Epson Perfection 2480 Photo Handleiding

Epson Scanner Perfection 2480 Photo

Lees hieronder de 📖 handleiding in het Nederlandse voor Epson Perfection 2480 Photo (8 pagina's) in de categorie Scanner. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Epson Perfection 2480 Photo

Epson Perfection 2580 Photo

Unpack Your Scanner

1Make sure you have all the parts shown below for your Epson scanner:

2Remove all the packing tape, but leave the large stickers in place until

you are instructed to remove them.

Note: The illustrations on this sheet show the Perfection 2580 Photo scanner,

but the instructions are the same for the Perfection 2480 Photo except

where noted.

Install the Software

Wait! You must install your software before connecting the scanner to

your computer. The installation process may take several minutes. Be sure

to close all open programs and turn off any virus protection programs.

Note: The software works with Windows® 98SE, Me, 2000, and XP, and

Macintosh® OS 9.1 to 9.2.2 and OS X 10.2.x and 10.3.x.

1Insert the scanner software CD-ROM in the CD-ROM or DVD drive. The

installer starts automatically in Windows; on a Macintosh, the EPSON

folder opens.

If it doesn’t start or the folder doesn’t open, do the following:

•Windows XP: Click Start, click My Computer, then

double-click Epson.

•Windows 98, Me, and 2000: Double-click My Computer, then

double-click Epson.

•Macintosh: Double-click the Epson CD-ROM icon.

® ®

Scanner

CD-ROM with Epson Scan

driver, software, and

on-screen manuals

USB cable Film and slide

holder

AC adapter and

power cord

Perfection 2480 Photo

CD-ROM with Epson Scan

driver, software, and

on-screen manuals

USB cable

Scanner

Slide holder

AC adapter and

power cord

Perfection 2580 Photo

IMPORTANT!

Leave the sticker

in place until you

are instructed to

remove it

Start Here

4048777-00 XXX

2If you’re using Mac® OS X, double-click the Mac OS X folder, then

double-click the Epson icon.

If you’re using Mac OS 9.x, double-click the Epson icon.

3Click Continue, then read the license agreement and click Agree.

4At the Software Installation screen, click Install. Enter your Macintosh

Administrator name and password as necessary during installation.

5Follow the on-screen instructions to install each program. Click Next or

Finish (Windows) or Install or Quit (Macintosh) as needed. Note that

Epson Smart Panel™ installs in several steps.

Note: If you’re installing on Macintosh OS 9.x, you may see a prompt to

update your Carbon Library. After installing it and restarting your system,

double-click the Epson icon, then click Install to continue.

6At the end of the installation, click Exit.

7At the Product Registration screen, register your scanner as instructed.

Connect the Scanner

After your software is installed, it’s time to connect your scanner.

1Remove the sticker wrapped

around the front of the scanner

covering the transportation lock

on the bottom.

Caution: Don’t turn the scanner

over to access the lock or you

may damage the scanner.

2Slide the transportation lock

to the unlock position.

3Remove the yellow sticker.

4Connect the cable for the built-in transparency unit (scanner cover).

5Plug the square end of the USB cable into the scanner’s USB port. Then

plug the flat end into any available USB port on your computer or hub.

Note: Your scanner may not work correctly if you use a USB cable other

than the one supplied by Epson or connect it through more than one hub.

Click Install

Remove

sticker

6Connect the scanner’s power cord as shown below.

The scanner turns on and the ] Start light flashes green. It stops flashing

and stays on green when the scanner is ready.

Caution: When you unplug the scanner, wait at least 10 seconds before

plugging it back in. Rapidly unplugging and plugging in the scanner can

damage it.

7Remove and store your scanner software CD-ROM.

8Restart your computer.

Scanner Basics

Your First Scan

The ] Start button on your scanner automatically opens Epson Smart Panel,

making it easy for you to scan your images for many different uses. Here’s how

to use the ] Start button to scan photos and save them as files.

1Raise the scanner cover and place your photo

face down on the glass. Make sure the top of

the document is against the front edge of

the scanner glass.

2Close the scanner cover.

3Press the ] Start button on your scanner.

Note: In Windows, if you see a message when you press the ] Start button,

select EPSON Smart Panel, click Always use this program for this

action, then click OK.

Epson Smart Panel opens on your computer.

4Click the Scan and Save button.

Product specificaties

Merk:	Epson
Categorie:	Scanner
Model:	Perfection 2480 Photo
Gewicht:	3000 g
Gewicht verpakking:	5106 g
Breedte verpakking:	305 mm
Diepte verpakking:	500 mm
Hoogte verpakking:	155 mm
USB-poort:	Ja
Land van herkomst:	China
USB-versie:	2.0
Type beeldsensor:	CCD
Aantal per verpakking:	1 stuk(s)
Meegeleverde software:	EPSON Scan\nArcsoft Photo Impression 5\nEPSON Smart Panel\nNewsoft Presto Biz 4 LE\nOnline User Guide\nABBYY FineReader Sprint 5.00
Compatibele besturingssystemen:	Microsoft Windows 98 SE /Me / 2000 Professional / XP Home Edition / XP Professional (pre-installed model or upgrade of Windows 98 / Me / 2000 Professional pre-installed model) \nMac OS 9.1or later, Mac OS X 10.2.7 or later
Mac-compatibiliteit:	Ja
Standaard interfaces:	USB 2.0
Soort scanner:	Flatbed scanner
Optische scanresolutie:	2400 x 4800 DPI
Duplex scannen:	Nee
Maximum scanformaat:	216 x 297 mm
Kleurenscans:	Ja
Producten per pallet:	52 stuk(s)
Bedrijfstemperatuur (T-T):	5 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 80 procent
Pallet brutohoogte:	2165 mm
Pallet brutobreedte:	800 mm
Pallet brutolengte:	1200 mm
Producten per palletlaag:	4 stuk(s)
Producten per pallet (UK):	65 stuk(s)
Palletlengte (UK):	1200 mm
Producten per palletlaag (UK):	5 stuk(s)
Palletbreedte (UK):	1000 mm
Pallethoogte (UK):	2165 mm