Epson emp 8300 lcd projector Handleiding
Epson
Beamer projector
emp 8300 lcd projector
Lees hieronder de 📖 handleiding in het Nederlandse voor Epson emp 8300 lcd projector (16 pagina's) in de categorie Beamer projector. Deze handleiding was nuttig voor 62 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/16
Signal Refresh rate (Hz) Resolution (dots) Resolutions for resized display (dots)
EMP-9300 EMP-8300
SVGA
XGA
SXGA
SXGA
SXGA+
UXGA
MAC13"
MAC16"
MAC19"
MAC21"
SDTV
(525i,525p,625i,625p)
HDTV(750p)
HDTV(1125i,1125p)
VGA
EGA
56/60/72/75/85/100/120, iMac*1
60/72/75/85/100/120, iMac*1
60/70/75/85/100, iMac*1
60/70/75/85
60/75/85
60
60/65/70/75/80/85
640 × 480
800 × 600
1024 × 768
1152 × 864*2
1280 × 960*2
1280 × 1024*2
1400 × 1050*2
1600 × 1200*2
640 × 480
832 × 624
1024 × 768
1152 × 870*2
640 × 350
1024 × 768
1024 × 768
1024 × 768
1024 × 768
1024 × 768
960 × 768
1024 × 768
1024 × 768
1024 × 768
1024 × 768
1024 × 768
1016 × 768
1024 × 768
(4:3 aspect ratio)
1024 × 576
(16:9 aspect ratio)
1024 × 576
1024 × 576
1400 × 1050
1400 × 1050
1400 × 1050
1400 × 1050
1400 × 1050
1312 × 1050
1400 × 1050
1400 × 1050
1400 × 1050
1400 × 1050
1400 × 1050
1400 × 1050
1400 × 1050
(4:3 aspect ratio)
1400 × 788
(16:9 aspect ratio)
1400 × 788
1400 × 788
1024 × 560
VGACGA 640 × 400 1024 × 640
VGAEGA 640 × 350 1024 × 560
VGA text 720 × 350 1024 × 498
720 × 400
1400 × 766
1400 × 875
1400 × 766
1400 × 680
1400 × 778 1024 × 569
Printed on 100% recycled paper.
*1 Connection is not possible if the equipment does not have a VGA output port.
*2 The resolution for real display is the virtual (window) display resolution.
It may be possible to project signals which are not listed in the above table.
However, not all functions may be supportable with such signals.
User's Guide
"List of Supported Monitor Displays"
404696900E
03.09-.6A(C05)
Printed in Japan
List of Supported Monitor Displays
Before setting up and using this
projector, be sure to read the
User's Guide.
Do not look directly into the
projector's lens.
WARNING
Connections .................................1
Projection Preparation and
Adjustments ..................................3
Turning the Projector off ................5
Functions for Enhancing
Projection ..................................... 6
List of Configuration Setting
Menus .........................................10
Troubleshooting ...........................11
List of Supported Monitor
Displays ...........................Last page
Quick Reference Guide
9300E_cover1-4
The lamp is near the end of its operating life. Replace the lamp with a new one as soon as possible.
If you continue to use the old lamp, the possibility that the lamp may break will increase.
The lamp will switch off automatically
and projection will stop.
Wait for approximately 5 minutes.
After this, check the points to the
right. (With the EMP-8300, disconnect
the power plug first.)
User's Guide "Replacing the Lamp"
If you continue using the projector and
the temperature rises again, the lamp
will switch off automatically.
Check the points to the right.
If the indicator is flashing orange Warning
Indicator is lit or flashing green or orange Normal
If you press the button, projection will start after warm-up is complete.
Warm-up time is approximately 40 seconds.
After warm-up is complete, the indicator will change to steady green and projection will start.
Normal operation is in progress.
Cool-down time is approximately 30 seconds.
After cool-down is complete, the projector goes into standby mode.
You cannot use the remote control or the projector's control panel during cool-down.
If the problem is not fixed, stop
using the projector and
disconnect the power plug from
the electrical outlet.
Then contact your dealer or the
nearest address provided in the
"International Warranty
Conditions" section of the
Safety Instructions/World Wide
Warranty Terms
booklet.
If the projector
is close to a
wall, move it
away from the
wall.
Clean the air
filters if they are
blocked.
lit flashing off
lit flashing off
Standby
condition
Orange
Cool-down in
progress
Orange
Warm-up in
progress
Green
Projection in
progress
Green
Internal
temperature
error
(overheating)
Red
Red
High-speed
cooling in
progress
Orange
Red
Lamp
replacement
notification
Orange
DVI-D/DVI-D
digital video cable
or DVI-D/DFP
digital video cable
(optional)
VGA-HD15/
BNC PC cable
(optional)
Computer
cable or
VGA-HD15
PC cable
(accessory or optional)
Connecting to a
computer
The [Audio] port to use is
the port that is in the same
box as the port being used
to input the video signals.
* An accessory audio cable
is not supplied with the
EMP-9300. Use a
commercially-available
audio cable instead.
RCA audio cable
(commercially-
available)
To computer's
audio output port
To computer's
audio output port
Audio cable
(accessory)
To computer's monitor
output port
(Mini D-Sub 15-pin)
To computer's monitor
output port
(DVI-D or DFP)
Connections Be sure to turn the power for all components off before making any
of the following connections.
User's Guide
"Connecting to a Computer"
"Connecting to a Video Source"
9300E-QRG_01-14
Adapters
(commercially-
available)
Computer
cable or
VGA-HD15
PC cable
(accessory or
optional)
RGB video
cable
(commercially-
available)
Component
video cable
(commercially-
available)
S- Video
cable
(commercially-
available)
RCA video
cable
(commercially-
available)
(RCA pin jack (yellow))
To video
output port
(Mini DIN 4-pin)
To S-Video
output port
(RCA pin jack × 3
(red, green, blue))
To component video
output ports
(3BNC)
To RGB
output ports
(Mini D-Sub 15-pin)
To RGB
output port
To audio
output port
RCA audio cable
(commercially-
available)
Audio cable
(accessory)
To audio output port
Connecting to video
equipment
Lamp cover is
open error./
Lamp timer
failure/Lamp out
Fan related error
/
Sensor error
Internal error
Red
Red
Red
Red
Red
Red
Red
(Temperature) indicator
(Lamp) indicator
(Operation) indicator
Disconnect the power cable from the electrical outlet.
Then contact your dealer or the nearest address provided in the "International Warranty
Conditions" section of the
Safety Instructions/World Wide Warranty Terms
booklet.
Check if the lamp is broken.
Disconnect the power plug from the electrical outlet and wait for the lamp to cool down
sufficiently (takes about one hour) before checking.
User's Guide "Replacing the Lamp"
User's Guide
"Reading the Indicators"
The projector is provided with indicators to notify you of
the operating status of the projector.
The following tables show what the indicators mean
and how to remedy the problems that they indicate.
If the indicator is flashing or lit red Problem/Warning
Reading the indicators
lit flashing off
If the problem is still not solved after the lamp is
replaced, stop using the projector and disconnect
the power cable from the electrical outlet. Then
contact your dealer or the nearest address
provided in the "International Warranty Conditions"
section of the
Safety Instructions/World Wide
Warranty Terms
booklet.
Replace the
lamp and
then turn the
power on.
If the lamp
still does not
turn on,
replace it with
a new lamp.
Contact your local dealer for further advice.
If the lamp is
not broken
If the lamp is
broken
The [Audio] port to use is
the port that is in the same
box as the port being used
to input the video signals.
* An accessory audio cable
is not supplied with the
EMP-9300. Use a
commercially-available
audio cable instead.
9300E-QRG_02-13
Product specificaties
| Merk: | Epson |
| Categorie: | Beamer projector |
| Model: | emp 8300 lcd projector |
Heb je hulp nodig?
Als je hulp nodig hebt met Epson emp 8300 lcd projector stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Beamer projector Epson
23 December 2022
23 December 2022
16 November 2021
16 Augustus 2022
15 Augustus 2022
16 November 2021
16 Augustus 2022
17 Augustus 2022
24 November 2021
16 Augustus 2022
Handleiding Beamer projector
- Beamer projector Philips
- Beamer projector HP
- Beamer projector Sony
- Beamer projector Casio
- Beamer projector Panasonic
- Beamer projector Canon
- Beamer projector JVC
- Beamer projector Medion
- Beamer projector Toshiba
- Beamer projector Yamaha
- Beamer projector Aaxa
- Beamer projector Acer
- Beamer projector Aiptek
- Beamer projector Apeman
- Beamer projector Auna
- Beamer projector Bauer
- Beamer projector BenQ
- Beamer projector Brookstone
- Beamer projector Dell
- Beamer projector DreamVision
- Beamer projector Eiki
- Beamer projector Eumig
- Beamer projector FengMi Wemax
- Beamer projector Fenton
- Beamer projector Ibm
- Beamer projector InFocus
- Beamer projector Kodak
- Beamer projector La Vague
- Beamer projector Legamaster
- Beamer projector Mitsubishi
- Beamer projector Nebula
- Beamer projector Nec
- Beamer projector Nobo
- Beamer projector Nor-tec
- Beamer projector Sagem
- Beamer projector Sanyo
- Beamer projector Skytronic
- Beamer projector Stereoboomm
- Beamer projector Viewsonic
- Beamer projector Vivitek
- Beamer projector XGIMI
- Beamer projector Optoma
- Beamer projector Overmax
Nieuwste handleidingen voor Beamer projector
28 September 2024
7 Januari 2024
22 September 2023
31 Augustus 2023
27 Augustus 2023
31 Augustus 2023
27 Augustus 2023
31 Augustus 2023
31 Augustus 2023
31 Augustus 2023