EXSYS EX-6011 Handleiding

EXSYS Niet gecategoriseerd EX-6011

Lees hieronder de 📖 handleiding in het Nederlandse voor EXSYS EX-6011 (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

Thank you for purchasing this 8-line Digital I/O to Ethernet Adapter

(hereinafter referred to as ). It is designed to adopt your “Adapter”

digital I/O lines remotely on your Ethernet (Internet). It delivers simple,

reliable and cost-effective network connectivity for your digital I/O

applications such as home or industrial factory automation, digital I/O

control from any networked PC, alarm and power monitoring by

network or Internet, PC controlled machines, distributed machine

I/O, remote lighting and power control etc.

Features:

 4 Digital Input and 4 Output Lines over a 10-pin Terminal Blocks

 2 Non-inverted and 2 Inverted Output Lines

 Provides ESD and Surge Protection for all I/O Lines

 I/O Line Voltage is Compatible with CMOS/TTL

 Provides one 10/100Mbps, RJ45 LAN Port

 Provides TCP Server, TCP Client, and I/O Extender Modes

 Powered +5VDC by DC Jack or Terminal Blocks

 Provides both Wall Mounting and DIN RAIL Kits

 Supports Virtual COM Port Drivers

DIO Lines Terminal

Blocks

EX-6011

8-line Digital I/O to Ethernet Adapter, w/ DIN

RAIL Mounting Kit

1. Introduction

2. Connector Layout

+5VDC Power

Input DC Jack

RJ45 LAN

Connector

Switch to Restore

Default Settings

8-line Digital I/O to Ethernet Adapter

 10-pin Terminal Blocks: This pluggable terminal blocks integrates 4

digital input and 4 digital output I/O lines (CMOS/TTL Level). Its pin

assignment as the following table. The +5V pin functions as either

INPUT or OUTPUT, if DC Jack is powered, it simply copies the +5V

from the DC jack and works as +5V OUTPUT. If the DC Jack is

unconnected, it can be powered by this pin with +5V input

power.

 Switch to Restore Default Settings: This switch can be used to reset

the product to its factory default settings. Press the switch by

either a pen or similar tool will restore the default settings

immediately.

Power Input DC

Jack Connector

10/100 Mbps LED

(amber color)

Link/Activity LED

(green color)

INPUT 3

INPUT 2

INPUT 1

INPUT 0

GROUND

+5V INPUT

OUTPUT 3# (INVERTED)

OUTPUT 2# (INVERTED)

OUTPUT 1

OUTPUT 0

+5V

DO_3#

DO_2#

DO_1

DO_0

DI_3

DI_2

DI_1

DI_0

GND

8-line Digital I/O to Ethernet Adapter

 DC Jack Power Connector: A 5V/2A AC adapter is supplied with

this product.

 RJ45 Ethernet Connector: 10/100Mbps Ethernet port. It supports

auto cross-over feature. You can use the same cable to connect

to either a Hub/Switch or a host computer.

 LED Indicators: There are 2 LAN LEDs on the rear panel. They are

described as the following table:

LED Name Color LED Function

Link/Activity

Green Steady on: Linked.

Blinking: Transferring data

10/100Mbps

Amber Steady on: Linked in 100Mbps mode.

Off: Linked in 10Mbps mode.

1. Use static electricity discharge precautions.

Remove possible static discharge potential from any objects that

the may come in contact with before installation. This Adapter

can be accomplished by touching a bare metal chassis rail after

you have turned off the power.

2. Attached the power adapter. +5V DC power needs to be

connected to either the DC jack or the Terminal Blocks, but not

simultaneously. Once the power is connected to the DC jack,

the +5V power will output to the 10-pin Terminal Blocks

immediately. So it is not allowed to connect any power to the

Terminal Blocks if the DC jack is connected to a 5V AC power

adapter.

3. Connecting LAN cable: Use a standard straight-through Ethernet

cable to connect to a Hub or Switch. If you connect the

Adapter to your computer’s Ethernet port instead, you don’t

need to change to a cross-over type cable since the Adapter

provides auto cross-over feature.

4. Connect the Adapter’s DI and DO pins to your devices.

5. Use the Wall or DIN RAIL mounting Kit (optional) if you want to

place the product on the industrial DIN RAIL.

3. Hardware Installation

Product specificaties

Merk:	EXSYS
Categorie:	Niet gecategoriseerd
Model:	EX-6011
Kleur van het product:	Zwart
Gewicht:	400 g
Breedte:	65 mm
Diepte:	42 mm
Hoogte:	20 mm
Gebruikershandleiding:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Certificering:	CE, FCC
Aansluiting voor netstroomadapter:	Ja
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-40 - 75 °C
Relatieve luchtvochtigheid:	5 - 95 procent
Ondersteunde netwerkprotocollen:	UDP, IP, TCP, ICMP, HTTP, DHCP, ARP-Ping
Meegeleverde drivers:	Ja
Aantal kanalen:	- kanalen
Afmetingen (B x D x H):	42 x 65 x 20 mm
Bedrijfstemperatuur (T-T):	0 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Output interface:	RJ-45
Signaal directie:	Invoer/uitvoer