Erica Synths Black LPG Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Erica Synths Black LPG (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
OFFSET
VCA
BOTH
VCF
ON
OFF
BLACK LPG
RESONANCE
DECAY
CV LEVEL
OUTMODE CVCV ININPUT
DECAY CVTRIGGER
EG OUT
MODE
RESO
DRIVE
Transport the instrument carefully, never let it drop or fall
over. Warranty does not apply to modules with visual
damages.
The module has to be shipped in the original packaging
only. Any module shipped to us for return, exchange and/or
warranty repair has to be in its original packaging. All other
deliveries will be rejected and returned to you. Make sure
you keep the original packaging and technical documentation.
This device complies to the EU guidelines and is manufac-
tured RoHS conforming without use of lead, mercury,
cadmium and chrome. Nevertheless, this device is special
waste and disposal in household waste is not recommended.
User manual by Girts Ozolins@Erica Synths.
Design by Ineta Briede@Black8.
Copying, distribution or any commercial use in any way is
prohibited and needs the written permission by Erica
Synths.Specifications are subject to change without notice.In
case of any questions, feel free to contact us through
www.ericasynths.lv.
You will find Erica Synths terms of warranty at
www.ericasynths.lv
Items for return, exchange and/or warranty repair have to
be registered at SUPPORT on www.ericasynths.lv and send
back to us according to instructions in the support page.
BLACK
LOWPASS GATE
THANK YOU FOR CHOOSING
ERICA SYNTHS BLACK SERIES MODULE!
Erica Black Series include high-end, unique functionality and superior quality modules. Only
the best, highest quality components are used, all inputs and outputs are protected against
undesired overvoltage. Erica Black Series consist of range of modules that are needed to
put together entire synth. Enjoy!
Erica Synths Black LPG is our take on Lowpass Gate idea its designed from scratch
module featuring 2nd order lowpass VCF (the original Buchla lowpass gate was 1st order
VCF) and VCA combo with distinct resonance circuit on top. Voltage control over VCF cuto
frequency/VCA oset and mode (VCF/VCF+VCA/VCA), as well as built in decay envelope
generator makes it a versatile module for sound shaping in any modular setup.
SPECS:
Audio output amplitude 10Vptp
CV range (full span) -5V - +5V
Max Decay time 4’’
Panel width 10HP
Module depth 35mm
Power consumption 44mA@+12V, 45mA@-12V
FEATURES:
Three vactors for 2nd order VCF
VCF/VCF+VCA/VCA modes
Manual and voltage controlled cuto/oset
Manually and voltage controlled mode selection
Manually resonance depth control
Resonance overdrive switch
Built in decay envelope generator
Manually and voltage controlled decay time
Envelope CV output
Ski-friendly design
OFFSET
The OFFSET knob controls VCF cuto frequency and VCA oset, depending
on the mode selected
SAFETY INSTRUCTIONS
Please follow the instructions for use of the Erica Synths module below,
‘cause only this will guarantee proper operation of the module and
ensure warranty from Erica Synths.
Water is lethal for most of the electric devices, unless they are made
waterproof. This Erica Synths module is NOT intended for use in a
humid or wet environment. No liquids or other conducting
substances must get into the module. Should this happen, the
module should be disconnected from mains power immediately,
dried, examined and cleaned by a qualified technician.
Do not expose the module to temperatures above +5 C or below
-20° C. If you have transported module in extreme low temperatures,
leave it in room temperature for an hour before plugging it in.
RESO DRIVE
Switch between regular sinewave resonance and overdriven/waveshaped,
harmonic-rich resonance
CV LEVEL
Adjust the CUTOFF/OFFSET manually
EG OUT
This is 0 - +10V decay envelope output
RESONANCE
This is the RESONANCE control. When set in far clockwise positions the Black
LPG goes into self-oscillation in all mode
DECAY CV
This is Decay CV input. Positive CV will increase a decay time
INPUT
This is the audio signal input
OUT
This is the audio output
CV IN
This is the CUTOFF/OFFSET CV input
DECAY
This is the manual Decay time adjustment knob. The Decay CV is added
to the knob setting
TRIGGER
This is the Trigger input. +5V trigger/gate will initiate a decay envelope.
THE LED gives a visual reference of the envelope state
MODE CV
This is the MODE CV input. The CV is added to the MODE switch position
MODE
Select between VCA/VCA+VCF/VCF modes. The MODE CV is added to the
selection, so, if you apply regular LFO signal and leave the switch in a mid position,
all modes will be covered


Product specificaties

Merk: Erica Synths
Categorie: Niet gecategoriseerd
Model: Black LPG

Heb je hulp nodig?

Als je hulp nodig hebt met Erica Synths Black LPG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Erica Synths

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd