EMOS M0503 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor EMOS M0503 (26 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/26
2206000030_31-M0503_00_01 96 × 140 mm
www.emos.eu
M0503
GB Infrared Thermometer
CZ Infrervený teploměr
SK Infrervený teplomer
PL Termometr bezdotykowy
napodczerwień
HU Infravörös hőmérő
SI Infrardeči termometer
RS|HR|BA|ME Infracrveni termometar
DE Infrarot-Thermometer
UA Інфрачервоний термометр
RO Termometru infraroșu
LT Infraraudonųjų spindulių termometras
LV Infrasarkanais termometrs
EE Infrapuna termomeeter
BG Инфрачервен термометър
4
Emissivity
Emissivity is the ratio between the emission intensity of the real object compared to the emission
intensity of a black body of the same temperature. Emissivity therefore expresses the capability
of a body to emit heat. For this thermometer, the emissivity for measured objects is set to 0.95.
If you measure shiny or polished objects, measurements may be inaccurate. In that case, we
recommend covering the object with some kind of packaging or painting it with a thin coat
of paint. Perform measurement once the packaging or paint reach the same temperature as
the covered object.
Screen Illumination
If you wish to activate screen illumination during measurement, press button no. 9; the
icon will appear.
Screen illumination switches o automatically after 10 seconds; press the illumination button
again to reactivate it.
Switching °C/°F Units of Temperature
While measuring, repeatedly press button no. 8 to switch between °C or °F units of temperature.
Battery Replacement
If the screen shows the icon, the battery is depleted; replace it.
Use alkaline batteries only; do not use re-chargeable batteries.
Upkeep and Maintenance
The product is designed to serve reliably for many years if used properly. Some advice for
proper operation:
Read the manual carefully before using this product.
Do not expose the product to direct sunlight, extreme cold and moisture, and sudden
changes in temperature. This would reduce accuracy of detection.
Do not place the product in locations prone to vibration and shocks these may cause
damage.
Do not expose the product to excessive force, impacts, dust, high temperatures or humidity
- these may cause malfunction, shorter battery life, damage to batteries and deformation
of plastic parts.
Do not expose the product to rain or high humidity, dropping or splashing water.
Do not place any open ame sources on the product, e.g. a lit candle, etc.
Do not place the product in places with inadequate air ow.
Do not tamper with the internal electric circuits of the product doing so may damage the
product, which will automatically void the warranty. The product should only be repaired
by a qualied professional.
To clean the device and laser lenses, use a slightly moistened soft cloth. Do not use
solvents or detergents they could scratch the plastic parts and cause corrosion of the
electric circuits.
Do not touch the lenses on the top of the device with your ngers.
Do not immerse the product in water or other liquids.
In the event of damage or defect on the product, do not perform any repairs by yourself.
Have it repaired where you purchased the product.
This device is not intended for use by persons (including children) whose physical, sensory
or mental disability or lack of experience and expertise prevents them from safely using the
device, if they are not supervised or if they have not been instructed regarding the use of
this appliance by a person responsible for their safety. It is necessary to supervise children
to ensure they do not play with the device.
5
Do not dispose with domestic waste. Use special collection points for sorted waste.
Contact local authorities for information about collection points. If the electronic devic-
es would be disposed on landll, dangerous substances may reach groundwater and
subsequently food chain, where it could aect human health.
Emos spol. s r. o. declares that the M0503 is in compliance with the essential requirements and
other relevant provisions of Directive. The device can be freely operated in the EU. The Declaration
of Conformity can be found at http://www.emos.eu/download.
CZ | Infračervený teplor
Infračervený teploměr je měřící přístroj k bezdotykovému měření teploty. Přístroj měří teplotu
na povrchu objektu. Určuje teplotu na základě infračervené energie, kterou objekt vyzařuje, a
na základě jeho ukazatele emisivity. Teploměr je ideální pro měření teploty horkých, nesnadno
přístupných nebo pohybujících se objektů.
Před použitím si nejdříve přečtěte tento návod.
Technické informace
Třída laseru: 2
Max. výstupní výkon: <1 mW
Vlnová délka: 650 nm
Optická charakteristika (poměr D:S): 8:1
Rozsah měření: -50 °C až 380 °C
Rozlišení teploty: 0,1 °C
Přesnost měření:
rozsah měření teploty přesnost
0 °C až 380 °C ±1,5 °C
-50 °C až 0 °C ±3 °C
Jednotky měření: °C/°F
Automatické vypnutí: po 20 sekundách od posledního stisku tlačítka
Provozní teplota: 0 °C až 40 °C
Provozní vlhkost: 10 % až 95 % RV
Napájení: 1× 9 V typ 6F22 (nejsou součástí)
Hmotnost: 131 g (bez baterie)
Rozměry: 40 × 100 × 160 mm
Popis teploměru
(viz obr. 1)
1 – Laserový zaměřov
2 – Infračervený senzor
3 – Spoušť
4 – Rukojeť – Bateriový prostor
5 – Bateriový kryt
6 – Displej
7 – Tlačítko aktivace/deaktivace laseru
8 – Tlačítko °C/°F
9 – Tlačítko podsvícení displeje
Popis displeje
(viz obr. 2)
10 Teplota
11 – Ikona HOLD
12 – Ikona SCAN
13 – Ikona laseru
14 – Ikona podsvícení displeje
15 – Ikona vybité baterie
16 – Ikona °C/°F


Product specificaties

Merk: EMOS
Categorie: Niet gecategoriseerd
Model: M0503

Heb je hulp nodig?

Als je hulp nodig hebt met EMOS M0503 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd EMOS

EMOS

EMOS DCAZ10 Handleiding

16 November 2024
EMOS

EMOS ZV1161 Handleiding

14 November 2024
EMOS

EMOS DCTW14 Handleiding

24 September 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd