EXSYS EX-6002POE Handleiding

EXSYS Wifi-repeater EX-6002POE

Lees hieronder de 📖 handleiding in het Nederlandse voor EXSYS EX-6002POE (4 pagina's) in de categorie Wifi-repeater. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Thank you for purchasing this 4-Port USB2.0 USB Server (hereinafter

referred to as ). It provides an ideal solution to use “The USB Server”

USB devices over Internet instantly. With its Client Software, the

network users can use the remote USB devices over a local network

or the Internet as if they were connected directly to your local PC.

With its PoE (Power over Ethernet, actives as a PD) feature, the USB

Server can be powered by Ethernet cable that was driven by the

standard PSE (Power Sourcing Equipment).

The USB Server supports High speed USB devices such as printers,

scanners, digital cameras and USB Flash drives over the network. It is

ideal for home office, small office or industrial applications that

access the USB devices remotely.

+7~24V DC

Power Input

Terminal Blocks

EX-6002PoE

4-Port USB2.0 to Ethernet Adapter (USB over IP, w/ PoE)

1. Introduction

2. Connector Layout

+7~24V DC Power

Input DC Jack

RJ45 LAN

Connector

4 USB2.0 Downstream

Type-A Connectors

USB Status

LED

Power LED

Switch to Reset to

Default Settings

USB Upstream

Port

4-Port USB2.0 to Ethernet Adapter (USB Server, w/ PoE)

Features:

 Provides 4 USB2.0 Downstream Host Ports over Ethernet (or IP)

 Supports Standard USB Hub Mode: the 4 USB Devices can be Accessed

by either Ethernet Port or the Upstream USB Connector

 Supports PoE (PD) Feature, no External AC Power Adapter is Required

 Allows Working With Remote USB Devices as with Local Ones

 Supports High Speed/Full Speed USB2.0 Peripherals

 Provides IEEE 802.3 10/100/1000Mbps, Auto Cross-over Ethernet Port

 DC Jack and Terminal Blocks for DC +7~24V DC Power Input

 Supports Windows XP, 2003, Vista and Win 7

 DC Jack and Terminal Blocks Power Connectors: If your Ethernet

cable supports power according to PoE standard, you don’t

have to connect any power to the DC Jack or Terminal Blocks.

However, a 7V~24V DC Power is required if your Ethernet does

NOT support PoE. In this case, power is supplied from either the

DC Jack or the Terminal Blocks, but not both at the same time.

 RJ45 Ethernet Connector: 10/100/1000Mbps Ethernet port. It

supports auto cross-over feature. You can use the same cable to

connect to either a Hub/Switch or a host computer. A PSE will

supply power to this connector.

 Type-B USB Upstream Port Connector: If connect it to the PC’s USB

host port, the USB server will be switched immediately to work as

a simple USB hub, however, the Ethernet port is not able to

access the USB devices any more. In this case, please make sure

the Ethernet is not accessing the USB devices (the USB devices

are in the free device state), otherwise, the USB devices may not

function properly.

 USB Link LED: It indicates the USB devices are linked to Ethernet

port and are been accessing.

 PWR LED: It lights when the DC power is on.

 LAN LED Indicators: There are 2 LEDs on the RJ45 connector, they

are described as the following table:

LED Name Color LED Function

Link

Green The Connection on the Steady on:

Ethernet port is built and Active

Off: Ethernet Port Disconnected

Act

Yellow Transferring Ethernet Data Blinking:

Off: No Data Transferring on Ethernet

4-Port USB2.0 to Ethernet Adapter (USB Server, w/ PoE)

1. Use static electricity discharge precautions.

Remove possible static discharge potential from any objects that the

Adapter may come in contact with before installation. This can be

accomplished by touching a bare metal chassis rail after you have

turned off the power.

2. Attached the DC power source: there are 2 connectors can be added

the power to the unit. One is the DC Jack (by the AC /DC Adapter) and

the other is the 2-pin terminal blocks.

3. Connecting LAN cable: Use a standard straight-through Ethernet cable

to connect to a Hub or Switch. If you connect the USB Server to your

computer’s Ethernet port instead, you don’t need to change to a

cross-over type cable since the Adapter provides auto cross-over

feature.

4. Connect the USB Server’s USB ports to your USB devices.

Typical Connection Diagram:

3. Hardware Installation

Client PC1 Client PC2 Client PC3

Router/Hub

USB Server

WAN/DSL

(to Internet)

USB Printer

USB

Camera USB DVD

Product specificaties

Merk:	EXSYS
Categorie:	Wifi-repeater
Model:	EX-6002POE
Kleur van het product:	Zwart
Gewicht:	600 g
Breedte:	120 mm
Diepte:	60 mm
Hoogte:	23 mm
Soort:	Netwerkzender
LED-indicatoren:	Ja
Aantal USB 2.0-poorten:	4
Aantal Ethernet LAN (RJ-45)-poorten:	1
Duurzaamheidscertificaten:	RoHS
Bekabelingstechnologie:	10/100/1000Base-T(X)
Netwerkstandaard:	IEEE 802.3ab, IEEE 802.3u
Ondersteunt Windows:	Windows 7 Home Premium, Windows Vista Home Premium, Windows XP Home
Temperatuur bij opslag:	-40 - 75 °C
Externe adapter:	Ja
Output current:	2 A
Spanning:	5 V
Power over Ethernet (PoE):	Ja
Afmetingen (B x D x H):	152 x 60 x 23 mm
Chipset:	Elite E3868M4
Maximaal bereik:	- m
Overdrachtssnelheid:	1000 Mbit/s
Bedrijfstemperatuur (T-T):	0 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent