Electro Harmonix EHX-202 Handleiding
Electro Harmonix
Audio tuner
EHX-202
Lees hieronder de 📖 handleiding in het Nederlandse voor Electro Harmonix EHX-202 (2 pagina's) in de categorie Audio tuner. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
EHX-2020 Chromatic Tuner Pedal
PRECAUTIONS
To avoid short circuit, electrical shock or malfunction:
•Do not disassemble for repair
•Do not place in high temperature and humid spaces, such as an electric heater, direct sunlight,
bathroom, wet floor, etc.
•Do not place in an area with excessive vibration
•Do no place in dusty or dirty space
•Do not operate with wet hands
To avoid breakdown:
•Do not handle the controls with excessive force
•Do not drop the tuner
Cleaning:
•Do not use paint thinner or alcohol for cleaning
•Use only dry and clean cloth
WELCOME
Congratulations on your purchase of the Electro-Harmonix EHX-2020 Chromatic Tuner Pedal, a
convenient and complete solution to tuning your instrument.
FEATURES & FUNCTIONS
1) Foot Switch: Pressing the Foot Switch will turn the tuner on/off.
2) Input Jack: Connect the cable from your instrument to the Input Jack of the tuner. When
powering the tuner from a battery, the Input Jack also functions as a power switch. Battery
power is engaged when a plug is inserted into the Input Jack. Power shuts off when the plug
is pulled out of the Input Jack. We recommend you remove the plug from the Input Jack
when you finish playing music.
3) DC 9V In Jack: If a DC adapter is used, you will be able to play without worrying about battery
life. The DC 9V Jack requires a power plug with dimensions of 5.5 x 2.1 (mm) and center-
negative polarity. The current draw at the DC 9V jack is xxmA.
4) Output Jack: Connect your amp or another effect unit to the Output Jack. When the tuner is
off, the Output Jack will output the signal of the instrument connected to the Input Jack.
When the tuner is on, no sound will be output from the Output Jack so you can tune silently.
5) Pitch Button: This button lets you change the reference frequency. 7-segment indication of 0
to 5 means 440-445Hz, and an indication of 6 to 9 means -439Hz.436
6) Flat Button: This button lets you use flat tunings.
Normal Tuning: Detuned ½ Note: Detuned 1 Full Note: Detuned 1 ½ Notes:
PROCEDURE
www.ehx.com
WARRANTY & NOTICES
Warranty Information
Please register online at http://ww w.ehx.com/product-registration.
Electro-Harmonix will repair or replace, at its discretion, a product
that fails to operate due to defects in materials or workmanship for
a period of one year from date of purchase. This applies only to
original purchasers who have bought their product from an
authorized Electro-Harmonix r etailer. Repaired or replaced units will
then be warranted for the unexpired portion of the original
warranty term. If you should need to return your unit for service
within the warranty period, please contact the appropriate office
listed below. Customers outside the regions listed below, please
contact EHX Customer Service for information on warranty repairs
at info@ehx.com or +1- - -8300. USA and Canadian 718 937
customers: please obtain a Return Authorization Number (RA#)
from EHX Customer Service before returning your product. Include,
with your returned unit, a written description of the problem as well
as your name, address, telephone number, e-mail address, RA# and
a copy of your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX c/o NEW SENSOR CORP.
47-50 33RD STREET LONG ISLAND CITY, NY 11101
Tel: 718- -937 8300
Email: info@ehx.com
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ UNITED KINGDOM
Tel: +44 179 247 3258
Email: electroharmonixuk@virginmedia.com
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and r eceiver.
• Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for
help.
Modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment under FCC rules.
The CE logo indicates that this product has been tested and shown
to conform with all applicable European Conformity directives.
Disposal: This symbol indicates that this product shall not be
treated as household waste. Instead it shall be disposed in
accordance with local environmental laws and guidelines and,
where as appropriate, handed over to the applicable collection
point for the recycling of electrical and electronic equipment. This
product was produced after Jan 1 2006.
1. Connect output of the instrument to the Input Jack of the tuner. The power will be turned on.
2. Press the Foot Switch to turn the tuner on.
3. Press the Pitch Button to select the reference frequency you want to use.
4. Press the Flat Button to select the reference flat you want to use.
5. Adjust the instrument until the tuning note you wished to tune is indicated.
6. Adjust the instrument slowly until the tuning guide reaches the center position.
7. When the center of the tuning guide lights up, the instrument is in tune.
SPECIFICATIONS
•True Bypass
•Tuning Range: B0-B7
•Accuracy: +/- 1cent
•Calibration: 436-445Hz (1 Hz step)
•Input: 1/4" Input Jack
•Output: 1/4" Output Jack
•Power: 9V DC Adapter
•Dimensions (mm): 46 x 94 x 50
•Weight: 260g
Product specificaties
| Merk: | Electro Harmonix |
| Categorie: | Audio tuner |
| Model: | EHX-202 |
Heb je hulp nodig?
Als je hulp nodig hebt met Electro Harmonix EHX-202 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Audio tuner Electro Harmonix
12 November 2024
Handleiding Audio tuner
- Audio tuner Sony
- Audio tuner Pioneer
- Audio tuner Albrecht
- Audio tuner Apart
- Audio tuner Arcam
- Audio tuner Denon
- Audio tuner Harman Kardon
- Audio tuner Luxman
- Audio tuner Marantz
- Audio tuner Monacor
- Audio tuner NAD
- Audio tuner Plantronics
- Audio tuner Pure
- Audio tuner Revox
- Audio tuner Rotel
- Audio tuner Sangean
- Audio tuner Sirius
- Audio tuner Soundmaster
- Audio tuner Teac
- Audio tuner Technics
- Audio tuner Telefunken
- Audio tuner Toa
- Audio tuner Cambridge
- Audio tuner McIntosh
- Audio tuner Vincent
- Audio tuner Conrad
- Audio tuner Quad
- Audio tuner Pro-Ject
- Audio tuner Crestron
- Audio tuner Adastra
- Audio tuner IMG Stage Line
Nieuwste handleidingen voor Audio tuner
4 April 2024
27 Februari 2024
22 Februari 2024
6 November 2023
8 Juli 2023
7 Juli 2023
4 Juli 2023
4 Juli 2023
3 Juli 2023
1 Juli 2023