ECS GLKD-I2 Handleiding

ECS Moederbord GLKD-I2

Lees hieronder de 📖 handleiding in het Nederlandse voor ECS GLKD-I2 (22 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/22
GLKD-I2 USER MANUAL
The information in this document is subject to change without notice. The
manufacturer makes no representations or warranties with respect to the contents
hereof and specifically disclaims any implied warranties of merchantability or
fitness for any particular purpose. The manufacturer reserves the right to revise this
publication and to make changes from time to time in the content hereof without
obligation of the manufacturer to notify any person of such revision or changes.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna
•Increase the separation between the equipment and the receiver
•Connect the equipment onto an outlet on a circuit different from that to
which the receiver is connected
•Consult the dealer or an experienced radio/TV technician for help
Shielded interconnect cables and a shielded AC power cable must be employed with
this equipment to ensure compliance with the pertinent RF emission limits
governing this device. Changes or modifications not expressly approved by the
system’s manufacturer could void the user’s authority to operate the equipment.
Federal Communications Commission (FCC)
Disclaimer
Declaration of Conformity
This device complies with part 15 of the FCC rules. Operation is subject to the follow-
ing conditions:
•This device may not cause harmful interference.
•This device must accept any interference received, including interference
that may cause undesired operation.
Electromagnetic compatibility of multimedia equipment - Emission
requirements
EN 55032
EN 61000-3-2 Electromagnetic Compatibility(EMC)
Part 3-2: Limits-Limits for harmonic current emissions (equipment input
current 16A per phase)
EN 61000-3-3 Electromagnetic Compatibility(EMC)
Part 3-3: Limits-Limitation of voltage changes, voltage fluctuations and flicker
in public low-voltage supply systems, for equipment with rated current 16A
per phase and not subject to conditional connection
EN 55024 Information technology equipment-Immunity characteristics-Limits and
methods of measurement
EN 60950 Safety for information technology equipment including electrical business
equipment
CE marking






This device is in conformity with the following EC/EMC directives:
ii
GLKD-I2 USER MANUAL
TABLE OF CONTENTS
Preface i
Brief Introduction 1
Specifications......................................................................................1
Motherboard Components................................................................3
Header Pin Definition and Jumper Settings.........................................5
I/O Ports...............................................................................................7
Multi-language Quick Installation Guide 9
English...................................................................................................9
Simplified Chinese...............................................................................11
Korean......................................................................................................13
Indonesian.............................................................................................15
Japanese................................................................................................17
Vietnamese..........................................................................................19
GLKD-I2 USER MANUAL
1
Brief Introduction
Specifications
SoC
• Single channel DDR4 SO-DIMM memory architecture
• 1 x 228-pin DDR4 SO-DIMM socket supports up to 8 GB
• Supports DDR4 2400 MHz SDRAM
Memory
• 1 x M.2 slot (Socket 3 key A/E 2230 for WiFi/BT supports
CNVi)
• Supported by Intel® Gemini Lake 1090 BGA 14nm
- 2 x Serial ATA 6Gb/s devices
Expansion
Slots
Storage
Rear Panel I/O
LAN • Realtek RTL8111H Gigabit LAN
• Realtek ALC662-VD0-GR 6CH HD Audio CODEC
- 6-Channel High Definition Audio Codec
- Compliant with HD audio specification
Audio
• Onboard Intel® Gemini Lake 1090 BGA 14nm
• 1 x 24-pin ATX Power Supply connector
• 1 x 4-pin SYS_FAN connector
• 2 x USB 2.0 headers support additional four USB 2.0 ports
• 2 x Serial ATA 6Gb/s connectors
• 2 x COM headers
• 1 x Buzzer
• 1 x Front Panel switch/LED header
• 1 x Front Panel audio header
• 1 x Clear CMOS jumper
• 1 x Case open header
• 1 x Printer header
Internal I/O
Connectors &
Headers
Note: Please go to our website for the latest Memory support list.
• 1 x PS/2 Keyboard & PS/2 Mouse connectors
• 4 x USB 3.0 ports
• 1 x RJ45 LAN connector
• 2 x USB 2.0 ports
• 1 x HDMI port
• 1 x D-sub (VGA) port*(or DP port)
• 1 x Audio port (1 x line-in, 1 x line-out, 1 x Microphone)
Note: * VGA port (rear panel I/O) and DP port (rear panel I/O) are alternative
options of the motherboard.


Product specificaties

Merk: ECS
Categorie: Moederbord
Model: GLKD-I2

Heb je hulp nodig?

Als je hulp nodig hebt met ECS GLKD-I2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden