Epson WorkForce 60 Handleiding

Epson Printer WorkForce 60

Lees hieronder de 📖 handleiding in het Nederlandse voor Epson WorkForce 60 (4 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Start Here

Read these instructions before using your product.

1 Unpack

Power cordUSB cable

Caution: Do not open ink cartridge packages until you are ready to

install the ink. Cartridges are vacuum packed to maintain reliability.

Remove all protective materials.

2 Turn on

1 Connect the power cable.

Do not connect to your computer yet.Caution:

2 Press the button.Power

3 Install ink cartridges

1 Lift up the printer cover.

2 Open the cartridge cover.

3 Shake the ink cartridges gently 4 or 5 times, then unpack

them.

4 Remove only the yellow tape from each cartridge.

Caution: Don’t remove any other seals or the cartridges may

leak.

5 Insert the cartridges in the holder for each color. Press

each cartridge down until it clicks.

6 Close the cartridge cover. Press down until it clicks.

7 Lower the printer cover.

8 Press the button to prime the ink delivery system. Ink

This takes several minutes.

Note: Your printer ships with full cartridges and part of the ink

from the first cartridges is used for priming the printer.

Caution: Don’t turn off the printer while it is priming or you’ll

waste ink.

*411961800*

6 Replace the paper cassette cover, then gently insert the

paper cassette.

Note: The paper may slide forward slightly as you insert the

cassette. This is normal.

7 Extend the output tray as shown.

5 Choose your connection

You can connect your printer to your existing network

(wireless or wired) or directly to your computer using a USB

cable. See below for details on each connection method.

Wireless Connection

You must install the software on every computer from which

you want to print. For the ﬁrst installation, we recommend

using a USB cable to simplify wireless setup. After the printer

is connected to the network, you will be prompted to remove

the cable.

Make sure you know your network name (SSID) and network

password:

• Network name

• Network password

If you don’t have this information, contact the person who set

up your network.

Direct USB Connection

Make sure you have a USB cable. Do not connect the printer

to your computer until you’re instructed to do so.

Wired Ethernet® Connection

Make sure you have an Ethernet network cable (not included).

You must install the software on every computer from which

you want to print.

4 Load paper

You can load letter-, A4-, or legal-size paper, as well as

4 6-, 5 7-, or 8 10-inch photo paper. For instructions on

loading legal-size paper, see the online User’s Guide.

1 Pull out the paper cassette and lift off the paper cassette

cover.

2 Slide the edge guides outward.

3 Position the guide shown below for the size of paper

you’re using.

4 6-inch

LTR

Letter-size

4 Insert the paper with the glossy or printable side face-

down.

4 6-inch Letter-size

Note: Make sure the paper is loaded against the edge guide

and not sticking out from the end of the cassette.

5 Slide the edge guides against the paper, but not too

tight. Make sure the paper is under the tabs on the edge

guides.

Letter-size4 6-inch

Any questions?

On-screen help with your software

Select or when you’re using your software.Help ?

User’s Guide

Click the desktop shortcut to access the online User’s Guide,

software downloads, Epson Supplies CentralSM, and more

(requires an Internet connection).

Epson Technical Support

Visit (U.S.) or epson.com/support epson.ca/support

(Canada) where you can download drivers, view manuals, get

FAQs, or e-mail Epson.

You may also speak with a support specialist by calling:

• U.S.: (562) 276-7202, 6 to 8 , Paciﬁc Time, Monday AM PM

through Friday, and 7 to 4 SaturdayAM PM

• Canada: (905) 709-2567, 6 to 6 , Paciﬁc Time, AM PM

Monday through Friday

Days and hours of support are subject to change without

notice. Toll or long distance charges may apply.

Any problems?

If you experience problems during setup, see below:

Network setup was unsuccessful.

• Make sure you select the right network name.

• If you see a ﬁrewall alert message, click or Unblock Allow

to let setup continue.

• If your network has security enabled, make sure you enter

your network password (WEP key or WPA passphrase)

correctly. If it has uppercase ( ) or lowercase ( ) ABC abc

letters, make sure you enter them correctly.

• Try moving the product to a different location. Avoid

placing it next to a microwave oven, 2.4 GHz cordless

phone, or large metal object such as a ﬁling cabinet.

• If your wireless router doesn’t broadcast its network name

(SSID), manually enter your wireless network name. Make

sure there aren’t any access restrictions (such as MAC

address ﬁltering) set on the wireless router. If access

restrictions are set, register the product’s MAC address

on the router. Print a Network Status Sheet (see below) to

obtain the MAC address. Then see your router’s manual for

instructions.

• Print a Network Status Sheet to see what network settings

are currently enabled in the printer. Press the Network

Information button to print a network status sheet.

• Remove and reinsert the CD to reinstall your product

software.

• If you’re using the WiFi button to connect to your

WPS-compatible wireless router, make sure you press the

WiFi button on your printer and the WPS button on

your router within 2 minutes of each other.

6 Install software

1 Make sure the printer is to your NOT CONNECTED

computer.

Windows®: If you see a Found New Hardware screen, click

Cancel and disconnect the USB cable. You can’t install your

software that way.

2 Insert your product CD.

Windows: If you see the AutoPlay window, click

Run Setup.exe. If you see the User Account Control screen,

click Yes Continue or .

Macintosh®: Double-click the icon.Epson

3 Windows: Click and follow the on-screen Install

instructions.

Macintosh: Select the items you want to install. Then

click .Install

The product’s WiFi light is on but you cannot print.

Product specificaties

Merk:	Epson
Categorie:	Printer
Model:	WorkForce 60
Gewicht:	4490 g
Breedte:	444 mm
Diepte:	558 mm
Hoogte:	155 mm
Kleur:	Ja
Wi-Fi-standaarden:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
USB-poort:	Ja
Ethernet LAN:	Ja
Markt positionering:	Thuis & kantoor
Aantal USB 2.0-poorten:	1
Stroomverbruik (in standby):	0.2 W
Intern geheugen:	- MB
Duurzaamheidscertificaten:	ENERGY STAR
Ondersteunt Windows:	Ja
Temperatuur bij opslag:	-20 - 40 °C
Power LED:	Ja
Compatibele besturingssystemen:	- Windows 7, Windows Vista, Windows XP, Windows XP x64\n- Mac OS X5, 10.4.11, 10.5.8 and 10.6.x
Ondersteunt Mac-besturingssysteem:	Ja
Luchtvochtigheid bij opslag:	5 - 85 procent
Maximale resolutie:	5760 x 1440 DPI
Aantal printcartridges:	4
Printkleuren:	Black, Cyan, Magenta, Yellow
Papierlade mediatypen:	Photo paper, Plain paper
Standaard interfaces:	Ethernet, USB 2.0, Wireless LAN
Printsnelheid (zwart, standaardkwaliteit, A4/US Letter):	15 ppm
Printsnelheid (kleur, standaard, A4/US Letter):	7.1 ppm
Duplex printen:	Ja
Gebruiksindicatie (maximaal):	- pagina's per maand
Totale invoercapaciteit:	250 vel
Totale uitvoercapaciteit:	- vel
Maximale ISO A-series papierformaat:	A4
ISO A-series afmetingen (A0...A9):	A4, A5, A6
Direct printen:	Ja
Gemiddeld stroomverbruik tijdens printen:	16 W
ISO B-series afmetingen (B0...B9):	B5
Fotopapier afmetingen (imperial):	4x6, 5x7, 8x10, 3.5x5 "
Kleurenscans:	Ja
Wifi:	Ja
AC-ingangsspanning:	100 - 120 V
AC-ingangsfrequentie:	50/60 Hz
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent
Geluidsniveau tijdens afdrukken:	48 dB