Elba EAC-E2094I(WH) Handleiding

Elba Airconditioners EAC-E2094I(WH)

Lees hieronder de 📖 handleiding in het Nederlandse voor Elba EAC-E2094I(WH) (14 pagina's) in de categorie Airconditioners. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
2
SAFETY PRECAUTIONS
Keep this appliances out of reach from children. Do not let them to
operate the appliance without supervision.
To protect against the risk of electrical shock, do not immerse the
product, cord or plug into water or any other liquids.
This product is for household and indoor use only.
This product is not intended for use by person (including children)
with reduced physical, sensory or mental capabilities unless they
have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
If the power cord or plug is damaged, it must be replaced by the
service centre or a qualified person to avoid hazard.
Before installation, check if the mains supply voltage is matched
with the voltage stated on the rating plate on the product.
There is a risk of fire if cleaning is not carried out in accordance with
this instruction.
3
Make sure to have the authorized dealers or our service centre to carry out installation of the appliance.
1. The units are not to be installed at places where
there might be leakage of combustible gases.
Earth leakage-
circuit breaker
Make sure that the earth leakage-circuit breaker
is installed.
After the connecting of the wires between the indoor unit and the
outdoor unit, check whether the connection is loose or not by pulling
the wire with a little force.
The loose connection might result in fire hazard.
Make sure that the air conditioner is properly grounded.
The grounding wire on the air
conditi er should be tightly connectedon
to the ground of the power source.
Improper grounding might cause
electric shocks or other hazards.
S K
Do not ss, stretch, e, heatpre damag
or modify the power line.
It might cause electric shocks, overheating, fire
hazards, etc. If the power line wire is damaged or
needs to be replaced due to some other reasons,
please make re to have the aut ized servicesu hor
technician to do the replacement.
Never try to stop the operation of
the air conditioner by pulling out the
power supply line.
Such action might cause electric shocks
or fire hazards.
Do not connect the power supply line to an
int iate c ector. Use of ed werermed onn prolong po
line is strictly f en. Do no share the sameorbidd t
plug connector with other electric appliances.
It might cause electric shocks, overheating,
fire hazards or other accidents.
Do not rate the switch by wetope
hands.
It might cause electric shocks.
Before the connector is plugged
in, please make sure that there is
no dust on it and that it is plugged
fully in place
If there is dust on
the plug or if the
plug is not in place,
it might cause
electric shocks or
fire hazards.
copper
wire
Never use the fuse with incorrect
capacity or any other metal wires.
The use of metal or er es for fuse ghtcopp wir mi
cause operational failures or fire hazards.
In case that the leaked gas accumulates around the units, there
might occur the accident of fire hazards.
Absence of the earth leakage-circuit breaker might lead to electric
shock and some other hazards.
Wrong!
Instructions for Installation
Instructions for Operation


Product specificaties

Merk: Elba
Categorie: Airconditioners
Model: EAC-E2094I(WH)

Heb je hulp nodig?

Als je hulp nodig hebt met Elba EAC-E2094I(WH) stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Airconditioners Elba

Handleiding Airconditioners

Nieuwste handleidingen voor Airconditioners