Easypix V912 Handleiding

Easypix Fotocamera V912

Lees hieronder de 📖 handleiding in het Nederlandse voor Easypix V912 (3 pagina's) in de categorie Fotocamera. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/3
Manual
1. Get to know your camera
9.0 Mega pixels resolution sensor
Digital still camera
Digital video camcorder
Built-in flash Light
8x digital zoom
2.7" TFT color display
Micro SD card support
2xAAA alkaline batteries
Smile detection
Anti-shaking still capture
2. Functional parts
1 Shutter Press this button to take photographs or to start /stop recording
a video clip,or to confirm changes in menu mode.
2 Power on/off button
Press this button to turn on, press again to turn off.
3 Strap hook Hook for attaching the wrist strap to the camera.
4 Busy indicator When the indicator is blinking,the camera is busy
5 Lens
Records the image to be taken.
Note: Keep the lens clean. Dirt and fingerprints will affect the
quality of the picture.
6 Flash light
Use the built-in flash to give the subject extra lighting if it is in
dark surrounding the best flash distance is recommended within （
1.5m).
7 Macro switch
Select this mode to take close-up Macro mode:
photographs (distance 11cm - 18cm).
Normal mode: Select this mode to take photographs from
0.5m - infinity.
8 LCD screen Display photographs, video clips, camera setting and menu.
9 Up Up & Digital zoom in.
10 Down Down & Digital zoom out.
11 Left / Flash light For LEFT selection in menu mode.
For flash light function selection in photo mode.
12 Right / Playback For RIGHT selection in menu mode.
Press it to enter playback mode.
13 Mode Press it to select PHOTO/VIDEO mode.
14 Menu / Delete Press it to enter camera setting mode.
Press it to delete the photos/videos in playback mode.
15 Tripod connector To fix the camera on tripod.
16 USB interface Via this connection, you can download photographs and video
clips to a computer.
17 Micro SD card slot Micro SD card storage location.
18 Battery door Door for battery.
3. Explanation of the status icons
Item Function Description
1 Mode selected
Photographs mode.
Videos capture mode.
Photo playback mode.
Video playback mode.
2 Flash indicator
Force flash: The flash is on in any environment.
Auto flash: The camera determines if
the flash should be used or not.
No flash : The flash is turned off.
3 Self-timer 10s Timer
4 ISO Sensitivity select.
5 Photo/Video
counter
Photo mode: No. of pictures had been taken.
Video mode: Recording time in second.
Playback mode: No. of pictures or video file.
6 Selected resolution
12M = 4032x3024; 9M=3456x2592
5M = 2560x1920; 3M = 2048x1536;
1.3M = 1280x960; VGA = 640x480
7 Picture quality
Super fine.
Fine.
Normal.
8 SD card indication The SD card is inserted and will be used as storage for
PHOTO and VIDEO
9 Brightness
alert-anti-shaking Alert user to hold the camera steadily.-on/off
10 Normal/Macro
mode indicator
Mode (0.5m – infinity).
Macro mode (11cm – 18cm).
11 Battery indicator The batteries are full.
The batteries are empty.
12 Exposure value Show EV value. ±
13 White Balance White balance selection.
14 Scene mode Landscape/Backlight/Night scene/Portrait/Sports/auto
15 Smile detection On/Off
16 Zoom indicator Showing zoom ratio.
4. Details for camera setting
capture Mode Single / 10s Timer Single or 10s timer selection
12M pixel resolution 4032 x 3024
9.0M pixel resolution 3456 x 2592
5.0M pixel resolution 2560 x 1920
3.0M pixel resolution 2048 x 1536
1.3M pixel resolution 1280 x 960
Resolution
VGA resolution 640 x 480
Quality Super Fine/Fine/Normal Picture quality setting
SET
Still
Sharpness Strong/Normal/Soft Sharpness setting
Exposure ±2,±5/3,±4/3,±1,
±2/3,±1/3,0
Exposure setting
Auto Automatic white balance
Daylight White balance selected for daylight
surrounding
Cloudy White balance selected for cloudy
surrounding
Tungsten White balance selected for tungsten
lighting
White balance
Fluorescent White balance selected for
fluorescent surrounding
Scene
Auto/Landscape/
Backlight/Night
scene/Portrait/Sports
Scene setting
ISO Auto/50/100/200 Sensitivity select
Smile detection On / Off Smile detection setting
Anti-shaking On / Off Anti-shaking setting
Video
Resolution VGA 640 x 480
QVGA 320 x 240 Video resolution set up
Date/Time YY/MM/DD Date or time setting
Auto power off Off / 1Minute / 3 Minutes Auto power off selection
Beep sound Off/On Beep sound setting
Language
English/T-Chinese/
S-Chinese/French/
Deutsch/Italian/Spanish/
Portuguese/Japanese/Ned
erlands
Select display language
Date stamp Date &Time /Date /Off Date stamp
Frequency 50Hz / 60Hz Select power frequency in your
location
Format Internal Memory/
SD card
Format the memory location
selection.
Default setting Cancel / OK Default setting
Setup
Version See the firmware version
Note: The camera will remain the last setting when it is turned off.
5. Using the camera
5.1 Installing the batteries
1.
Open the battery door.
2. Insert 2xAAA alkaline batteries into the camera.
3. Close the battery door.
5.2 Inserting a memory card (not included)
This camera has built-in internal memory. This memory can be extended with a micro SD memory
card (not included).
Follow the instructions given below to insert the optional micro SD memory card into the camera.
1. Turn off the camera first.
2. Open the card bar.
3. Insert the micro SD card into the camera.
Note: There is only one right direction to insert the micro SD memory card into the slot. Do not
force the card into the slot, or else it may damage both the camera and the micro SD
memory card.
Note: The micro SD memory card must be formatted before taking photographs. See the
following sections for more information.
5.3 Formatting the memory or micro SD card
1. Press the menu button ( ) in PHOTO or VIDEO mode.
2. Select the setup mode by press the right button.
3. Select the format icon by press the
W
( ) button and press the SHUTTER button to
confirm.
4. Select Internal memory / SD card then press the SHUTTER button.
5.4 Setting the resolution
The camera can be set to different resolutions.
1. Press the menu button ( ) in PHOTO mode, select the resolutions icon by
W
( ) key
and press the SHUTTER to confirm.
Resolutions: VGA (640 x 480), 1.3M (1280 x 960), 3M (2048 x 1536),
5M (2560 x 1920), 9M (3456x2592), 12M (4032 x 3024)
2. Six different resolutions will be displayed. Select the desired resolution by using the up or
down buttons and press the SHUTTER button to confirm the selection.
5.5 Taking photographs
1. Turn on the camera.
2.
Depending on the distance to the object being photographed, use macro switch to adjust
the distance. Select the flower symbol ( ) if you wish to take a close-up photograph
(11cm –18cm).
If you wish to take video or photograph of surroundings or people (0.5m – infinity),set the
macro switch to normal mode ( ).
3. If you are not sure if there is enough lighting, turn the automatic flash( ) on by pressing
the flash button. (If the battery power is too low, the flash won’t be activated).
4. Use the LCD screen to aim the object you wish to take photograph.
Use the face detection to aim the people you wish to take photograph.
5. Press SHUTTER button and wait until the LCD display turn on again.
6. If ‘SMILE’ detection is ON, shutter will be activate automatically once a smile face is
detected
Caution: 1) Taking picture for fast-moving object is not recommended.
2) Image may be distorted when taking picture in a moving vehicle.
5.6 Zoom in and out
The camera can zoom in up to 8 times.
Zoom in or out by pressing the up or down button, a number will appear on the display, 8.x is the
maximum zoom ratio.
5.7 Self-timer setting
You can use the self-timer function when you wish to take a photograph for yourself or when you
wish to take a photograph for an object which the camera must be as still as possible.
1. Set the camera to photo mode.
2. Press the MENU button ( ). The menu will appear.
3. Press the
W
( ) button to select Capture Mode and confirm by pressing the SHUTTER
button.
4. Press the
W
( ) button to set the delay time: 10S Timer.
5. Press the SHUTTER button to confirm. The self-timer function is now ready for use.
6. Aim at the object you wish to take photo.
7. Press the SHUTTER button to take a photograph.
8.
The photo will be taken after the timer reaches the delay time that you pre-setted and the
camera will beep during the delay time.
5.8 Recording video clips
1. Press the MODE button to select the video clip mode( ).
2. For setting the resolution, Press MENU ( ) button and select Resolution, then press the
SHUTTER button to confirm. Two resolution will be displayed.
VGA (640 x 480) QVGA( 320 x 240).
3. Press the SHUTTER button to start recording video, press the SHUTTER button again to
stop recording. The video clip will now be saved as an AVI file in the camera memory.
5.9 Playback photographs
1. Press the( ) button to get into playback mode.
2. Press the left or right buttons to see photographs.
3. In full screen display , press the
T
( )
button to zoom in the photo.
4. To view images in thumbnail, press the
W
( ) button.
5. To shift the image in zoom-in mode, press the SHUTTER button then use the
up/down/left/right buttons.
6. Press the MENU ( ) button in Playback mode, press and hold MENU button again until
the menu options displayed. Select SLIDE SHOW and slide show time then press the
ENTER button to confirm. The pictures saved in your camera or your micro SD card will be
displayed in sequence automatically. To stop slide show, press ENTER button again.
5.10 Playback video clips
1. When video clips are displayed, press the SHUTTER button to start playing the video and
press the SHUTTER button again to pause the playback.
2. press right button to fast forward or press left button to rewind.
3. Press the down button to stop.
4. Press the mode button to exit.
5.11 Delete photographs and video clips
You can choose to delete a single photograph / video clip, or delete all the photographs / video
clips in the memory.
Follow the instructions given below to delete photograph.
1. Press the ( ) button to enter the playback mode.
2. Press left or right button to select photograph/video clip to be delete.
3. Press the MENU/delete button and select Delete This Image(Video) / All . （ ）
4. Press the SHUTTER button ,then select OK to confirm.
5. Press the mode button to exit.
NOTE: Select “All” and Press the SHUTTER button to confirm, all the pictures and videos will be
deleted.
6. Connecting to a PC
The unit can be connected to the computer as mass storage device and transfer photo/video files
for storage.
7. Specifications
Sensor 9.0 Mega pixel CMOS sensor
12.0 Mega pixels: (4032x3024)
9.0 Mega pixels: (3456 x 2592)
5.0 Mega pixels: (2560x1920)
3.0 Mega pixels: (2048x1536)
1.3 Mega pixels: (1280x960)
Image resolution
VGA: (640x480)
Lens F/2.8 f = 8.5mm
Focus range 0.5m. ~ Infinity
Macro mode 11cm – 18cm
Digital zoom 8x
Flash strobe Built-in ( Auto / force / off )
LCD display 2.7" TFT color display
White balance Auto / Daylight / Cloudy / Fluorescent / Tungsten
Video mode 20fps@VGA&30fps@QVGA with micro SD card
External memory card SD card supports up to 8GB
File format Picture: JPEG, Video: AVI
Self timer 10 seconds
PC interface USB 2.0
Power source 2xAAA alkaline batteries
8. System requirement
Operating system Windows XP / Vista or above
Mac 9.x or X.x
CPU Pentium III or above
RAM At least 64MB
Interface USB port
CD 4x speed CD ROM or above
9. Troubleshooting
Problem
Cause
Solution
Cannot turn on the camera
Low battery power.
Battery placed at wrong
polarities.
Replace or install the battery
correctly.
Photos can not be saved
when taking pictures.
The memory card or built-in
memory hasn’t been
formatted properly.
Format the memory in setup
mode of the camera. Please
refer to section 5.3.
Cannot find removable disk
after connecting the
camera to the computer
.
Connection failure. Make sure all cable connections
are secured and restart the
computer if necessary.
Flash does not work. Battery power is too low. Replace with new 2xAAA
alkaline batteries.
The batteries used up very
fast.
Incorrect or old, used up,
battery
Replace with new 2xAAA
alkaline batteries.
The photos are blurry 1. The camera is not held
steadily
2. The lens of camera is
dirty.
1. Hold the camera steadily until
it beeps when taking video
photo.
2. Clean the lens with soft dry
cloth.
For EU only
AM-TDC9J4-AGB-CLV-1

Product specificaties

Merk: Easypix
Categorie: Fotocamera
Model: V912

Heb je hulp nodig?

Als je hulp nodig hebt met Easypix V912 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Fotocamera Easypix

Easypix

Easypix 35 Handleiding

28 September 2023
Easypix

Easypix V10 Handleiding

10 Juni 2023
Easypix

Easypix W508 Handleiding

6 Juni 2023
Easypix

Easypix SC500 Handleiding

27 Mei 2023
Easypix

Easypix W311 Handleiding

18 Mei 2023
Easypix

Easypix Octonauts Handleiding

6 Mei 2023
Easypix

Easypix S318 Handleiding

5 Mei 2023
Easypix

Easypix Jelly Baby Handleiding

3 Mei 2023
Easypix

Easypix W1400 Active Handleiding

22 April 2023
Easypix

Easypix V512 Handleiding

16 April 2023

Handleiding Fotocamera

Nieuwste handleidingen voor Fotocamera

VTech

VTech Movie Magic DigiCam Handleiding

16 November 2024
Konica Minolta

Konica Minolta X-700 Handleiding

16 November 2024
Olympus

Olympus Tough TG-805 Handleiding

15 November 2024
Ring

Ring Spotlight Cam Pro Battery Handleiding

15 November 2024
Bushnell

Bushnell Ninja Cam 119734C Handleiding

15 November 2024
Bushnell

Bushnell Core DS No Glow Handleiding

15 November 2024
Denver

Denver NVI-491 Handleiding

4 November 2024
Leica

Leica M11-D Handleiding

2 November 2024
Kogan

Kogan KAACAM35MMA Handleiding

23 Oktober 2024
Samsung

Samsung DV1506F Handleiding

1 Oktober 2024