Erica Synths Pico MScale Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Erica Synths Pico MScale (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
Thank you for purchasing Erica Synths Pico Series module!
With Pico Series we challenged ourselves – can we make ANY superior
functionality synth module 3HP wide and affordable? Yes, we can.
Erica Pico MSCALE (Moog Scale, to be specific) is precision scaler to adapt
Moog Mother 32 to eurorack standard 1V/oct control voltages. Those,
who own Moog Mother 32 know, that it requires -5V - +5V on 1V/oct input
to operate in full range, while the eurorack standard is 0V - +10V. So,
to control Moog Mother 32 from a eurorack sequencer you need to bias
a sequencer output for 5 volts down. And vice versa – Moog Mother 32
sequencer outputs -5V - +5V on 1V/oct output, and, if you wish to control
some eurorack VCO from Moog Mother 32, you need to bias it 5 volts up.
This is exactly what MSCALE does – it has two sections – upper one adds
5V to the input voltage, other subtracts 5V form the input voltage.
Of course, the module is not limited for use with Moog Mother 32 only.
You can use it as a regular eurorack precision voltage scaler.
FEATURESTECHNICAL SPECS
Precision scaler to adapt Moog Mother 32 1V/oct to
eurorack standard
Moog to eurorack section
Eurorack to Moog section
High precision, high temperature stability
Skiff friendly, compact design
Max frequency drift over 5 octaves +-4 CENTS
Power consumption +6mA, -6mA
Module width 3HP
Module depth 25mm
MSCALE
PICO
The upper section
of the module converts
the 1V/oct output of the
Moog Mother 32 sequencer
to the eurorack standard,
namelY, it adds 5V
to the output voltage.
Patch the output of the
Moog Mother 32 sequencer
(marked KB on the Moog
Mother) here!
This is the output
of the top section –
patch eurorack VCO
1V/oct input here
and you can control
the VCO from the
Moog Mother 32
sequencer
This is the output
of the bottom
section –
patch Moog Mother
32 VCO 1V/oct input
here and you can
control it from the
regular eurorack
setup.
The lower section
of the module converts the
1V/oct output of an eurorack
sequencer or CV keyboard
to control Moog Mother 32,
namely, it subtracts 5V from
the input voltage.
Patch the CV output of your
eurorack sequencer or CV
keyboards here!
PICO
MSCALE
Water is lethal for most of the electric devices, unless they are made
waterproof. This Erica Synths module is NOT intended for use in a humid or
wet environment. No liquids or other conducting substances must get
into the module. Should this happen, the module should be disconnected
from mains power immediately, dried, examined and cleaned by a
qualified technician.
Do not expose the module to temperatures above +50° C or below -20° C. If
you have transported module in extreme low temperatures, leave it in
room temperature for an hour before plugging it in.
Transport the instrument carefully, never let it drop or fall over.
Warranty does not apply to modules with visual damages.
The module has to be shipped in the original packaging only. Any module
shipped to us for return, exchange and/or warranty repair has to be in
its original packaging. All other deliveries will be rejected and
returned to you. Make sure you keep the original packaging and
technical documentation.
This device complies to the EU guidelines and is manufactured RoHS
conforming without use of led, mercury, cadmium and chrome.
Nevertheless, this device is special waste and disposal in household
waste is not recommended.
Safety Instructions
You will find Erica Synths terms of warranty at www.ericasynths.lv.
Items for return, exchange and/or warranty repair have to be sent to:
Erica Synths
Andrejostas Str. 12
Riga
Latvia
LV-1045
User manual by Girts Ozolins@Erica Synths
Design by EDMUNDS PAVLOVSKIS.
Copying, distribution or any commercial use in any way is prohibited and needs the written
permission by Erica Synths.
Specifications are subject to change without notice.
In case of any questions, feel free to contact us through www.ericasynths.lv or via e-mail
info@ericasynths.lv.
Please follow the instructions for use of the Erica Synths module
below, ‘cause only this will guarantee proper operation of the module
and ensure warranty from Erica Synths.


Product specificaties

Merk: Erica Synths
Categorie: Niet gecategoriseerd
Model: Pico MScale

Heb je hulp nodig?

Als je hulp nodig hebt met Erica Synths Pico MScale stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Erica Synths

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd