EMOS P5521N Handleiding

EMOS Niet gecategoriseerd P5521N

Lees hieronder de 📖 handleiding in het Nederlandse voor EMOS P5521N (32 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 123 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/32
1927110012_31-P5521N_00_01_WEB 105 × 148 mm
P5521N
GB Digital Timer Socket
DE Digitale Zeitschaltuhr
HU Digitális időkapcsoló aljzat
SI Digitalna stikalna ura
RS|HR|BA|ME Utičnica s digitalnim timerom
UA Розетка цифрового таймера
RO|MD Priză cu temporizator digital
LT Skaitmeninio laikmačio lizdas
LV Digitālā taimera ligzda
EE Digitaalse taimeriga pistikupesa
BG Гнездо с дигитален таймер
IT Spina temporizzata digitale
ES Enchufe con interruptor digital
NL Digitaal schakelstopcontact
www.emos.eu
2
GB | Digital Timer Socket
Specications
Voltage: 230 V~/50 Hz
Minimum time setting: 1 min
Deviation: ±1 min a month
Switched phase
Max. load: 16 A, 3 680 W
Operating temperature: -10 °C to +40 °C
Battery capacity: NiMH 1.2 V >100 hours
Features
• 8 customisable time programmes (ON/OFF).
• Choice between manual or automatic control (ON/AUTO/OFF).
• 12/24-hour cycle togglable using a switch.
• Switchable to daylight saving time.
• 16 combinations of days or blocks of days:
Mo (MO), Tu, We, Th, Fr
Tu (TU) Sa, Su
We (WE) Mo, Tu, We, Th, Fr, Sa
Th (TH) Mo, We, Fr
Fr (FR) Tu, Th, Sa
Sa (SA) Mo, Tu, We
Su (SU) Th, Fr, Sa
Mo, Tu, We, Th, Fr, Sa, Su Mo, We, Fr, Sa
Installation
1. Plug the timer socket into a 230 V AC socket.
2. Let it charge for approx. 12 hours.
3. Once it is charged, press the MASTER CLEAR button using a sharp object such as a pencil or pen.
The P5521N is ready for setting and use.
Setting Time
1. Press and hold the CLOCK button and repeatedly press the WEEK button to set the current day.
2. Set the hours and minutes in a similar manner, by pressing HOUR or MINUTE respectively. You
can speed up setting by holding the buttons.
3. Releasing both the CLOCK and HOUR or MINUTE buttons saves the set value. To delete incor-
rectly entered values, simply repeat steps 1 to 3. If the screen still does not light up, press the
MASTER CLEAR button.
Programmes Settings
1. Press the TIMER button and release it – you can now set the activation of the rst time pro-
gramme (1_ON – activation).
2. Press the WEEK button to select the day or block of days in the week. Set the time for the 1_ON
programme using the HOUR and MINUTE buttons.
3. Press the TIMER button again – this ends the setting of the rst time programme (1_ON) and you
can repeat the process to set the 1_OFF (deactivation) time programme.
4. The TIMER button allows you to set up to 8 time programmes.
E.g.: TIMER ON at 18:15 and TIMER OFF at 22:15 every day.
a) press TIMER and “1_ON” will appear on the screen
b) press WEEK to set “MO,TU,WE,TH,FR,SA,SU”
c) press HOUR to set 18:00 or 6:00 PM
d) press MINUTE to set 18:15 or 6:15 PM
e) press TIMER “1_OFF”
f) repeat steps b to d except you set 22:15 or 10:15 PM as the time
3
Pressing the CLOCK button during programme setting returns you to the main menu at any time.
TIP: After trying out the set programmes, make sure the setting isn’t done in duplicate, especially if you
are setting the days in blocks.
Setting the ON/AUTO/OFF Function
1. Press the ON/AUTO/OFF button and choose from the three modes:
• MANUAL ON – the socket is always on.
• MANUAL OFF – the socket is always o.
• AUTO – the socket runs in accordance with the set programmes.
2. Switching from MANUAL to AUTO leaves the socket in the last setting from MANUAL mode (either
on or o) until reprogrammed.
12/24-Hour Mode
Press the CLOCK and TIMER buttons simultaneously and choose between 12- and 24-hour mode.
Daylight Saving Time
1. Press the CLOCK and ON/AUTO/OFF buttons simultaneously; “SUMMER” will appear on the screen
and the time will shift forward one hour.
2. Pressing the buttons again shifts the time back to its original state.
Reset Button
Pressing the RES/RCL button erases the currently set value, not the socket’s entire memory.
RANDOM Button
Only functional in AUTO mode; “RANDOM” will appear on the screen. With this function active, the con-
nected appliance is switched on randomly at ca. 0–32 min intervals from 18:00 to 6:00.
SAFETY WARNINGS
• If the screen isn’t working, plug the timer socket into a 230 V AC socket and let it charge – the screen
should light up in about 2 hours and the socket should be fully functional. To recharge fully, leave
it in the socket for approx. 12 hours.
• The device must only be connected to and used with 230 V AC (~)/50 Hz electrical wiring tted with
a protective contact in line with valid electrical regulations.
• Pay attention to the data on the type label of the appliances connected to the device. Maximum
input power of all connected electrical appliances must not exceed 3 680 W (max. current 16A).
Max. inductive load: 2 A.
• Make sure that the lead-in protective conductor is not disrupted – the life of the user may be en-
dangered if the protective conductor is disrupted.
• Do not plug the device into sockets with a circuit breaker rated higher than 16 A. The socket may only
be switched with a maximum inductive load of 2 A. Always make sure the plug from the connected
device is fully plugged into the socket.
• Do not leave the connected electrical appliances unattended.
• Never tamper with the electrical circuits of the device or disassemble it! If the device is damaged
or non-functional, contact the seller.
• When cleaning the timer socket, always unplug it from power rst. Then clean it using a dry cloth.
Do not use any cleaning agents or immerse the device in water!
• This appliance is not intended for use by persons (including children) whose physical, sensory or
mental disability or lack of experience and expertise prevents safe use, unless they are supervised
or instructed in the use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
• Any use of the device not listed in the previous sections of the manual will result in damage to the prod-
uct and could present danger in the form of a short circuit, injury by electric current, etc. The device
must not be modied or otherwise restructured! Safety warnings must be followed unconditionally.
• Use the timer socket in dry, indoor areas only.

Product specificaties

Merk: EMOS
Categorie: Niet gecategoriseerd
Model: P5521N

Heb je hulp nodig?

Als je hulp nodig hebt met EMOS P5521N stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd EMOS

EMOS

EMOS DCAZ10 Handleiding

16 November 2024
EMOS

EMOS ZV1161 Handleiding

14 November 2024
EMOS

EMOS DCTW14 Handleiding

24 September 2024
EMOS

EMOS DCFC18 Handleiding

16 Juli 2024
EMOS

EMOS DCLV15 Handleiding

16 Juli 2024
EMOS

EMOS DCFC19 Handleiding

16 Juli 2024
EMOS

EMOS DCLV14 Handleiding

16 Juli 2024
EMOS

EMOS DCTW13 Handleiding

16 Juli 2024
EMOS

EMOS DCZC03 Handleiding

16 Juli 2024
EMOS

EMOS DCTC02 Handleiding

16 Juli 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Kolcraft

Kolcraft MLB Chicago Cubs Handleiding

26 November 2024
Kolcraft

Kolcraft MLB New York Yankees Handleiding

26 November 2024
Kolcraft

Kolcraft MLB San Francisco Giants Handleiding

26 November 2024
Kolcraft

Kolcraft MLB St. Louis Cardinals Handleiding

26 November 2024
Nedis

Nedis POCO106 Handleiding

26 November 2024
Nedis

Nedis BTSM1GY Handleiding

26 November 2024
Turbosound

Turbosound TPOLEAJ-01 Handleiding

26 November 2024
Turbosound

Turbosound TSTAND-01 Handleiding

26 November 2024
IFM

IFM TAD981 Handleiding

26 November 2024
IFM

IFM TAD961 Handleiding

26 November 2024