Edifier AirPulse A300 Pro Handleiding

Edifier Home cinema set AirPulse A300 Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor Edifier AirPulse A300 Pro (22 pagina's) in de categorie Home cinema set. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/22
A300Pro
OPT COAX
AUX
BASS TREBLE
Active Speaker Systems
Dongguan Planum Audio Systems Co., LTD
No. 2 East Industry Road, Songshan Lake Naonal High-tech
Industrial Development Zone, Dongguan 523808 China
www.airpulseaudio.com
Printed in China User manual Mode d'emploi
1 2
WARNING! The unit is of Class l construcon and must be connected to a mains socket outlet with
a protecve earthing connecon. Where the mains plug is used as the disconnect device, the
disconnect device shall remain
readily operable.
Please read the following contents carefully before turning on your equipment; and follow the
instrucons below.
Keep this informaon around for future reference.
Important safety instrucon
Warning:
1. Use the same type of baery only to replace baery in remote control.
2. Never disassemble, smash, or compress baery inside remote control; or toss it into a fire.
3. Please stop using the remote control if it has the appearance of bulging, leaking, discoloring
or any other abnormal symptoms. Improper use of baery can cause explosion or leaking
which leads to burn or other bodily injury. Please dispose baery by referring to local legislaon.
Excessively loud music may lead to hearing loss. Please keep the volume in a safe range.
Power warning:
1. Place the product near the power outlet for easy use.
2. Before use, make sure that the operang voltage is the same as your local power supply. Correct
operang voltage can be found on the product plate.
3.
For safety purpose, unplug the product during lightning storms or when unused for extended
periods
of me.
4.
Under normal condions, the power supply may get hot. Please keep good venlaon in the
area and
exercise cauon.
5. Safety warning labels on the housing or boom of the product or power adaptor.
Important safety instrucon
This symbol is to alert the user to the presence of un-insulated dangerous voltage within
the product's enclosure that may be of sufficient magnitude to constute a risk of electric
shock to persons.
This symbol is to warn the user not to disassemble the enclosure of the product and there
is no user-replaceable part inside. Take the product to an authorized service center for
repair.
This symbol indicates that the product is for indoor use only.
For wireless product:
1. Wireless product may generate shortwave radio frequencies and interfere with the normal
use of other electronic devices or medical equipment.
2. Turn off the product when its disallowed. Do not use the product in medical facilies, on
airplane, at gas staons, near automac gates, automacre alarm system or other automated
devices.
3. Do not use the product in the vicinity of a pacemaker within a 20cm range. The radio waves
may affect the normal operaon of the pacemaker or other medical devices.
Correct Disposal of this product. This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, recycle it responsibly
to promote the sustainable reuse of material resources. To return your used device,
please use the return and collecon systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the speakers. When a cart is used, use cauon when moving the cart/speakers combinaon to
avoid injury from p-over.
1. Please read the instrucons carefully. Keep it in safe place for future reference
2. Heed all warnings.
3. Follow all instrucons.
4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including produce heat.amplifiers) that
5. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
6. Protect the power cord from being walked on or pinched parcularly at plugs, convenience
receptacles, and the point where they exit from the speaker.
7. Only use aachments/accessories specified by the manufacturer.
8. Unplug this speaker during lightning storms or when unused for long periods of me.
9. Before connecng speakers to power source, please turn off the power switch and make sure
the volume is set at minimum level.
10. Please do not place power cable and signal cable near heat source (such as electric heater
and radiator).
Do not leave cables where they can easily be stepped on or compressed.
11. Use electric outlets that allow power cable be pulled out easily. When speakers are not being
used for an extended period of me, please turn off power switch and disconnect power plug.
12. In order to avoid damage from thunder and lightning, turn off power switch and disconnect
speaker from power source during a rain storm.
13. Please do not drag power cable when disconnecng from wall socket. Hold power cord firmly
at the top to unplug from the wall socket.
14. Use the speakers only within voltage specificaons. Using the speakers with voltage higher than
specificaons is dangerous and can cause equipment damage, fire damage or bodily injury.
15. These speakers do not include any self serviceable parts. Do not aempt to open the speaker
to uninstall any parts or do any type of modificaons. If problems occur during use please
contact professional technicians only for repair.
16. Please refer to the trouble shoong secon in owner’s manual for common operaon errors
and to determine possible malfuncon.
17. Please do not place speakers in places where they can be easily hit by falling objects or dropping
and splashing liquid. Do not place any lit fire (such as candle) on top of speaker as this may
lead to re hazard.
Do not place any liquid containers on top of speaker as this may fall on speakers and causing
electric shock and damage to speaker.
18. Place speakers in a stable posion so they will not easily fall off causing damage and injury.
19. Place speakers in a well venlated and dry posion, far from direct sunlight, heat source,
vibraon, dust, moist or extremely cold condion. For opmal performance, please leave at
least 20 cm distance space around the speaker.
20. Please do not use speaker at maximum volume for an extended period of me, This may cause
damage to your hearing.
21. Before moving the speakers, please first turn off power switch and disconnect from power
source.
22. When the following symptoms occur, please turn off power switch and disconnect from
power source:
‒ Power cable or plug is worn or damaged.
‒ Abnormal odor or smoke is detected.
‒ Small objects falling inside the speaker.
‒ Sudden break off while playing music.
Consult a professional repair technician to diagnose and repair the speaker.
23. Do not use chemical solvent to clean the surface of speaker. To avoid surface damage, use
a clean and so cloth only.
24. Do not use the speakers in proximity closer than 22 cm to individuals wearing cardiac pacemaker
or defibrillator.
English
English
34
The statements for 5.8G module:
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two
condions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operaon.
Changes or modificaons do not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Please noce that if the FCC idencaon number is not visible when the module is installed
inside another device, then the outside of the device into which the module is installed must
also display a label referring to the enclosed module. This exterior label can use wording such
as the following: "Contains FCC ID: Z9G-EDF24" any similar wording that expresses the same
meaning may be used.
This equipment complies with FCC radiaon exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body. This transmier must not be co-located or operang
in conjuncon with any other antenna or transmier.
The module is limited to OEM installaon ONLY.
English
Important safety instrucon
The OEM integrator is responsible for ensuring that the end-user has no manual instrucon to
remove or install module.
The module is limited to installaon in mobile applicaon;
A separate approval is required for all other operang configuraons, including portable
configuraons with respect to Part 2.1093 and difference antenna configuraons.
There is requirement that the grantee provide guidance to the host manufacturer for compliance
with Part 15B requirements.
This device contains licence-exempt transmier(s)/receiver(s) that comply with Innovaon,
Science and Economic Development Canada’s licence-exempt RSS(s). Operaon is subject to the
following two condions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operaon of the device.
ISED Regulatory compliance
This device contains licence-exempt transmiers that comply with Innovaon, Science and Economic
Development Canada’s licence-exempt RSS(s).
Operaon is subject to the following two condions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operaon
of the device.
L’émeeur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovaon,
Sciences et veloppement économique Canada applicables aux appareils radio exempts de licence.
L’exploitaon est autorisée aux deux condions suivantes :
L’appareil ne doit pas produire de brouillage;
L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est suscepble
d’en compromere le fonconnement.
This equipment complies with IC RSS-102 radiaon exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with minimum distance 20cm between the
radiator and your body.
Cet équipement est conforme aux limites d'exposion aux radiaons IC CNR-102 établies pour
un environnement non contrôlé. Cetéquipement doit être installé et ulisé avec une distance
minimale de 20 cm entre le radiateur et votre corps.
FCC Regulatory Compliance
Warning: changes or modificaons not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protecon against harmful interference in a residenal installaon. This equipment generates,
uses and can radiate are designed to provide reasonable protecon against harmful interference
in a residenal installaon.
However, there is no guarantee that interference will not occur in a parcular installaon.
If this equipment does cause harmful interference to radio or television recepon, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separaon between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Compliance
This equipment complies with FCC radiaon exposure limits set forth for an uncontrolled environment.
This equipment should beinstalled and operated with minimum distance 20cm between the
radiator and your body. This transmier must not be co-located or operang in conjuncon with
any other with minimum distance 20cm between the radiator and your body. This transmier
must not be co-located or operang in conjuncon with any other antenna or transmier.
Important safety instrucon
English


Product specificaties

Merk: Edifier
Categorie: Home cinema set
Model: AirPulse A300 Pro
Kleur van het product: Black,Wood colour
Gewicht: 24300 g
Breedte: 225 mm
Diepte: 350 mm
Hoogte: 385 mm
Bluetooth: Ja
Aan/uitschakelaar: Ja
Bluetooth-versie: 5.0
Connectiviteitstechnologie: Bedraad en draadloos
Type stroombron: AC
Gemiddeld vermogen: 260 W
Volumeregeling: Draaiknop
Ingang stroom: Ja
Aanbevolen gebruik: Universeel
USB-aansluiting: Ja
Audio-uitgangskanalen: 2.0 kanalen
Speaker plaatsing: Stand-mountable,Tabletop/bookshelf
Aantal drivers: 2
Woofer: Ja
Frequentiebereik: 40 - 40000 Hz
Op afstand bedienbaar: Ja
Signaal/ruis-verhouding: 90 dB
AUX ingang: Ja
Versterker: Ingebouwd
Aantal tweeter drivers: 1
Aantal mid-range drivers: 1
Diameter mid-range driver: 6.5 "
XLR in: Ja
Tweeter: Ja
AC-ingangsspanning: 100 - 240 V
AC-ingangsfrequentie: 50 - 60 Hz
Audio RCA-ingangen: 3

Heb je hulp nodig?

Als je hulp nodig hebt met Edifier AirPulse A300 Pro stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Home cinema set Edifier

Handleiding Home cinema set

Nieuwste handleidingen voor Home cinema set