Ematic Cube Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Ematic Cube (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Userā€™s Manual
Safety & Precautions
Pairing with Your DeviceCharging
Speaker Basics
Rugged Life Speaker
CUBE
ā€¢ Keep the speaker away from heat, direct
sunlight, and sharp edges.
ā€¢ Do not insert any metal object into the
device. Risk of short circuit!
ā€¢ Do not use the speaker in an extremely dry
climate to avoid static charge.
ā€¢ Do not attempt to repair the unit by
yourself. Contact an authorized specialist.
Note: Make sure the speaker is in power off
mode when trying to activate Bluetooth mode.
2. Turn on Bluetooth on your device. Search for
the device ā€œEmatic Cubeā€ and tap to connect.
4. You may have to enter a password on some
devices. Enter ā€œ0000ā€ as the password and
conļ¬rm it.
Note: The speaker will remain paired to your
device as long as the Bluetooth is on.
Connect the speaker with the USB cable to a
computer or charging port. The power button
will glow red while charging, and will turn off
when charging is complete.
Microphone
Power On / Off
Volume
Up
Volume
Down
In Bluetooth modeCharging Charging
Answer Call / End Call
Play / Pause
MicroUSB Port
1. When the speaker is off, hold the power
button for 3 seconds. The indicator light will
ļ¬‚ash blue to indicate the speaker is ready to
pair.
Troubleshooting
Button Controls Technical Speciļ¬cations Customer Support
ā€¢ Bluetooth 3.0
ā€¢ Transmission Frequency: 2.4GHz
ā€¢ IPX4 Water Resistance
ā€¢ Built-in 3.5V 400mAh Battery
ā€¢ Playing Time: About 6 hours
ā€¢ Charging Time: About 3 hours
ā€¢ Unit Weight: 0.2lbs
I canā€™t turn the
speaker on.
The battery is dead. Charge
the battery.
Check if bluetooth is on and
if your device is connected.
Please refer back to ā€œPairing
with Your Deviceā€.
An object is obstructing the
Bluetooth connection
between the speaker and
your device or they are too
far apart. The speaker must
be within 33 ft. of your device.
I canā€™t connect to the
speaker wirelessly.
Can I connect more than
one Bluetooth device?
I canā€™t connect to the
speaker via Bluetooth.
I hear crackling.
No, only one Bluetooth device
can be connected at a time .
Problem Solution
OR
Visit ematic.us/support for customer support
regarding your device.
To submit a request, ļ¬ll out the required information
online. You will be provided a ticket number
regarding your issue which you can refer to when
contacting us further.
Ā©2015 Ematic. All Rights Reserved. Bluetooth and the Bluetooth logo
are trademark of Bluetooth SIG, Inc and used by Ematic under a license.
1 Year warranty from the date of purchase, 90 days only on labor. This
device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.1 year
warranty from date of purchase, 90 days only on labor.
Power on or off.
Enter Bluetooth mode by holding
the power button for 3 seconds
while speaker is in off mode.
Press to turn down the volume.
Hold to go back to the previous track.
Press to turn up the volume.
Hold to go to the next track.
Press to play or pause.
Press to answer or end a call.
Press twice to redial the last phone call.


Product specificaties

Merk: Ematic
Categorie: Speaker
Model: Cube

Heb je hulp nodig?

Als je hulp nodig hebt met Ematic Cube stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Ematic

Ematic

Ematic ESB112X Handleiding

15 Februari 2024
Ematic

Ematic Cube Handleiding

15 Februari 2024
Ematic

Ematic ESB100 Handleiding

15 Februari 2024
Ematic

Ematic ESB106 Handleiding

15 Februari 2024
Ematic

Ematic Ripple Handleiding

14 Februari 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker