Elan Piatt 83248 Handleiding

Elan Verlichting Piatt 83248

Lees hieronder de đź“– handleiding in het Nederlandse voor Elan Piatt 83248 (18 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18
Français p. 10
MODEL #83248
RECTANGULAR PENDANT
1
Questions, problems, missing parts? Before returning to your retailer, call our
customer service department at , 8 a.m. - 4 p.m., EST, Monday - Friday. 1-855-226-7169
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
PACKAGE CONTENTS
2
A
9 Inch Hanging Ball
11 Inch Large Hanging Ball
11 Inch Small Hanging Ball
13 Inch Hanging Ball
15 Inch Hanging Ball
7 Inch Hanging Ball
8 Inch Hanging Ball
10 Inch Large Hanging Ball
10 Inch Small Hanging Ball
16 Inch Hanging Ball
6 Inch Threaded Pipe
B
C
D
E
F
G
H
I
J
K
4
4
4
4
2
12
2
2
2
1
4
PART DESCRIPTION QTY
L
12 Inch Threaded Pipe
Fixture Loop
Threaded Nipple
Chain Link
Canopy
Wire Loop
40-Watt G9 bulb
Hanging Clip
Threaded Socket
Bulb Cover
M
N
O
P
Q
R
S
T
U
4
2
2
2
1
37
6
37
6
6
PART DESCRIPTION QTY
ABB C DEF G H I J
U
S
T
R
K
O
L
N
M
P
Q
Note: The hanging balls are located in the bottom
compartment of the styrofoam container.
3
HARDWARE CONTENTS
CAUTION
• Read and understand all instructions and illustrations completely before proceeding with assembly
and installation of this xture.
• If you have any doubts about how to install this lighting xture, or if the xture fails to operate
completely, please contact a licensed electrical contractor.
• All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts
out, or use any parts that are worn out or broken. Failure to obey this instruction could invalidate
the ETL listing and/or C.S.A. certication of this xture.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated assembly time: 30 minutes to 1 hour
Tools Required for Assembly (not included): Phillips screwdriver, î‹Šathead screwdriver, wire strippers,
electrical tape, ladder, safety glasses, drill and 9/32 drill bit.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
• IMPORTANT: NEVER attempt any work without shutting off the electricity.
• Go to the main fuse box, or circuit breaker, in your home. Place the main power switch in the “OFF”
position and unscrew the fuse(s), or switch “OFF” the circuit breaker switch(es), that control the power
to the xture or room that you are working on.
• Place the wall switch in the "OFF" position. If the xture to be replaced has a switch or pull chain,
place it in the "OFF" position.
• Do not use bulbs with wattage greater than specied on this xture.
• WARNING: California Prop. 65: This lighting xture contains chemicals known to the state of California
to cause cancer, birth defects, and/or other reproductive harm. Wash hands after use.
Short
Machine
Screws
BB
Mounting
Bracket
Ground
Screw
DD EE
Threaded
Knobs
FF
Long
Machine
Screws
CC
Qty: 2
Qty: 2
Qty: 1
Qty: 1
Wire
Connectors
AA
Qty: 3 Qty: 2


Product specificaties

Merk: Elan
Categorie: Verlichting
Model: Piatt 83248

Heb je hulp nodig?

Als je hulp nodig hebt met Elan Piatt 83248 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Verlichting Elan

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting