Extech 401025 Handleiding
Extech
Lichtmeter
401025
Lees hieronder de đź“– handleiding in het Nederlandse voor Extech 401025 (7 pagina's) in de categorie Lichtmeter. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/7
USER MANUAL
Model 401025
Digital Light Meter
Addional User Manual Translaons available at www.extech.com
401025- -GB_v2.9 5/18 en
2
Introduction
Congratulations on your purchase of the Extech Digital Light Meter. This device is shipped fully tested
and calibrated and, with proper use, will provide years of reliable service. Please visit our website
(www.extech.com) to check for the latest version of this User Guide, Product Updates, and Customer
Support.
Meter Description
1. LCD Display
2. Data Hold Switch
3. Power O/Range Switch
4. Analog Output Terminal
5. Battery Compartment (rear)
6. LUX/Fc Switch & Response Switch
7. Light Sensor
8. Zero adjust
401025- -GB_v2.9 5/18 en
3
Lux
Operation
1. Select Units (Lux or Ft-candle) and the Response Time (Fast/Slow) using the slide switch. Typical
selection is Slow and Fc using the gray lettering.
2. Select the maximum range using the Range Switch.
3. Hold the Light Sensor so that the sensor faces the light source to be measured.
4. The display will indicate measured values. Use a range display multiplier if on the Lux 20,000 and
50,000 ranges or on the Fc 5000 range (see notes below).
5. To hold (freeze) a measurement, slide the Data Hold Switch to the Hold ition. The reading will pos
freeze in the display until the Data Hold Switch is released.
Note 1: An Over Range indication is a display of "1__ ". If this occurs, switch to a higher range.
Note 2: For measurements made on the Fc 5000 range, the displayed reading must be multiplied by
10.
Note 3: For measurements made on the Lux 20000 or 50000 ranges the displayed reading must be
multiplied by 10 and 100 respectively.
Note 4: The meter will indicate values above the maximum ranges. The accuracy of these
measurements is unknown.
Range Display Multipliers
Range
Units
Multiplier
200
Fc
Direct reading
2000
Fc & Lux
Direct reading
5000
Fc
Reading x10
20,000
Lux
Reading x10
50,000
Lux
Reading x100
Example: If a measurement on the 5000 Fc range displays 350 the actual measured value is:
350 x 10 = 3500 Fc.
Product specificaties
| Merk: | Extech |
| Categorie: | Lichtmeter |
| Model: | 401025 |
Heb je hulp nodig?
Als je hulp nodig hebt met Extech 401025 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Lichtmeter Extech
9 Mei 2023
21 April 2023
29 Maart 2023
4 Maart 2023
12 Februari 2023
30 November 2022
11 Oktober 2022
Handleiding Lichtmeter
- Lichtmeter Amprobe
- Lichtmeter Beha-Amprobe
- Lichtmeter Fluke
- Lichtmeter Gossen
- Lichtmeter KlikaanKlikuit
- Lichtmeter PCE Instruments
- Lichtmeter Pyle
- Lichtmeter Quantum
- Lichtmeter Sekonic
- Lichtmeter Uni-T
- Lichtmeter Velleman
- Lichtmeter Voltcraft
- Lichtmeter Steren
- Lichtmeter Klein Tools
- Lichtmeter Testo
- Lichtmeter Testboy
- Lichtmeter Kyoritsu
- Lichtmeter Delta Ohm
Nieuwste handleidingen voor Lichtmeter
17 November 2024
14 November 2024
14 November 2024
14 November 2024
8 April 2024
6 Maart 2024
6 Maart 2024
6 Maart 2024
5 Januari 2024
4 Januari 2024