Erica Synths Pico Quant Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Erica Synths Pico Quant (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
FEATURESTECHNICAL SPECS
Thank you for purchasing Erica Synths Pico Series module!
With Pico Series we challenged ourselves – can we make ANY
superior functionality synth module 3HP wide and affordable?
Yes, we can.
Erica Pico QUANT QUANT is advanced CV quantizer with some
unique features – quarter tone accuracy and the web-based
interface for creating user generated scales.
See instructions, how to use scale generator software below!
8 preset scales
Web based interface for user generated and extra preset scales
Microtonal quarter tone scales
Adjustable tolerance
Adjustable CV glide between notes
Clocked and independent quantization
Minimum accuracy 1/4 tone
CV IN amplitude (negative voltages are ignored) -10V - +10V
CV OUT amplitude 0V - +8V
Glide time 0 – 1”
Power consumption +25mA, -6mA
Module width 3HP
Module depth 35mm
QUANT
PICO
PICO
QUANT
Use this knob to adjust quantizer
tolerance – a CV range around the
given note CV in which the module
advances to the next CV stage.
Full CCW setting gives 50% tolerance,
in other words, the quantizer will
advance to the next note
approximately in the mid way between
notes; full CW setting gives 10%
tolerance, meaning, the quantizer will
advance to the next note when
incoming CV is very close to the CV of
the given note. See the illustration
below. Tolerance control is
particularly useful when random CV
or noise is applied to the CV input.
Glide knob sets the glide time
between notes. For quick sequences it
will work like wet/dry
(CCW-quantized/CW-no-quantized)
control
For clocked quantization patch
the clock signal here
This is unquantized CV input
This is quantized CV output
Push this button promptly
to switch between 8 scales.
Push and hold a button for 2” and
module will advance to scale
upload mode.
LED will start blinking red.
The RGB LED indicates currently
selected scale. Refer to the table of
preset scales below!
CLK OUT LED will blink
on each CV change
This is output of quantizer trigger. If
nothing is patched in CLK IN, the output
trigger will appear on each CV step
change
PICO
QUANT
TOLERANCE
GLIDE
SCALE
CLK IN
CV IN
CV OUT
CLK OUT
TOLERANCE control in action
SCALE CV1 SCALE CV2
50%
TOLERANCE,
CCW
10%
TOLERANCE,
CW
CV OUT WITH 50%
TOLERANCE (CCW)
SCALE CV1 SCALE CV2
CV IN 50%
TOLERANCE,
CCW
10%
TOLERANCE,
CW
CV IN
CV OUT WITH 10%
TOLERANCE (CW)


Product specificaties

Merk: Erica Synths
Categorie: Niet gecategoriseerd
Model: Pico Quant

Heb je hulp nodig?

Als je hulp nodig hebt met Erica Synths Pico Quant stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Erica Synths

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd