Entes ERTC-01-DIN Handleiding

Entes Niet gecategoriseerd ERTC-01-DIN

Lees hieronder de 📖 handleiding in het Nederlandse voor Entes ERTC-01-DIN (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
ERT/ERTC-01 is a microcontroller controlled programmable time relay device with a
wide range of time scale designed to operate in one of 4 different functions that are
On delay Off delay Down timer Flasher, , , modes. Output relay is controlled by set
value that can be set between 1.0 sec îš– 100 hours. Programmed function and set
values are recorded at non-volatile memory. Functions and set values can be
programmed easily by buttons on the front panel. ERT/ERTC-01 has optically isolated
Start, Stop and Reset inputs.
Functions:
On Delay: In the On Delay mode, after the device is energized, the timer starts to
count up and when it reaches the adjusted time , the relay is energized. (dLYOn)
Off Delay: In the Off Delay mode, after the device is energized and with start input ,
the relay is energized and becomes de-energized at the end of the time adjusted by
the user. (dLYOFF)
Down Timer: In the Down Timer mode, after the device is energized, the down counter
starts to count down from the time adjusted by the user and when it reaches zero, the
relay is energized. (dO Cnt)
Flasher: In the Flasher mode, after the device is energized, when time ends thetOFF
relay is energized and becomes de-energized at the end of the delay The tOn (FLSHEr).
starting mode of the flasher mode can be choosen with or . In the StOFFStOFF StOn
mode flasher starts with tOFF and energized after the tOFF value, then continiues to
tOn mode. In the StOn mode flasher starts with tOn and deenergized after the tOn
value, then continues to tOFF mode. The Flasher function is continuously repetitive.
Inputs: Start input is used to begin counting, Stop input is used to end counting and
Reset input is used to clear counter in dlYOn,dlyOFF and FLSHEr. In dO Cnt mode
reset, sets the dO Cnt value. One of this three inputs activated by connecting them
to GND.
Function Select:
The device is programmed by pressing the SET buttun for 3 secs. Then program menu
starts with blinking of dLYOn. With UP and DOWN button desired mode dLYOn,
dLYOFF, dO Cnt or FLSHEr, and the mod led blinks. After pressing the SET button
display stops blinking that this mode is choosen. Pressing once to SET button shows
the old time value of this mode with blinking and this could be adjusted with UP and
DOWN button. Pressing to UP or DOWN button continious, increases or decreases
the left digit. For all the other functions, the left digit is changed the same way. After
adjusting the time value, pressing the SET button stops the display blinking, but led
button still blinks (Note that this setting operations need a few steps more for FLSHEr
mode). After pressing the SET button last time mod led stops blinking, desired mod
and value are set and writed to non-volatile memory.
Device can be started to counting with start input. With stop input device stops
counting until stop input is deactivated. Reset input resets the time values. Device
can be started with pressing set and up button at same time (same function with
start input). Pressing set and down button at the same time stops counting.( same
function with stop input). Pressing DOWN and UP button at the same time resets
counting (same function with RESET input).
Technical Data
Operating Voltage(Un) : 230 V AC / 120 V AC
Operating Range (
D
U) : 190 - 260 V AC / 90 - 140 V AC
Operating Frequency (f) : 50/60 Hz
Power Consumption : < 3 VA
Output Contact :1 Change-Over 8A/2000VA
Error :±%0.5 or ±20msec.(Which is higher)
Repetition Error :±%0.1
Reset Time :<= 80 msec.
Ambient Temprature : -5°C; +50°C
Display : Red LED display
Dimension : PK-20 (ERTC-01) , PR-18 (ERT-01)
Equipment Protection : Double Insulation ( )
Degree of Protection : IP 40 (Front Panel)
: IP 20 (Terminal Covers)
Box Material : Nonflammable, (Yellow Certificate no:187982)
Wire Cros section (for terminal)s : 2.5 mm
2
Weight : 0.25 kg
Installation : Rail Mounting (ERTC-01) , Class ýýý (ERT-01)
Package Diemensons : 22 x 18 x 18.5 cm (ERTC-01)
: 37 x 21.5 x 17 cm (ERT-01)
Package Weight : 4 Kg (ERTC-01) , 4.5 Kg (ERT-01)
Pcs Per Package : 16
MULTIFUNCTION ELECTRONIC TIME RELAY
ERT/ERTC-01
*No need of a vantillator in the installation area
Dimensions (ERTC-01):
Dimensions (ERT- 01):
Programming Diagram
On Delay
Off Delay
Down
Counter
Flasher-
StOn Mode
Flasher-
StOFF Mode
On Delay
Time
Off Delay
Time
Down
Counter
Time
Start
Start
tOn
Time
tOn
Time
tOn
Time
tOFF
Time
tOFF
Time tOFF
Time
Relay
Output
Relay
Output
Relay
Output
Relay
Output
Relay
Output
Start
Start
Start
Menu buttons
UpDown SET
Connection Diagram (ERT-01):
Un
1 2 3 4 5 6 7 8 9
NC
NO
C
Start
Stop
Reset
Type PK 20
53 mm
90 mm
45 mm
62 mm
58 mm
32 mm
48 mm
35 mm
3 s SETec
tOFF
time setting
tOn
time setting
StOF or StOn
setting
SET
SET
SET
SET
Start
Start
Start
Reset
Stop
Un
C
NC
NO
Auxiliary
Supply
TyPe PR 18 (72*72)
82.6mm
73.3mm
66mm
73.3mm
Duvar
82.6mm
65.5mm
50mm
72mm
66mm
Connection Diagram
(ERTC-01):
72mm
66mm
ON Delay OFF Delay Down Counter Flasher
Function Leds
Precautions For Installation and Safe Use
Failure to follow those instructions will result in death or serious injury.
Disconnect all power before working on equipment.
When the device is connected to the network, do not remove the front panel.
Do not try to clean the device with solvent or the like. Only clean the device
with a dried cloth.
Verify correct terminal connections when wiring.
Electrical equipment should be serviced only by your compedent seller.
Only for rack panel mounting.
A2874/Rev.3
No responsibility is assured by the manufacturer or any of its subsidiaries
for any consequences arising out of the use of this material.

Product specificaties

Merk: Entes
Categorie: Niet gecategoriseerd
Model: ERTC-01-DIN

Heb je hulp nodig?

Als je hulp nodig hebt met Entes ERTC-01-DIN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Entes

Entes

Entes SER-YU Handleiding

18 November 2024
Entes

Entes GKRC-21E Handleiding

5 November 2024
Entes

Entes GKRC-22E Handleiding

5 November 2024
Entes

Entes ERB-50 Handleiding

5 September 2024
Entes

Entes GEM-10SH Handleiding

23 Augustus 2024
Entes

Entes RGSR-24S-OG Handleiding

23 Augustus 2024
Entes

Entes RGSR-20S-OG Handleiding

23 Augustus 2024
Entes

Entes RG3-15CL Handleiding

23 Augustus 2024
Entes

Entes MPR-53S-96 Handleiding

23 Augustus 2024
Entes

Entes MPR-47S-L Handleiding

23 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Panasonic

Panasonic NB-W250 Handleiding

25 November 2024
Alpine

Alpine CHM-S611 Handleiding

25 November 2024
AOpen

AOpen DE3650-C Handleiding

25 November 2024
Lazer

Lazer Urbanize MIPS Handleiding

25 November 2024
Symmons

Symmons Dia 353GB-24 Handleiding

25 November 2024
SoundTube

SoundTube IPD-RS62-EZ Handleiding

25 November 2024
Moen

Moen Camerist 4905 Handleiding

25 November 2024
Lazer

Lazer Cameleon DLX Handleiding

25 November 2024
DMT

DMT DLD-85 Handleiding

25 November 2024
AOpen

AOpen AM1120T Handleiding

25 November 2024