Everdure Furnace Gen 2 Handleiding

Everdure Barbecue Furnace Gen 2

Lees hieronder de 📖 handleiding in het Nederlandse voor Everdure Furnace Gen 2 (13 pagina's) in de categorie Barbecue. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13
everdurebyheston.com
FO RCE T M
FURN ACET M
Assembly, operation &
maintenance instructions
for Everdure by Heston
Blumenthal FORCE™ &
FURNACE™ gas barbeques
and stands
Power by design.
T H E O U T DO O R
P E R F O R M A N C E
FO RC E T M
2 B U R N ER
G A S B A R B E Q U E
FU R NA C E T M
3 B U R N ER
G A S B A R B E Q U E
4Assembly, Operation & Maintenance Instructions
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT: Read the safety precautions of this booklet carefully before removing
the barbeque from its carton or connecting the barbeque to its gas supply. If you are
unsure about anything regarding your barbeque, please contact Everdure by Heston
Blumenthal in Australia on 1300 HESTON or in New Zealand on (09) 415 6000 before
operating your appliance.
1. This gas barbeque and stand set are intended for OUTDOOR USE ONLY. This
appliance must NOT be used indoors.
2. For your safety and enjoyment, read all operating instructions before lighting.
3. Ensure that all gas connections are tight before operating this appliance (refer to
leak testing procedure in this manual). Always check for leaks when a gas cylinder is
replaced or reconnected.
4. Unsupervised children or pets should not be near a barbeque while cooking or during
warm up or cool down. Ensure children or pets are kept a distance well away from the
barbeque whilst it is in use. Ensure that young children do not play with the appliance.
This appliance is not intended for use by young children or inrm persons.
5. Particular care must be taken when removing the fat tray and the disposable foil trays.
Mishandling of hot oil and fats can cause serious injury. Take care when changing plates
& grills that parts are not hot & oil or fat does not drop onto the burner. Take care that
the burner ports do not block up.
6. Turn gas valve/control knob and gas cylinder valve o after use. Do not allow build-up
of unburned gas.
7. Never leave the burners on high for more than 10 minutes unless actually cooking.
When cooking with the hood down, always follow the instructions in the Roasting
section of this manual.
8. Do not move this barbeque set while in use or directly after use, as accessible parts may
be very hot. The barbeque should only be lifted by the serveries at either side. Take
care that undue pressure will not be placed on the gas hose, or turn o the gas supply
& remove the hose from the cylinder or gas source (not at the barbeque). Take care
that the fat tray & disposable aluminium foil tray are removed to minimise fat/oil spillage.
When moving on the stand, leave the gas cylinder on the cylinder mounting hook for
stability.
9. This barbeque has been designed to be used either on the supplied trolley or on a
raised bench. When using a raised surface (table etc.), ensure the surface is level, large
enough and strong enough to support the barbeque and will withstand temperatures of
60°C above ambient temperature. When using the stand, ensure that your barbeque is
in a level position and the barbeque is secured onto the stand correctly (four screws at
the barbeque base).
10. People with ammable clothing such as nylon etc. should keep well away from the
barbeque when it is operating.
11. Do not use this appliance for any purpose other than what it is intended for.
12. In case of fat re turn cylinder o. The fat tray should be cleaned and checked before
using the barbeque. Disposable aluminium foil trays should be replaced before using
the barbeque. Regular cleaning should reduce the build-up of fat and food residues
which is combustible and can result in a fat re. Fat res can be prevented with
diligence in cleaning your fat tray and regular replacement of aluminium foil trays. Do
not allow the aluminium foil tray to overow. Damage as a result of fat re is not
covered by your warranty and voids it. Do not use sand, kitty litter or fat absorbents in
the fat tray or disposable aluminium foil tray.
13. Ensure that the product has adequate clearance from combustible materials. The
appliance is designed so that heat will not aect the stand. All combustible materials
must be kept more than 250mm from the sides and rear of the barbeque and more
than 1500mm above the cooking surface of the barbeque.
14. If a burner makes a hissing sound when lit, it may be burning inside. Turn the burner o,
allow to cool, and try ignition again. Keep your barbeque protected against strong wind
– if this cannot be avoided, always check that the burners remain alight if operating the
barbeque in windy conditions.
15. Do not carry out any servicing on the gas manifold of the barbeque yourself – this must
only be done by authorised technicians.
16. We recommend that you regularly maintain your barbeque and keep it in good condition.
This can be achieved by following the cleaning and maintenance suggestions in this
booklet.
17. The barbeque and stand are designed to be used with either 4kg or 9kg gas cylinders.
When not using the stand, the cylinder should be placed at a lower level to the


Product specificaties

Merk: Everdure
Categorie: Barbecue
Model: Furnace Gen 2

Heb je hulp nodig?

Als je hulp nodig hebt met Everdure Furnace Gen 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Barbecue Everdure

Handleiding Barbecue

Nieuwste handleidingen voor Barbecue