the Model 42276 Programmer/Printer.
Important note on the Model 42280 Temperature/Humidity Datalogger
Note that the Model 42280 has its own User Guide. Please refer to
the separate User Guide supplied with the Model 42280 for details
on the meter’s operation. This manual covers only the Datalogging
software with regard to the 42280. Install the supplied Software as
described on the program CD’s label and then skip to page 5 of this
manual for software instructions.
Model 42280
The datalogger module display will not switch
on until activated through the software
The datalogger module display will not switch on until it is activated by the
software in the LOGGER SET menu as described later in this manual. In
LOGGER SET the user selects the type of recording activation. When the
lo
gg
er be
g
ins to lo
g
data
,
the dis
p
la
y
and status LEDs will switch on.
V7.1 1/08
3
REC HI LOW COMM
RH%
°C
°F
Description
1. LCD display
2. Mounting hole
3. Docking station
4. Interface Cable
5. Status LEDs
6. Software CD
Displays
LCD Display
REC: Displayed while logging readings. Read the ‘Recording
Status’ section for further details.
HI and LOW: Displayed when the High or Low Alarm limit is
exceeded. See ‘Alarm Status’ below for further information.
RH%: Relative Humidity (42270 and 42275 only)
C or F: Temperature units.
COMM: Appears when Datalogger is communicating with a PC.
Recording Status Indication
Both the RED status LED and the display indicator ‘REC’ will flash every 5 seconds if the
sampling rate is set to 5 seconds or higher. If the sampling rate is set lower than 5
seconds, the indicators will flash every 1, 2, 3, or 4 seconds as programmed.
ALARM Status Indication
Both the YELLOW status LED and the display indicator ‘ALM’ will flash when the recorded
value is higher than the user programmed High Alarm value or lower than the Low Alarm
value. The Alarm status LED and the ‘ALM’ display indicator flash every 5 seconds if the
sampling rate is programmed for 5 seconds or higher. If the sampling rate is set lower than
5 seconds, the indicators will flash every 1, 2, 3, or 4 seconds as programmed.
Low Battery Indication
When the lithium battery’s voltage nears the critical operating level the LCD displays ‘LO’.
To replace the battery, refer to the Battery Replacement section of this manual.
Product specificaties
| Merk: | Extech |
| Categorie: | Omgevingsthermometer |
| Model: | 42265 |
Heb je hulp nodig?
Als je hulp nodig hebt met Extech 42265 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Omgevingsthermometer Extech
6 December 2023
9 Mei 2023
7 Mei 2023
4 Mei 2023
24 April 2023
23 April 2023
10 April 2023
29 Maart 2023
25 Maart 2023
24 Maart 2023
Handleiding Omgevingsthermometer
- Omgevingsthermometer Fluke
- Omgevingsthermometer Hama
- Omgevingsthermometer Laserliner
- Omgevingsthermometer Milwaukee
- Omgevingsthermometer Powerplus
- Omgevingsthermometer Pyle
- Omgevingsthermometer Reer
- Omgevingsthermometer Ryobi
- Omgevingsthermometer Sencor
- Omgevingsthermometer Taylor
- Omgevingsthermometer Techno Line
- Omgevingsthermometer Technoline
- Omgevingsthermometer TFA
- Omgevingsthermometer Uni-T
- Omgevingsthermometer Velleman
- Omgevingsthermometer Oregon Scientific
- Omgevingsthermometer EMOS
- Omgevingsthermometer AcuRite
- Omgevingsthermometer La Crosse Technology
- Omgevingsthermometer Alpin
- Omgevingsthermometer P3 International
Nieuwste handleidingen voor Omgevingsthermometer
18 November 2024
18 November 2024
18 November 2024
18 November 2024
4 Januari 2024
3 Januari 2024
19 December 2023
12 Augustus 2023
18 Juni 2023
10 Juni 2023