Edifier STAX SPIRIT S10 Handleiding

Edifier Oordopje STAX SPIRIT S10

Lees hieronder de 📖 handleiding in het Nederlandse voor Edifier STAX SPIRIT S10 (7 pagina's) in de categorie Oordopje. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
EN 1. Power ON/OFF
2. First pairing
3. Pairing for new device
6. Charging
7. Controls
Manual
4. Dual-device connection
5. Reset
Input: 5V 200mA(Earbuds) 5V 1A(Charging case)
Note: Please do not charge the earbuds when there is sweat or other
liquids inside the charging po, which may damage the earbuds.
Note:
1. Default sound control: High noise cancellation / Ambient sound /
Noise cancellation o.
2. Images are for illustrative purposes only and may dier from the
actual product.
3. "—" Press and hold.
Open or close the case to power on/o.
Power on and then select "EDIFIER STAX SPIRIT S10" in your device
setting to connect.
1. In ON state, press and hold the button on the case for about 3s.
2. Select "EDIFIER STAX SPIRIT S10" in your device setting to connect.
Note: For subsequent use, the earbuds will automatically connect to
the device used last time.
1. Pair device A with the earbuds and don't take the earbuds out.
2. Re-enter Bluetooth pairing and select "EDIFIER STAX SPIRIT S10"
in device B setting to connect.
3. Select "EDIFIER STAX SPIRIT S10" in device A setting to connect
manually.
1. Place the earbuds in the case and keep it open.
2. Press the button on the case 3 times, white LED blinks until the
reset is complete, then the earbuds will automatically enter
Bluetooth pairing.
True Wireless Planar Magnetic Earbuds with Active Noise Cancellation
Model: EDF200137
EDIFIER STAX SPIRIT S10
Bluetooth
EDIFIER STAX SPIRIT S10
Bluetooth
EDIFIER STAX SPIRIT S10
Bluetooth
EDIFIER STAX SPIRIT S10
Bluetooth
AB
1
3
A
x3
x
x2
x3
x2
x3
x1 x1
7. Commandes
4. Connexion double appareils
1. Associez l’appareil A aux écouteurs et ne soez pas les écouteurs.
2. Revenez au mode d'association Bluetooth et sélectionnez
« EDIFIER STAX SPIRIT S10 » dans les paramètres de l'appareil B
pour vous connecter.
3. Sélectionnez « EDIFIER STAX SPIRIT S10 » dans les paramètres de
l'appareil A pour une connexion manuelle.
6. Charger
Entrée: 5V 200mA(Écouteurs) 5V 1A(Étui-chargeur)
Remarque : Veuillez ne pas charger les écouteurs si de la sueur ou
autres liquides sont présents dans le po de charge, ce qui peut
endommager les écouteurs.
Remarque :
1. Commande du son par défaut : Atténuation élevée du bruit / Son
ambiant / Atténuation du bruit désactivée.
2. Les images utilisées seent de référence uniquement, et peuvent
ne pas correspondre au produit.
3. "—" Maintenir enfoncé.
FR 1. Allumer/Éteindre
2. Première association
3. Association pour un nouvel appareil
5. Réinitialiser
Ouvrez ou fermez l’étui pour allumer/éteindre.
Allumez et sélectionnez « EDIFIER STAX SPIRIT S10 » dans les
paramètres de votre appareil pour établir la connexion.
1. En mode allumé, maintenez le bouton sur l’étui appuyé pendant
environ 3 s.
2. Sélectionnez « EDIFIER STAX SPIRIT S10 » dans les paramètres de
votre appareil pour vous connecter.
Remarque : Les écouteurs se connecteront automatiquement au
dernier appareil associé lorsque vous les allumerez dans le futur.
1. Placez les écouteurs dans l’étui et laissez-le ouve.
2. Appuyez 3 fois sur le bouton de l'étui pour terminer de rétablir les
paramètres d'usine.
EDIFIER STAX SPIRIT S10
Bluetooth
EDIFIER STAX SPIRIT S10
Bluetooth
EDIFIER STAX SPIRIT S10
Bluetooth
EDIFIER STAX SPIRIT S10
Bluetooth
AB
1
3
A
x3
x
x2
x3
x2
x3
x1 x1
4. Conexión a dos dispositivos
1. Empareje el dispositivo A con los auriculares y no saque los
auriculares.
2. Vuelva a acceder al emparejamiento Bluetooth y seleccione
"EDIFIER STAX SPIRIT S10" en la conguración del dispositivo B
para conectar.
3. Seleccione "EDIFIER STAX SPIRIT S10" en la conguración del
dispositivo A para conectar manualmente.
6. Carga
7. Controles
1. Ponga los auriculares en el estuche y manténgalo abieo.
2. Pulse el botón en la funda 3 veces para nalizar el restablecimiento
de fábrica.
Entrada: 5V 200mA(Auriculares) 5V 1A(Estuche de carga)
Nota: No cargue el auriculares cuando haya sudor u otros líquidos
en el pueo de carga, podría dañar los auriculares.
Nota:
1. Control de sonido predeterminado: Cancelación de ruido alta /
Sonido ambiente / Cancelación de ruido apagada.
2. Las imágenes aparecen con un n meramente ilustrativo y pueden
variar del producto nal.
3. "—" Presionar y mantener.
ES 1. Encendido/Apagado
2. Primer emparejamiento
3. Emparejamiento para dispositivo nuevo
5. Restablecer
Abra o cierre el estuche para encender o apagar.
Encienda y seleccione "EDIFIER STAX SPIRIT S10" en la conguración
de su dispositivo para conectar.
1. En estado ENCENDIDO, Mantenga pulsado el botón de la funda
aproximadamente 3s.
2. Seleccione "EDIFIER STAX SPIRIT S10" en la conguración de su
dispositivo para conectar.
Nota: Para usos posteriores, los auriculares se conectarán
automáticamente al último dispositivo usado.
EDIFIER STAX SPIRIT S10
Bluetooth
EDIFIER STAX SPIRIT S10
Bluetooth
EDIFIER STAX SPIRIT S10
Bluetooth
EDIFIER STAX SPIRIT S10
Bluetooth
AB
1
3
A
x3
x
x2
x3
x2
x3
x1 x1


Product specificaties

Merk: Edifier
Categorie: Oordopje
Model: STAX SPIRIT S10

Heb je hulp nodig?

Als je hulp nodig hebt met Edifier STAX SPIRIT S10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Oordopje Edifier

Handleiding Oordopje

Nieuwste handleidingen voor Oordopje