Elite Screens M120H Handleiding

Elite Screens Printer M120H

Lees hieronder de 📖 handleiding in het Nederlandse voor Elite Screens M120H (1 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Manual B Series

QUICK USER’S GUIDE

080513- MB

S Installation Methods creen

A. Flush Wall Installation

1. Measure the distance of the keyholes on the end caps and mark the location of where

the screen is to be installed for the pre-drilled hole.

2. After marking the area and drilling the hole, insert the proper screw into the drilled

hole and leave about 1/8” of an inch from the wall to mount the screen.

3. s. Mount your screen from the keyhole located on back of screen’s left and right end cap

Note: Do not remove the end caps to mount the screen to the wall.

Removing the end caps will release the tension of the internal spring mechanism

Note: No hardware is included with this screen for installation. For wall mounting in drywall, drywall anchors and to

screws will suce to sustain the weight of this screen. For any other type of wall mounting, please consult with your

local hardware store to obtain the proper hardware.

B. Ceiling Installation

U-bolts included with Manual B-series for

hanging from the ceiling using chains and

S-hooks. (Chains and S-hooks not included)

Screen Operation

1. Pull the screen down from the lanyard or from the handle only at

a 90-degree angle. The screen is designed to lock at 2 inch intervals.

To achieve this, make sure to pull straight down and allowing the

screen to come up to lock into place. Do not attempt to pull the

screen down by the surface or touch the screen, as it will

damage the screen and void the warranty.

2. To retract the screen, simply pull the screen down more than 2

inches with a quick snap of the wrist and guide it back up in to the

housing without releasing the handle.

Attention: When retracting, always pull the screen down at a 90-degree angle and until the screen is entirely inside do not let go

the housing. If ever the screen feels stuck, keep in mind that the screen’s mechanism is new and needs to be run up/down a few

times to loosen up. If this happens, carefully, with a little force, yank the screen straight down to unlock the mechanism.

Ceiling Installation

Wall Installation

Keyhole located on

back of end cap.

Side view

Product specificaties

Merk:	Elite Screens
Categorie:	Printer
Model:	M120H
Kleur van het product:	Wit
Gebruikershandleiding:	Ja
Oorspronkelijke beeldverhouding:	16:9
Montagewijze:	Plafond/muur
Kleur behuizing:	Zwart
Certificering:	GREENGUARD
Gemakkelijk te installeren:	Ja
Kijkhoek:	160 °
Zichtbare schermhoogte (h):	1493.52 mm
Zichtbare schermbreedte (b):	2656.84 mm
Diagonaal:	120 "
Type aandrijving:	Gemotoriseerd
Schermgain:	1.1