Elmo ESD-CC1 Handleiding

Elmo Niet gecategoriseerd ESD-CC1

Lees hieronder de 📖 handleiding in het Nederlandse voor Elmo ESD-CC1 (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/28
Multi-function
CCTV control keyboard
ESD-CC1
Users’ Manual
Version 3.0
The lightning flash with the arrowhead symbol,
within an equilateral triangle, is intended to alert the
user to the presence of uninsulated ’’dangerous
voltage’’ within the products enclosure that maybe
of sufficient magnitude to constitute a risk of electric
shock to persons.
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
WARNING!
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
The exclamation point, within an equilateral
triangle, is intended to alert the user to the
p
resence of important operating and
maintenance (servicing) instructions in the
literature accompanying the products.
!
WARNING!
This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions in this manual, may cause interference to radio communications. It has been
tested and found to comply with the limits for a Class A computing device pursuant to subpart J of part 15 o
f
FCC rules which are designed to provide reasonable protection against such interference when operated in a
commercial environment. This equipment has also been tested and found to comply with the requirements
for a CE Class A device safety standards.
Operation of this equipment in a residential area may cause interference, in which case the user is required to
take all measures are necessary, at the user’s expense, to correct the interference.
!
Table Of Contents
1. General Introduction……………………………………………………………………………4
2. Front Panel & Real Panel……………………………………………………………………….5
2.1 Front Panel………………………………………………………………………………….5
2.2 Rear Connector Panel……………………………………………………………………….6
2.3 Switch setting on rear connector PCB……………………………………………………... 6
3. Installation………………………………………………………………………………………7
3.1 RS485 cable………………………………………………………………………………...7
3.2 Cable connections…………………………………………………………………………..7
4. Operations………………………………………………………………………………………8
4.1 Power On…………………………………………………………………………………...8
4.2 Camera Control Mode……………………………………………………………………...8
4.2.1 OSD Camera Setting…………………………………………………………………..9
4.2.2 Joystick………………………………………………………………………………..9
4.2.3 Set Preset and Run Preset……………………………………………………………..9
4.2.4 Sequence setting and execution……………………………………………………….9
4.2.5 Auto-Pan……………………………………………………………………………..10
4.2.6 Cruise………………………………………………………………………………...11
4.2.7 Zoom/Focus Lens Control…………………………………………………………...12
4.2.8 Camera settings (All camera settings)……………………………………………12-15
4.3 System Setting Mode……………………………………………………………………...15
4.3.1 System Linking………………………………………………………………………16
4.3.2 Set Keyboard ID……………………………………………………………………..16
4.3.3 System Monitor Setting……………………………………………………………...16
4.3.4 RS-232 Baud Rate Setting…………………………………………………………...17
4.3.5 Date Setting…………………………………………………………………………..17
4.3.6 Time Setting………………………………………………………………………….17
4.3.7 System Date/Time Correction………………………………………………………..18
4.3.8 System Alarm List……………………………………………………………………18
4.3.9 Camera Type & Class………………………………………………………………...18
4.3.10 Key Press Beep……………………………………………………………………...19
4.3.11 Alarm Reaction……………………………………………………………………...19
4.3.12 Password Set………………………………………………………………………...19
4.4 Multiplexer Control………………………………………………………………………..19
4.5 The control and setting of Video Matrix Switcher………………………………………...19
5. Troubleshooting………………………………………………………………………………..20
Appendix A. RS485 Communication………………………………………………………………21
A.1 Connector (RJ-11 6P6C)…………………………………………………………………..21
A.2 ID Address Mapping………………………………………………………………………21
Appendix B. Technical Specifications……………………………………………………………...22
Appendix C. The Architecture of SuperMPX and SuperMMX………………………………...23-24
Appendix D. Commands Tree of Operating and Setting………………………………………..25-26
Appendix E. Software upgrade…………………………………………………………………….27

Product specificaties

Merk: Elmo
Categorie: Niet gecategoriseerd
Model: ESD-CC1

Heb je hulp nodig?

Als je hulp nodig hebt met Elmo ESD-CC1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Elmo

Elmo

Elmo HS-2 Handleiding

5 Augustus 2024
Elmo

Elmo TSN400A Handleiding

1 Augustus 2024
Elmo

Elmo CC431E Handleiding

31 Juli 2024
Elmo

Elmo EV-2000AF Handleiding

31 Juli 2024
Elmo

Elmo TSE270X Handleiding

31 Juli 2024
Elmo

Elmo PentaClass ABM Handleiding

31 Juli 2024
Elmo

Elmo PentaClass AB Handleiding

31 Juli 2024
Elmo

Elmo TT-02S Handleiding

31 Juli 2024
Elmo

Elmo PTC-401C IP Handleiding

31 Juli 2024
Elmo

Elmo LX-2200 Handleiding

31 Juli 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Xblitz

Xblitz R8 Power Charge Handleiding

3 December 2024
Xblitz

Xblitz R4 Power Handleiding

3 December 2024
Franke

Franke Urban UBG 610-78 Handleiding

3 December 2024
Franke

Franke ANX211RHD Handleiding

3 December 2024
Franke

Franke ANX220 Handleiding

3 December 2024
Dell

Dell NX3330 Handleiding

3 December 2024
Dell

Dell PowerConnect B-DCX-4s Handleiding

3 December 2024
Hager

Hager AKB83000701 Handleiding

3 December 2024
Hager

Hager AKB81500402 Handleiding

3 December 2024
Hager

Hager AKBA1500401V Handleiding

3 December 2024