Epson STYLUS C82 Handleiding

Epson Printer STYLUS C82

Lees hieronder de 📖 handleiding in het Nederlandse voor Epson STYLUS C82 (1 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Unpacking

1. Unpack the printer.

2. Attach the printer parts.

3. Connect the printer.

Setting up

Installing the Printer Software

Note:

For installing the Photo Print Software, refer to the Photo Print Software Setup on the

online Reference Guide.

For Windows

1. Make sure that the printer is off.

2. Insert the printer software CD in the CD-ROM drive.

If the Installer dialog box does not appear, double-click

SETUP.EXE in the CD-ROM.

3. Select Install Software, and then click .

4. Follow the on-screen instructions. After installing the printer

software, the on-screen instructions continue with the

installation of the ink cartridges.

For Macintosh

cCaution:

Turn off all virus protection programs before you install the printer software.

For users of Mac OS 8.1 or later (Except Mac OS X)

1. Make sure that the printer is off.

2. Insert the printer software CD in the CD-ROM drive.

3. Double-click the EPSON icon, select Install Software, and then click .

4. Follow the on-screen instructions to install the printer software.

5. Press the P power button to turn on the printer. The print head moves to the ink cartridge

installation position.

6. Choose Chooser from the Apple menu. Then, select the icon

for your printer and the port that your printer is connected to.

For Mac OS X users

1. Make sure that the printer is off.

2. Insert the printer software CD in the CD-ROM drive.

3. Double-click the Mac OS X Driver folder, and then double-click the C82Series.pkg icon

inside it.

If the Authorization window opens, click the key icon, enter the administrator’s name

and password, click OK, and then click Continue.

4. Follow the on-screen instructions to install the printer software.

5. Press the P power button to turn on the printer. The print head moves to the ink cartridge

installation position.

6. Follow the instruction below to select your printer:

Double-click Macintosh HD. → Double-click the Application folder. → Double-click the

Utilities folder. → Double-click the Printer Center icon. → Click Add. → Select EPSON USB.

→ Select your printer. → Click Add.

Installing the Ink Cartridges

Note:

For best results, shake the ink cartridge four

or five times before opening the package.

1. Remove the new ink cartridges from their

protective bag.

cCaution:

❏Be careful not to break the

hook on the side of the cartridge when you remove it from the protective

bag.

❏Do not shake the ink cartridge after removing from the bag; this can cause

leakage.

❏Do not remove or tear the label on the cartridge; this can cause leakage.

❏Do not touch the green IC chip on the side of the cartridge.

Doing so may prevent normal operation and printing.

2. Lower the output tray, then open the printer cover.

cCaution:

Do not move the print head by hand, as this may damage

the printer.

3. Place the ink cartridges vertically into the

cartridge holders. Without applying

excessive force, push the ink cartridges

down until they click into place.

Note:

Install all ink cartridges. The printer will

not work unless all cartridges are

installed properly.

4. Close the printer cover.

5. Press the Hink button. The printer moves the print head and

begins charging the ink delivery system. This process takes

about one and half minutes. While charging, the Ppower light

flashes and the printer produces a variety of mechanical

sounds. This is normal.

cCaution:

❏Do not turn the power off during the ink

charging process.

❏Do not load paper until ink charging is complete.

Note:

❏If the ink end error occurs after the print head moves to its home position, the

ink cartridge may not be installed properly. Press the Hink button again, and

reinstall the ink cartridge until it clicks into place.

❏The ink cartridges packaged with your printer are partly used during initial setup.

In order to produce high quality printouts, the print head in your printer will be

fully charged with ink. This one-off process consumes a quantity of ink and

subsequent cartridge sets will last for their full rated life.

6. When the ink charging process is finished, the Ppower light stops flashing and remains on.

The contents may vary in certain locations.

Power cord may come

attached in some

countries.

Setup

Insert the paper support until it clicks into place.

Do not touch this part.

Checking the Printer

Loading Paper

Your printer is now ready to use.

See “Printing Basics” on the online Reference Guide for detailed instructions when

printing for the first time.

The online Reference Guide also contains information on the following:

Please refer to it for more details.

Accessing the Online Reference Guide

Follow these steps to access the online Reference Guide.

1. Insert the printer software CD in the CD-ROM drive.

2. For Windows, select User Guides in the dialog box, and then click .

For Macintosh, double-click the EPSON icon, select User Guides, and then click .

On Mac OS X, the dialog box does not appear when the printer software CD is inserted. To

access the online Reference Guide, double-click English\User Guides\REF_G\INDEX.HTM.

Problem Solver

Online problem-solving

The EPSON’s Technical Support Web Site provide you with tips to help solve problems. Access

the Technical Support in the following ways:

For Windows users

❏You can also access them by clicking Technical Support in the Status Monitor 3 dialog box or on

the Main menu of the printer software.

For further information on the customer support services available in your area, see the online

Reference Guide.

For users of Mac OS 8.1 or later (Except Mac OS X)

1. Insert the CD in the CD-ROM drive.

2. Double-click EPSON icon.

3. Select Technical Support Web Site and click .

For further information on the customer support services available in your area, see the online

Reference Guide.

For Mac OS X users

Access the site at:

http://support.epson.net/StylusC82/

Error indicators

You can identify many common problems using the lights on the printer’s control panel.

Use the following table of light patterns to diagnose the problem, and then follow the

recommended corrective measures.

O O = on, N = off, k k = flashing

Safety Instructions

Read all of the instructions in this section when setting up and using your printer.

When choosing a place for the printer

❏Avoid places subject to rapid changes in temperature and humidity. Also, keep the printer away

from direct sunlight, strong light, or heat sources.

❏Avoid places subject to dust, shocks, and vibrations.

❏Leave enough room around the printer to allow for sufficient ventilation.

❏Place the printer near a wall outlet where the plug can be easily unplugged.

❏Place the printer on a flat, stable surface that extends beyond the printer base in all directions. If

you place the printer by the wall, leave more than 10 cm between the back of the printer and

the wall. The printer will not operate properly if it is tilted at an angle.

❏When storing or transporting the printer, do not tilt it, put it vertically or turn it upside down;

otherwise, ink may leak from the cartridge.

When choosing a power source

❏Use only the type of power source indicated on the printer’s label.

❏Be sure your AC power cord meets the relevant local safety standard.

❏Do not use a damaged or frayed power cord.

❏If you use an extension cord with the printer, make sure that the total ampere rating of the devices

plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure that

the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s

ampere rating.

❏If you plan to use the printer in Germany, the building installation must be protected by a 10 or

16 amp circuit breaker to provide adequate short-circuit protection and over-current protection

for this printer.

When handling ink cartridges

❏Do not open the ink cartridge packages until just before you install them.

❏Before installing the new ink cartridge, shake it four or five times before opening its package.

❏Do not shake the ink cartridges after removing from the bag; this can cause leakage.

❏Be careful not to break the hooks on the side of the ink cartridge when you remove it from the

package.

❏Keep ink cartridges out of the reach of children. Do not allow children to drink from or otherwise

handle the cartridges.

❏Be careful when you handle used ink cartridges, as there may be some ink remaining around the

ink supply port. If ink gets on your skin, wash the area thoroughly with soap and water. If ink gets

into your eyes, flush them immediately with water. If discomfort or vision problems remain after a

thorough flushing, see a doctor immediately.

❏Do not touch the green IC chip that is located on the side of the cartridge.

❏Do not remove or tear the label on the cartridge; this can cause leakage.

❏Store each ink cartridge so that the bottom of its packaging faces down.

When using the printer

❏Do not put your hand inside the printer or touch the ink cartridges during printing.

❏Do not block or cover the openings on the printer.

❏Do not attempt to service the printer yourself.

❏Unplug the printer and refer servicing to qualified service personnel under the following conditions:

The power cord or plug is damaged; liquid has entered the printer; the printer has been dropped

or the cabinet damaged; the printer does not operate normally or exhibits a distinct change in

performance.

❏Do not insert objects into the slots on the printer.

❏Take care not to spill liquid on the printer.

❏Leave the ink cartridges installed. Removing the cartridges can dehydrate the printer head and

may prevent the printer from printing.

Information for United Kingdom Users

Use of options

EPSON (UK) Limited shall not be liable against any damages or problems arising from the use

of any options or consumable products other than those designated as Original EPSON

Products or EPSON Approved Products by EPSON (UK) Limited.

Safety information

wWarning:

Refer to the rating plate for the voltage and check that the appliance voltage corresponds

to the supply voltage.

Important: The wires in the mains lead fitted to this appliance are coloured in accordance

with the following code:

Blue — Neutral

Brown — Live

If you have to fit a plug:

As the colours of the mains lead of this appliance may not match the coloured markings

used to identify the terminals in a plug, please observe the following:

❏The blue wire must be connected to the terminal in the plug marked with the letter N.

❏The brown wire must be connected to the terminal in the plug marked with the letter L.

❏If the plug is damaged, replace the cord set or consult a qualified electrician.

❏Replace fuses only with fuses of the correct size and rating.

❏Various Printing Options ❏Problem Solver

❏Printer Software Functions ❏Product Information

❏How To ❏Safety Instructions

printable side up

left edge guide

output tray

extension Windows

Macintosh

Lights Problem and Solution

O ) Paper out No paper is loaded in the printer.

Load paper in the sheet feeder, and then press the )paper button. The printer

resumes printing and the light goes out.

k )

N H

Paper jam Paper has jammed in the printer.

Press the )paper button to eject the jammed paper. If the error does not clear,

open the printer cover and remove all of the paper inside, including any torn pieces.

Then, reload the paper in the sheet feeder and press the )paper button to resume

printing.

k H Ink low The ink cartridge is nearly empty.

Obtain a replacement black (T0321), cyan (T0422), magenta (T0423), or yellow

(T0424) ink cartridge. To determine which cartridge is nearly empty, check the ink

level using EPSON Status Monitor 3 (Windows) or EPSON StatusMonitor (Macintosh).

O H Ink out The ink cartridge is empty or not installed.

Replace the black (T0321), cyan (T0422), magenta (T0423), or yellow (T0424) ink

cartridge with a new one.

Wrong cartridge The currently installed ink cartridge cannot be used by this

printer.

Use the appropriate black (T0321), cyan (T0422), magenta (T0423), or yellow (T0424)

ink cartridge.

O P

O H

Incorrectly installed ink

cartridge The ink cartridge is not installed correctly.

If the print head is at the home position, press the Hink button to move the print

head to the ink cartridge replacement position. Remove and reinsert the ink

cartridge. Then continue with ink cartridge installation.

If the print head is at the ink cartridge replacement position, remove and reinsert

the ink cartridge. Then continue with ink cartridge installation.

O P

k )

O H

Carriage error The print head carriage is obstructed by jammed paper

or other foreign material and cannot return to the home

position.

Turn off the printer. Open the printer cover and remove any paper or other

obstructions from the paper path by hand. Then, turn the printer back on.

If the error does not clear, contact your dealer.

O P

k )

k H

Unknown printer error An unknown printer error has occurred.

Turn off the printer and contact your dealer.

Setup English

4025629-00

xxx

cCautions must be observed to avoid

damage to your equipment.

Notes contain important information and useful

tips on the operation of your printer.

Warnings, Cautions and Notes

wWarnings must be followed

carefully to avoid bodily.

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON

CORPORATION. The information contained herein is designed only for use with this EPSON printer. EPSON is not responsible for any use of this information as applied to other printers. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable

to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or

(excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION's operating and maintenance instructions.

SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON

CORPORATION. SEIKO EPSON CORPORATION shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as EPSON-Approved Products by SEIKO

EPSON CORPORATION. EPSON is a registered trademark and EPSON Stylus is a trademark of SEIKO EPSON CORPORATION.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

Apple and Macintosh are registered trademarks of Apple Computer, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.